Ultimate Load Capacities of Expansion Anchor Bolts
Publication: Journal of Energy Engineering
Volume 119, Issue 2
Abstract
A summary of available experimental expansion anchor bolt test data is presented. These data were collected as part of programs by the nuclear industry to address generic issues related to verification of seismic adequacy of equipment in nuclear power plants. Some of the data presented are suitable for use in seismic probabilistic risk assessments. For example, mean values of ultimate strength, along with their standard deviation and coefficients of variation, for a range of most typical expansion anchor bolt sizes are presented. Effects of interaction between shear and tension, edge distance, spacing, and cracking of the concrete are presented in a manner that is more suitable for use in deterministic evaluations. Related industry programs to derive anchor bolt capacities are briefly discussed. Recommendations for areas of further investigation are also presented.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Cannon, R. W. (1981). “Expansion anchor performance in cracked concrete.” TVA Rep. Tennessee Valley Authority, Knoxville, Tenn.
2.
“Development of improved guidelines and criteria for nuclear piping and support evaluation and design—task 3: anchor bolt capacity and installation tolerance.” (1991). Teledyne Rep. Electric Power Research Institute, Palo Alto, Calif.
3.
Eligehausen, R. (1984a). “Metallic expansion anchors in the tension zone of reinforced concrete members.” American Concrete Inst. Annual Convention, American Concrete Institute, Detroit, Mich.
4.
Eligehausen, R. (1984b). “Interaction of fastenings and reinforced concrete constructions.” Fortschritte in Konstruktiven, Verlag Wilhelm Ernst & Sohn, Berlin, Germany (in German).
5.
Eligehausen, R., Fuchs, W., and Mayer, B. (1988). “Load bearing behavior of anchor fastenings in tension.” Betonwerk und Fertigteil‐Technik, Vol. 1.
6.
Eligehausen, R., Fuchs, W., Lotze, D., and Reuter, M. (1989). “Fastening in concrete tensile zone.” Beton und Stahlbetonbau, 84(2, 3) (in German).
7.
Eligehausen, R. (1991). “Behavior, design and testing of anchors in cracked concrete.” Anchors in concrete—design and behavior; ACI SP‐130‐5, American Concrete Institute, Detroit, Mich.
8.
Fastening to reinforced concrete masonry structures, state‐of‐the‐art report. (1991). Comité Euro‐International du Béton, Lausanne, Switzerland.
9.
Generic implementation procedure for seismic verification of nuclear power plant equipment: revision 2. (1992). Seismic Qualification Utility Group (SQUG), Washington, D.C.
10.
Kennedy, R. P., and Reed, J. W. (1992). Fragility evaluation for probabilistic risk assessments for nuclear power plants. North Carolina State Univ., Raleigh, N.C.
11.
“A Methodology for assessment of nuclear power plant seismic margin (revision 1).” EPRI Rep. No. NP‐6041‐SL, Electric Power Research Institute, Palo Alto, Calif.
12.
Poporad, C. J. (1988). “Code of federal regulations, part 21 reportable item—expansion anchor edge distance.” Letter from Hilti Corp., Tulsa, Okla., to R. D. Martin, USNRC, Region 4, Arlington, Tex., U.S. Nuclear Regulatory Commission, Washington, D.C.
13.
Rehm, G., Eligehausen, R., and Mallee, R. (1988). “Befestinungstechnic (fastening techniques),” Beton‐Kalender, Ernst & Sohn, Berlin, Germany (in German).
14.
“Seismic verification of nuclear plant equipment anchorage.” (1991). EPRI Rep. No. NP‐5228‐SL, Revision 1, Vol. 1, Electric Power Research Institute, Palo Alto, Calif.
15.
“Verification of seismic adequacy of mechanical and electrical equipment in operating reactors, unresolved safety issue A‐46.” (1987). NRC Generic Letter 87‐02. Nuclear Regulatory Commission, Washington, D.C.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Feb 4, 1993
Published online: Aug 1, 1993
Published in print: Aug 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.