FE Analyses: Compaction‐Induced Stresses and Deformations
Publication: Journal of Geotechnical Engineering
Volume 112, Issue 1
Abstract
Analytical models and a finite element analysis methodology are presented for evaluation of compaction‐induced soil stresses and resulting soilstructure interaction effects. These analytical methods model the incremental placement and compaction of soil, and are based on a hysteretic model for residual soil stresses induced by multiple cycles of loading and unloading. Compaction loading is realistically considered as a transient, moving, surficial load of finite lateral extent, which passes one or more times over some specified portion of the fill surface at each stage of backfill compaction. Multiple compaction passes at a given fill stage are modeled using a single solution increment. Several case studies are presented in which analytical results are compared with full‐scale field measurements of compaction‐induced stresses and deformations in order to verify the analytical methods presented.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Aggour, M. S., and Brown, C. B., “The Prediction of Earth Pressure on Retaining Walls Due to Compaction,” Geotechnique, Vol. 24, No. 4, 1974, pp. 489–502.
2.
Carder, D. R., Pocock, R. G., and Murray, R. T., “Experimental Retaining Wall Facility‐Lateral Stress Measurements with Sand Backfill,” Transport and Road Research Laboratory Report No. LR 766, 1977.
3.
Duncan, J. M., Byrne, P., Wong, K. S., and Mabry, P., “Strength, Stress‐Strain and Bulk Modulus Parameters for Finite Element Analyses of Stresses and Movements in Soil Masses,” Geotechnical Engineering Research Report No. UCB/GT/80‐01, Univ. of California, Berkeley, CA, 1980.
4.
Duncan, J. M., and Jeyapalan, J. K., “Deflection of Flexible Culverts Due to Backfill Compaction,” prepared for the Transportation Research Board Symposium on Soil‐Structure Interaction of Subsurface Conduits, 1981.
5.
Duncan, J. M., and Seed, R. B., “Compaction‐Induced Earth Pressures Under ‐Conditions,” Journal of Geotechnical Engineering, ASCE, Vol. 112, No. 1, 1986, pp. 1–22.
6.
Katona, M. G., “Analysis of Long‐Span Culverts by the Finite Element Method,” Transportation Research Record, No. 678, 1978, pp. 59–66.
7.
Mayne, P. W., and Kulhawy, F. H., “‐OCR Relationships in Soil,” Journal of the Geotechnical Engineering Division, ASCE, Vol. 108, No. GT6, 1982, pp. 851–872.
8.
Seed, R. B., and Duncan, J. M., “Soil‐Structure Interaction Effects of Compaction‐Induced Stresses and Deflections,” Geotechnical Engineering Research Report No. UCB/GT/83‐06, Univ. of California, Berkeley, CA, 1983.
9.
Seed, R. B., and Duncan, J. M., “SSCOMP: A Finite Element Analysis Program for Evaluation of Soil‐Structure Interaction and Compaction Effects,” Geotechnical Engineering Research Report No. UCB/GT/84‐02, Univ. of California, Berkeley, CA, 1984.
Information & Authors
Information
Published In
Copyright
Copyright © 1986 ASCE.
History
Published online: Jan 1, 1986
Published in print: Jan 1986
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.