Hydrodynamic Modeling of Coastal LNG Cooling Water Discharge
Publication: Journal of Energy Engineering
Volume 129, Issue 1
Abstract
The evaluation of the mixing zone for a proposed expansion to a liquefied natural gas facility on the northeast coast of the State of Qatar in support of an environmental impact assessment was performed using the Generalized Environmental Modeling System for Surface Waters (GEMSS). The circulating seawater at the facility absorbs heat during the liquefaction of natural gas, resulting in a maximum temperature rise of 10°C. The heated seawater is discharged through a long canal into the Arabian Gulf with minimum jet momentum. GEMSS was calibrated, verified, and then used to model the thermal plume for a proposed expansion of the facility. A probabilistic approach for defining the mixing zone using World Bank standards was developed. Model results show that the thermal plume is vertically stratified, with a relatively large surface area and a relatively small bottom contact area. The advantage of this design is that it maximizes heat exchange with the atmosphere by increasing the driving force and isolating the temperature increase from benthic organisms.
Get full access to this article
View all available purchase options and get full access to this article.
References
Al-Madfa. (2000). “Ras Laffan baseline ecological surveys—Bathymetry, tides, current measurements, temperature and chlorine, biology, chemical and remote sensing 1998, 1999 and 2000.” SARC, University of Qatar.
Edinger, J. E., and Kolluru, V. S. (1999). “Implementation of vertical acceleration and dispersion terms in an otherwise hydrostatically approximated 3-D model.” M. L. Spaulding, and H. L. Butler, eds, Proc. 6th Int. Conf. on Estuarine and Coastal Modeling, 1019–1034.
Edinger, J. E., and Buchak, E. M. (1980). Numerical hydrodynamics of estuaries in estuarine and wetland processes with emphasis on modeling, P. Hamilton and K. B. Macdonald, eds. Plenum, New York.
Kolluru, V. S., Buchak, E. M., and Wu, J. (1999). “Use of membrane boundaries to simulate fixed and floating structures in GLLVHT.” M. L. Spaulding, and H. L. Butler, eds., Proc. 6th Int. Conf. on Estuarine and Coastal Modeling, 485–500.
RasGas. (2000a). “3-D thermal modeling of the Ras Laffan LNG trains 1 and 2 cooling water outfall.” Rep. prepared for Ras Laffan Liquefied Natural Gas Company Limited, Doha, State of Qatar by J. E. Edinger Associates, Inc., Wayne, Pa.
RasGas. (2000b). “3-D thermal modeling of the Ras Laffan LNG four-train cooling water outfall.” Rep. prepared for Ras Laffan Liquefied Natural Gas Company Limited, Doha, State of Qatar by J. E. Edinger Associates, Inc. Wayne, Pa.
U.S. Export-Import Bank. (2000). “Ex-Im Bank Environmental Guidelines.” 〈http://www.exim.gov/envguide.html;http://www.exim.gov/envtbl5.html〉.
U.S. Environmental Protection Agency (USEPA). (1995). “Clean Water Act section 403: A framework for ecological risk assessment.” Rep. No. EPA 1842-F-94-001, Office of Water (4504F), Washington, D.C.
World Bank. (1998). Pollution prevention and abatement handbook: Towards cleaner production. The World Bank, Washington, D.C.
Wu, J., Buchak, E. M., Edinger, J. E., and Kolluru, V. S.(2001). “Simulation of cooling-water discharges from power plants.” J. Environ. Manage., 61, 77–92.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Oct 9, 2002
Accepted: Nov 6, 2002
Published online: Mar 14, 2003
Published in print: Apr 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.