Productivity of Ocean-Wave-Energy Converters: Turbine Design
Publication: Journal of Energy Engineering
Volume 128, Issue 2
Abstract
A study was undertaken to identify which of a range of advanced Wells turbine configurations would maximize wave power productivity. The productivity is estimated of a monoplane with fixed guide vanes, a monoplane with variable-pitch blades, and a high- and low-solidity biplane with counterrotating rotors. Two control mechanisms are investigated for the variable pitch configuration. Raleigh distributions based on a mean annual pneumatic power rating of 500 kW are utilized to generate the short and long-term variations of input power to be matched with experimental turbine performance data obtained from a steady-state test rig. It was found that productivity was relatively insensitive to turbine configuration but that a low-solidity counterrotating turbine had the best performance characteristic providing high peak efficiency and gradual onset of stall.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abbott, I. H., and Von Doenhoff, A. E. (1959). Theory of wing sections, 2nd Ed., Dover, New York.
Count, B. (1980). Power from sea waves, Academic, New York.
Curran, R., and Gato, L. C.(1997). “The energy conversion performance of several types of wells turbine designs.” J. Power Energy, 211, 133–145.
Curran, R., Stewart, T. P., and Whittaker, T. J. T.(1997). “Design synthesis of OWC wave energy converters: Performance matching.” J. Power Energy, 211, 489–505.
Curran, R., Whittaker, T. J. T., Raghunathan, S., and Beattie, W. C.(1998a). “Performance prediction of counterrotating wells turbine for wave energy converter design.” J. Energy Eng., 124(2), 35–53.
Curran, R., Whittaker, T. J. T., and Stewart, T.(1998b). “Aerodynamic conversion of power from wave to wire.” J. Energy Convers. Mgmt., 39, 1919–1929.
Curran, R., Kundu, A., Raghunathan, S., and Eakin, D.(2001). “Cost tools for decision making within integrated aerospace design.” Concurrent Engineering Research and Applications Journal: Cost Engineering in CE, 9(4), 327–340.
Evans, D. V.(1982). “Wave power absorption by systems of oscillating pressure distributions.” J. Fluid Mech., 114, 481–499.
Falcao, A. F., Whittaker, T. J. T., and Lewis, A. W. (1994). “Joule 2, preliminary action: European pilot plant study.” European Commission Rep., JOUR-CT912-0133, Science Research and Development—Joint Research Center.
Gato, L. M. C., and Falcao, A. F.(1989). “Aerodynamics of the wells turbine: Control by swinging rotor-blades.” Int. J. Mech. Sci., 31, 425–434.
Horlock, J. H. (1966). Axial flow turbines: Fluid mechanics and thermodynamics, Butterworths, London.
Inoue, M., Kaneko, K., and Setoguchi, T.(1987). “The fundamental characteristics and future of wells turbine for wave power generator.” Sci. Machines, 39(2), 275–280.
Jacobs, E., and Sherman, A. (1937). “Aerofoil section characteristics as affected by variations of the Reynolds number.” Rep. No. 586, National Advisory Committee for Aeronautics.
Malmo, O., and Reitan, A.(1985). “Wave power absorption by an oscillating water column in a channel.” J. Fluid Mech., 158, 153.
Raghunathan, S.(1995). “A methodology for wells turbine design for wave energy conversion.” J. Power Energy, 209, 221–232.
Raghunathan, S., Curran, R., and Whittaker, T. J. T.(1995). “Performance of the Islay wells turbine.” J. Power Energy, 209, 55–62.
Raghunathan, S., and Beattie, W. C.(1996). “Aerodynamic performance of counter-rotating wells turbine for wave energy conversion.” J. Power Energy, 210, 431–447.
Salter, S. H.(1988). “World progress in wave energy.” Int. J. Ambient Energy, 10, 3–24.
Setoguchi, T., Kaneko, K., Matsuki, E., Hamakawa, H., and Inoue, M. (1988). “Some techniques to improve the performance of the biplane wells turbine for wave power generator.” Proc., 1st Pacific/Asia Offshore Mech. Symp., Vol. 1., International Society of Offshore and Polar Engineers, Lupertino, Calif.
Wells, A. A. (1976). Fluid Driven Rotary Transducer, British Patent Spec., 1 595 700.
White, P. R. S. (1991). “A phenomenological design tool for wells turbines.” Proc., IMechE Wave Energy Seminar, 53–60.
White, P. R. S. (1995). “The effect of non-axisymmetric flow on wells turbine performance.” Proc., 2nd European Wave Energy Conf., Lisbon, 226–231.
Whittaker, T. J. T., Beattie, W. C., Raghunathan, S., Thompson, A., Stewart, T., and Curran, R. (1997a). “The Islay wave power project: An engineering perspective.” Water Maritime and Energy, ICE, 189–201.
Whittaker, T. J. T., Thompson, A., Curran, R., and Stewart, T. P. (1997b). European Wave Energy Pilot Plant on Islay (UK), European Commission, Directorate General XII, Science, Research and Development—Joint Research Centre, JOU-CT94-0267.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Oct 8, 2001
Accepted: Feb 19, 2002
Published online: Jul 15, 2002
Published in print: Aug 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.