Effect of Soil Failure on Soil‐Steel Structures
Publication: Journal of Geotechnical Engineering
Volume 112, Issue 5
Abstract
A plane‐strain finite element analysis procedure is used to investigate the interaction of soil failure and conduit instability in soil‐steel structures. Beam‐column elements, interface elements, constant strain and linear strain soil elements are used to simulate the combined soil‐steel structure. Hyperbolic models are employed for the interface elements and for the soil elements remote from the conduit; the beam elements can accommodate plastic hinge formation. An elasto‐plastic soil model represents the soil behavior in the severely stressed regions. A series of laboratory tests were conducted on a model conduit and reasonable agreement is noticed between the experimental and analytical results. The experimental and theoretical investigations clearly indicated the significant effect of the soil failure on the load carrying capacity of the soilsteel structure.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
AASHTO, Standard Specifications for Highway Bridges, American Association of State Highway and Transportation Officials, Washington, D.C., 1977.
2.
Dessouki, A. K., “Stability of Soil‐Steel Structures,” thesis presented to the Department of Civil Engineering, Univ. of Windsor, Windsor, Ontario, in 1985, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
3.
Duncan, J. M., and Chang, C. Y., “Nonlinear Analysis of Stress and Strain in Soils,” Journal of the Soil Mechanics and Foundations Division, ASCE, Vol. 96, No. SM5, 1970, pp. 1629–1653.
4.
Hafez, H. H., and Abdel‐Sayed, G., “Soil Failure in Shallow Covers above Flexible Conduits,” Canadian Journal of Civil Engineering, Vol. 10, 1983, pp. 654–661.
5.
Katona, M. G., “Effects of Frictional Slippage of Soil‐Structure Interfaces of Buried Culverts,” Transportation Research Board, Wasington, D.C., 1982.
6.
Lade, P. V., “Elasto‐Plastic Stress‐Strain Theory for Cohesionless Soil with Curved Yield Surfaces,” International Journal of Solids & Structures, Vol. 13, 1977, pp. 1019–1035.
7.
Madsen, J. H., “Development of Super Span Design,” paper presented at the 32nd Canadian Geotechnical Conference, Quebec, Quebec, Canada, 1979.
8.
Ontario Ministry of Transportation and Communications, Ontario Highway Bridge Design (OHBD) Code, Toronto, Ontario, Canada, 1983.
9.
Ozawa, Y., and Duncan, J. M., “Elasto‐Plastic Finite Element Analysis of Sand Deformations,” paper prepared for the 2nd International Conference on Numerical Methods in Geomechanics, Blacksburg, Va., June 20–26, 1976, pp. 243–263.
10.
Seely, F. B., and Smith, J. O., Advanced Mechanics of Materials, Wiley, New York, N.Y., 1959.
11.
Wong, K. S., and Duncan, J. M., “Hyperbolic Stress‐Strain Parameters for Nonlinear Finite Element Analysis of Stresses and Movements in Earth Masses,” Geotechnical Engineering Report, TE 74‐3, Univ. of California, Berkeley, Calif., 1974.
12.
Zienkiewicz, O. C., The Finilte Element Method, McGraw‐Hill Book Co., New York, N.Y., 1977.
Information & Authors
Information
Published In
Copyright
Copyright © 1986 ASCE.
History
Published online: May 1, 1986
Published in print: May 1986
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.