Past Consolidation Stress Estimates in Cretaceous Clay
Publication: Journal of Geotechnical Engineering
Volume 110, Issue 2
Abstract
It is shown in this paper that in a highly overconsolidated undis turbed clay, due to natural unloading, most of the strain was recovered in the vertical direction, but not in the horizontal direction. Consolidation tests were performed on both undisturbed and remolded specimens, with the specimens oriented as in conventional tests (V‐test) and at right angle (H‐test). Estimated precompression stress for V‐tests was considered inadequate to define the max imum past consolidation stress. Estimated precompression stress from H‐tests was comparatively higher, and gave a more realistic estimate for maximum past consolidation stress. However, when the soil was allowed to swell at a low stress, the H‐tests also behaved similar to the V‐tests. It is postulated, that, the lesser the degree of strain recovery since the unloading of the soil, the better is the estimate for precompression stress. Electron micrographs showed no pre ferred particle orientation for undisturbed specimens in the natural state and after loading to 26 tsf (2.6 MPa). For remolded samples, conventional tests yielded accurate values of maximum precompression stress.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bernhard, H., “Der Drucksetzungsversuch als Hilfsmittel zur Ermittlung der Machtigkeit des Pleistozäner Inlandeises in Nordwest Niedersachsen,” thesis presented to the Technische Hochschule at Braunschweig, Germany, in 1963, for the degree of Doktor der Naturwissenschaften.
2.
Bishop, A. W., Webb, D. L., and Lewin, P. I., “Undisturbed Samples of London Clay from the Ashford Common Shaft: Strength‐Effective Stress Re lationship,” Geotechnique, Vol. 15, No. 1, Mar., 1965, pp. 1–31.
3.
Bjerrum, L., “Progressive Failure in Slopes of Overconsolidated Plastic Clay and Clay Shales,” Journal of the Soil Mechanics and Foundations Division, ASCE, Vol. 93, No. SM5, Sept., 1967, pp. 1–50.
4.
Cooling, L. F., and Skempton, A. W., “A Laboratory Study of London Clay,” Journal of the Institution of Civil Engineers, Vol. 17, 1942, pp. 251–256.
5.
Dietz, C., 1973, “Erläuterungen zu Blatt Lehrte Nr. 3625,” Niedersächsisches Landesamt für Bodenforschung.
6.
Khera, R. P., and Krizek, R. J., “Effect of Principal Consolidation Stress Dif ference on Undrained Shear Strength,” Soils and Foundation, Vol. 8, No. 1, Mar., 1968, pp. 1–17.
7.
Khera, R. P., and Schulz, H., “Anisotropic im Lastsetzungs—Festigkeits‐verhalten eines Kreidetons von Anderten,” Zwischenbericht, Bundesanstalt fur Wasserbau, Karlsruhe, Germany, Aug., 1981.
8.
Lambe, T. W., and Whitman, R. W., “Stress‐Strain Relations for Drained Conditions,” Soil Mechanics, John Wiley and Sons, Inc., New York, N.Y., 1969, p. 320.
9.
Mattiat, B., “Eine Methode zun Electronenmikroskopischen Untersuchung des Mikrogefuges in Tonigen Sedimenten,” Geologischen Jahresbericht, Vol. 88, Oct., 1969, pp. 87–111.
10.
Schmertmann, J., “The Undisturbed Consolidation of Clay,” Transactions, ASCE, Vol. 120, 1955, pp. 1201–1232.
11.
Skempton, A. W., and Henkel, D. J., “Tests on London Clay from Deep Borings at Paddington, Victoria, and the South Bank,” Proceedings, Fourth International Conference on Soil Mechanics and Foundation Engineering, London, England, Vol. 1, 1957, pp. 100–106.
12.
Steinfeld, K., “Uber Grenzen der Grundbaumechanischen Praxis,” Vqrtrag, Karl‐Hillmer‐Gesellschaft e.v., Hamburg, Germany, 1970, pp. 1–31.
Information & Authors
Information
Published In
Copyright
Copyright © 1984 ASCE.
History
Published online: Feb 1, 1984
Published in print: Feb 1984
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.