Superplasticized Structural Concrete Containing High Volume of Class C Fly Ash
Publication: Journal of Energy Engineering
Volume 117, Issue 2
Abstract
This research is conducted with a view to investigate performance of concrete containing high volumes of ASTM Class C fly ash. A portland cement concrete, proportioned to have 28‐day compressive strength of 6,000 psi (41 MPa) is used in this study. Concrete mixes are also proportioned to have various levels of cement replacement by fly ash ranging from 40% to 70% by weight. Concrete performance is evaluated with respect to compressive strength, tensile strength, and modulus of elasticity. At a 28‐day age, concrete containing fly ash consistently shows higher compressive strength compared to the no‐fly ash concrete. Analysis of results shows that ASTM Class C fly ash could be substituted for cement replacements up to 70% to achieve design compressive strength levels greater than 6,000 psi (41 MPa).
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Cuijuan, S., Luoshu, G., and Haimin, W. (1986). “Concrete made with calcium‐enriched fly ash.” Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, Proc. of the Second International Conference, American Concrete Institute, I, 387–412.
2.
Davis, R. E., Carleson, R. W., and Davis, H. E. (1937). “Properties of cement and concrete containing fly ash.” ACI J., 33(May–Jun), 577–612.
3.
Dodson, V. H. (1983). “High percentage use of fly ash in concrete.” Fly Ash Concrete, Denver Fly Ash Concrete, Inc. and Los Angeles Fly Ash Symposium, Inc., 801‐01–802‐21.
4.
Ghosh, R. S., and Timusk, J. (1981). “Creep of fly ash concrete.” ACI J., 78(5), 351–357.
5.
Hague, M. N., Langan, B. M., and Ward, M. A. (1984). “High fly ash concretes.” ACI J., 81(1), 54–60.
6.
Naik, T. R., and Ramme, B. W. (1986). “Low cement content high strength structural grade concrete with fly ash.” 1986 Fall Convention, American Concrete Inst., Baltimore, Maryland.
7.
Naik, T. R., and Ramme, B. W. (1987). “Setting and hardening of high fly ash content concrete.” American Coal Ash Assoc. 8th Int. Coal Ash Utilization Symp., American Coal Ash Association.
8.
Naik, T. R., and Ramme, B. W. (1989). “High strength concrete containing large quantities of fly ash.” ACI Materials J., 86(2), 111–116.
9.
Naik, T. R., Sivasundaram, V., and Singh, S. S. (1991). “Use of high volume class F fly ash for structural grade concrete.” Transp. Res. Board Conference, Washington, D.C., January 13–17.
10.
Nasser, K. W., and Al‐Manaseer, A. A. (1986). “Shrinkage and creep of concrete containing 50 percent lignite fly ash at different stress‐strength ratios.” Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, Proc. of the Second Int. Conference, American Concrete Institute, I, 433–448.
11.
Papayianni, J. (1986). “Strength and bond data for Greek high‐lime fly ash concrete,” Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, Proc. of the Second Int. Conference, American Concrete Institute, I, 367–386.
12.
Rodway, L. E., and Fedriko, W. M. (1989). “Superplasticized high‐volume fly ash structural concrete.” Third CANMET/ACI Int. Conference on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, Trondheim, Norway, 98–112.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Aug 1, 1991
Published in print: Aug 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.