Strength of Weathered Melbourne Mudstone
Publication: Journal of Geotechnical Engineering
Volume 110, Issue 7
Abstract
The mudstone underlying the Melbourne area forms the principal bearing stratum of the region. Because of its wide range of weathering characteristics, the mudstone is transitional between soils and more competent hard rocks. Little quantitative engineering data is available for these weak rocks and therefore a comprehensive series of laboratory tests including uniaxial compression tests, Brazilian tests, direct shear tests and triaxial compression tests, on several hundred individual intact specimens of the mudstone were performed. The variation of strength across a wide range of weathering characteristics is investigated. The suitability of several failure criteria is examined. A new nonlinear criterion is proposed and is shown to adequately predict the strength of the mudstone for the range of testing conditions considered.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Adachi, T., and Ogawa, T., “Strength Characteristics and Failure Criterion of Soft Sedimentary Rock,” Proceedings 12th Symposium Rock Mechanics, Japanese Society of Civil Engineers, 1979, pp. 41–45.
2.
Balmer, G., “A General Analytic Solution for Mohr's Envelope,” Proceedings, Am. Soc. Test. Mat., Vol. 52, 1952, pp. 1260–1271.
3.
Bieniawski, Z. T., “Mechanism of Brittle Fracture of Rock,” Part II—Experimental Studies, International Journal Rock Mech. Min. Sci., Vol. 4, No. 4, 1967, pp. 407–423.
4.
Bieniawski, Z. T., “Estimating the Strength of Rock Materials,” S. Afr. Inst. Min. Metal., Vol. 74, 1974, pp. 312–320.
5.
Bishop, A. W., “The Strength of Soils as Engineering Materials,” Geotechnique, Vol. 16, No. 2, 1966, pp. 91–128.
6.
Brown, E. T., ed., Rock Characterization Testing and Monitoring, ISRM Suggested Methods, Pergamon Press, 1981.
7.
Byerlee, J. D., “Frictional Characteristics of Granite under High Confining Pressure,” Journal of Geophysical Research, Vol. 72, No. 14, 1967, pp. 3639–3648.
8.
Chandler, R. J., “The Effect of Weathering on the Shear Strength Properties of Keuper Marl,” Geotechnique, Vol. 19, No. 3, 1969, pp. 321–334.
9.
Chiu, H. K., “Geotechnical Properties and Theoretical Analyses for Socketed Pile Design in Weak Rock,” thesis presented to Monash University, at Melbourne, in 1981, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
10.
Chiu, H. K., and Johnston, I. W., “The Effect of Drainage Conditions and Confining Pressure on the Strength of Melbourne Mudstone,” Proceedings, 3rd Australia‐New Zealand Conference on Geomechanics, Vol. 1, Wellington, 1980, pp. 185–189.
11.
Chiu, H. K., and Johnston, I. W., “The Uniaxial Properties of the Melbourne Mudstone,” Proceedings, 5th I.S.R.M, Cong., Melbourne, Section A, 1983, pp. A209–A214.
12.
Chiu, H. K., Johnston, I. W., and Donald, I. B., “Appropriate Techniques for Triaxial Testing of Soft Rock,” Int. J. Rock Mech. Min. Sci., Vol. 20, No. 3, 1983, pp. 107–120.
13.
Cole, W. F., Lancucki, C. J., and Nickson, N. M., “Ceramic Clays and Shales from the Melbourne Area, I. Mineralogy and Particle Size Distributions,” Tech. Paper No. 22, CSIRO Div. Building Res., Australia, 1968.
14.
Fairhurst, C., “On the Validity of the ‘Brazilian’ Test for Brittle Materials,” Int. J. Rock Mech. Min. Sci., Vol. 1, No. 4, 1964, pp. 535–546.
15.
Franklin, J. A., “Triaxial Strength of Rock Materials,” Rock Mechanics, Vol. 3, 1971, pp. 86–98.
16.
Griffith, A. A., “The Phenomena of Rupture and Flow in Solids,” Phil. Trans. Roy. Soc., A 221, 1921, pp. 163–198.
17.
Griffith, A. A., “Theory of Rupture,” Proceedings, 1st Int. Cong. Appl. Mech., Delft, The Netherlands, 1924, pp. 55–63.
18.
Hobbs, D. W., “A Study of the Behaviour of a Broken Rock under Triaxial Compression, and Its Application to Mine Roadways,” Int. J. Rock Mech. Min. Sci., Vol. 3, 1966, pp. 11–43.
19.
Hobbs, D. W., “The Behaviour of Broken Rock under Triaxial Compression,” Int. J. Rock Mech. Min. Sci., Vol. 7, No. 2, 1970, pp. 125–148.
20.
Hoek, E., “Brittle Failure of Rock,” “Rock Mechanics in Engineering Practice,” K. G. Stagg, and O. C. Zienkiewicz, eds., John Wiley and Sons, 1968, pp. 99–124.
21.
Hoek, E., and Brown, E. T., “Empirical Strength Criterion for Rock Masses,” Journal of the Geotechnical Engineering Division, ASCE, Vol. 106, GT9, 1980, pp. 1013–1035.
22.
Hondros, G., “The Evaluation of Poisson's Ratio and the Modulus of Materials of a Low Tensile Resistance by the Brazilian (Indirect Tensile) Test with Particular Reference to Concrete,” Australian Journal of Applied Science, Vol. 10, 1959, pp. 243–264.
23.
Jaeger, J. C., and Cook, N. W., Fundamentals of Rock Mechanics, Science Paperbacks, Chapman and Hall, London, England, 1976.
24.
Johnston, I. W., and Chiu, H. K., “The Consolidation Properties of a Soft Rock,” Proceedings, 10th Int. Conf. Soil Mech. and Found. Engrg., Stockholm, Sweden, 1981, pp. 661–664.
25.
Johnston, I. W., Williams, A. F., and Chiu, H. K., “Properties of Soft Rock Relevant to Socketed Pile Design,” Int. Conf. Structural Foundations on Rock, Sydney, A. A. Balkema, 1980, pp. 55–64.
26.
Lam, T. S. K., and Johnston, I. W., “A Constant Normal Stiffness Direct Shear Machine,” Proceedings, 7th S‐E Asian Geotech. Conf., Hong Kong, China, 1, 1982, pp. 805–820.
27.
Learmonth, A. P., and Garrett, B. K., “Strength and Deformation Characteristics of Victorian Silurian Bedrock,” Proceedings, Syntp. Rock Mech., Inst. Eng. Aust., Sydney, 1969, pp. 14–19.
28.
Little, A. L., Vote of Thanks Proposal to 16th Rankine Lecturer, Geotechnique, Vol. 26, No. 3, 1976, pp. 451–452.
29.
McClintock, F. A., and Walsh, J. B., “Friction on Griffith Cracks in Rocks under Pressure,” Proceedings, 4th U.S. Nat. Cong. Appl. Mech., Vol. 2, Berkeley, Calif., 1962, pp. 1015–1021.
30.
Mogi, K., “Pressure Dependence of Rock Strength and Transition from Brittle Fracture to Ductile Flow,” Bull. Earthquake Res. Inst., Vol. 44, 1966, pp. 215–232.
31.
Murrell, S. A. F., “A Criterion for Brittle Fracture of Rocks and Concrete under Triaxial Stress and the Effect of Pore Pressure on the Criterion,” Proceedings, 5th Rock Mech. Symp., Univ. of Minnesota, Pergamon, 1963, pp. 563–577.
32.
Murrell, S. A. F., “The Effect of Triaxial Stress Systems on the Strength of Rocks at Atmospheric Temperatures,” Geophysical Journal, Vol. 10, 1965, pp. 231–281.
33.
Parry, R. H. G., “Triaxial Tests on Melbourne Mudstone,” Journal Inst. Eng. Aust., Vol. 42, No. 1–2, 1970, pp. 5–8.
34.
Vutukuri, L. S., Lama, R. D., and Saluja, S. S., Handbook on Mechanical Properties of Rocks I., Trans Tech Publications, 1974.
35.
Walker, L. K., “Analysis of Some Pressuremeter Results Obtained in Melbourne's Silurian Mudstones,” Workshop on Engineering Properties of Melbourne Mudstone, Aust. Geomech. Soc., Victorian Group, 1977.
36.
Williams, A. F., The Design and Performance of Piles Socketed into Weak Rock, thesis presented to Monash University at Melbourne, in 1980, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
37.
Williams, A. F., Johnston, I. W., and Donald, I. B., “The Design of Socketed Piles in Weak Rock,” Proceedings, Int. Conf. Structural Foundations on Rock, Sydney, A. A. Balkema, 1980, pp. 327–347.
38.
Wuerker, R. G., “Annotated Tables of Strength of Rock,” Transactions AIME, Pet. Branch, Paper N‐663‐G, 1956.
39.
Yoshinaka, R., and Yamabe, T., “Strength Criterion of Rocks,” Soils and Foundations, Vol. 20, No. 4, 1980, pp. 113–126.
Information & Authors
Information
Published In
Copyright
Copyright © 1984 ASCE.
History
Published online: Jul 1, 1984
Published in print: Jul 1984
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.