Effect of Envelope on Residential Cooling Load Coupled with Use of Solar/Photovoltaic Panels
Publication: Journal of Energy Engineering
Volume 132, Issue 2
Abstract
Three identically oriented homes were used for the study. Two of the homes were identically constructed using wood frame/stucco construction while the third used a wall of sandwiched Styrofoam in between concrete layers. It was found that the concrete house on the average consumed about 15% less energy for HVAC operation than the wood frame houses. Also the photovoltaic array placed on the roofs of two of the houses indicated a reduction in electrical energy consumption from the grid of about 20% of the HVAC electrical energy consumed. TRACE-700 simulation runs were made on both types of houses to determine the design cooling load for each of the houses and the total consumed electrical energy for each house over the whole year on a monthly basis. It was found that in the summer a 20% reduction of electrical energy for HVAC is predicted due to the use of the concrete house as compared to the wood frame homes. In addition a linear correlation was found to represent reasonably well the variation of the daily kilowatt hour versus the daily degree day value for a typical summer month in the Las Vegas, Nev. valley for all three houses. The slope of that line for the concrete home was about 24% less steep than the line for the wood frame construction confirmation in part theoretical calculations that this wall construction is more energy conserving than the base case.
Get full access to this article
View all available purchase options and get full access to this article.
References
Erge, T., Haw, L. C., and Lim, C. (2003). “PV in buildings for Malaysia prototype solar house.” Proc., 3rd World Conf. on Photovoltaic Energy Conversion, Vol. C, 2358–2361.
Fagbenle, S. (2003). “The role of PVs in the zero energy home.” Photovoltaics Bulletin, June, 8–9.
Gadja, J. (2001). “Energy use of single-family houses with various exterior walls.” Portland Cement Association, Stokie, Ill.
Greenberg, S., Mills, E., Lockhart, D., Sartor, D., and Lintner, W. (1996). “U.S. Department of Energy’s in-house energy management program ‘Meeting the challenges of federal energy management.’ ” Energ. Eng., 93(2), 55–75.
Haas, R. (1997). “Successful dissemination programs for residential PV applications - an international survey.” Proc., Conf. Record of the IEEE Photovoltaic Specialists Conf., 1231–1236.
Holz, K. (2000). “Holzbau auf licht und sonne bauen. Neues passivhaus vario del sole.” (Timber construction. Build on light and sun. The new Vario del Sole passive house), 55(43), Oct 26, 17.
Iqbal, S. (2004). “A feasibility study of a zero energy home in Newfoundland.” Renewable Energy, 29(2), 277–289.
Khedari, J., Rungsiyopas, M., Sarachitti, R., and Hirunlabh, J. (2004). “A new type of vented concrete block for zero cooling energy.” Build. Environ., 39(10), 1193–1197.
Kosny, J., and Christian, J. E. (1995). “Thermal evaluation of several configurations of insulation and structural materials for some metal stud walls.” Energy Build., 22, 157–163.
Kosny, J., Christian, J. E., Desjarlais, A. O., Kossecka, E., and Berrenberg, L. (1998). “Performance check between whole building thermal performance criteria and exterior wall measured clear wall R-value, thermal bridging, thermal mass, and air tightness.” ASHRAE Trans., 104(2), 1379–1389.
Kosny, J., and Desjarlais, A. O. (1994). “Influence of architectural details on the overall thermal performance of residential wall systems.” Oak Ridge National Laboratory, Building Technology Center, Oak Ridge, Tenn.
Kurokawa, K. (1994). “Japanese activities for introducing residential PV systems as a national energy supply.” Conf. Record of the IEEE Photovoltaic Specialists Conf. Proc., 1st World Conf. on Photovoltaic Energy Conversion, Vol. 1, 48–51.
Liu, J., and Yang, L., (1999). “Thermal design of a zero energy cave-dwelling solar house.” Taiyangneng Xuebao/Acta Energiae Solaris Sinica, 20(3), July, 302–310.
Macagno, S. (2002). “Zero net energy houses.” Photovoltaics Bulletin, August, 6.
Macagno, S., Santarelli, M., Borchiellini, R., and Cali, M. (2002). “Simulation of a PV-micro-hydro-hydrogen system feeding the energy requests of a residential building in a remote area of the Alps. II: Integrated system.” AES, 42, 173–181.
Matthews, H. S., Cicas, G., and Aguirre, J. L. (2004). “Economic and environmental evaluation of residential fixed solar photovoltaic systems in the United States.” J. Infrastruct. Syst., 10(3), 105–110.
Miller, L. (2004). “Expanding the possibilities of concrete construction.” Concrete, 38(7), 20–21.
Nakagami, H., Sakai, K., Ishihara, O., and Tanaka, A. (2003). “Performance of residential PV system under actual field conditions in western part of Japan.” Proc., Int. Solar Energy Conf. 491–497.
Nishioka, K., et al. (2003). “Analysis of grid-connected PV systems for residential houses in the Tokyo area focusing on module temperature.” Proc., 3rd World Conf. on Photovoltaic Energy Conversion, Vol. C, 2306–2309.
Nonaka, S. (1994a). “Suitable single-phase PWM current source inverter for utility connected residential PV system.” Sol. Energy Mater. Sol. Cells, 35(1-4), 437–444.
Nonaka, S. (1994b). “Utility-connected residential PV system adapted a novel single-phase composite PWM voltage source inverter.” Conf. Record of the IEEE Photovoltaic Specialists Conf. Proc., 1st World Conf. on Photovoltaic Energy Conversion, Vol. 1, 1064–1068.
Parker, D., et al. (2000). “Towards zero energy demand evaluation of super efficient building technology with photovoltaic power for new residential housing.” Proc., ACEEE Summer Study on Energy Efficiency in Buildings, Vol. 1, 1207–1223.
Shariah, A., Shalabi, B., Rousan, A., and Tashtoush, B. (1998). “Effects of absorptance of external surfaces on heating and cooling loads of residential buildings in Jordan.” Energy Convers. Manage., 39(3–4), 273–284.
Tanaka, K., Makino, Y., Sakoguchi, E., and Takeoka, A. (1994). “Residential solar-powered air conditioners.” Kuwano, Yukinori Electrical Engineering Japan 114(3), 123–133.
Tanaka, K., Sakoguchi, E., Fukuda, Y., Takeoka, A., and Tokizaki, H. (1993). “Residential solar-powered air conditioner.” IEE Conf. Publ., 8(377), 127–132.
Vanderwerf, P. (1997). Energy comparisons of concrete homes versus wood frame building works, Portland Cement Association, Stokie, Ill.
Wassmer, M., Brandemuehl, M. J., Jackaway, A. (2003). “The simulation of a zero-energy residential building for the solar decathlon competition.” Proc., Int. Solar Energy Conf., 45–53.
Yoon, S., and Hoyano, A. (1998). “Passive ventilation system that incorporates a pitched roof constructed of breathing walls for use in a passive solar house.” Sol. Energy, 64(4-6), 189–195.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Dec 7, 2004
Accepted: Aug 8, 2005
Published online: Aug 1, 2006
Published in print: Aug 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.