Feasibility Test of Adaptive Passive Control System Using MR Fluid Damper with Electromagnetic Induction Part
Publication: Journal of Engineering Mechanics
Volume 136, Issue 2
Abstract
This paper experimentally investigates the feasibility of an adaptive passive control system, which consists of a magnetorheological (MR) fluid damper and an electromagnetic induction (EMI) part, for suppressing vibration of building structures subjected to ground accelerations. In the adaptive passive control system, the EMI part composed of a permanent magnet and a coil convert the kinetic energy of the relative motion between a building and a damper into the electric energy, which is used for a change in damping characteristics of the MR fluid damper. Since the EMI part can be used as a controller, which determines the command voltage input according to structural responses as well as a power source, the adaptive passive system can be much more compact, convenient, and economic than a conventional active/semiactive system that needs a power supply, a controller, and sensors. To experimentally verify the feasibility of the adaptive passive control system, a shaking table test of a small-scale building model employing the MR fluid damper with the EMI part is conducted. The performance of the adaptive passive control system is compared with that of passively operated MR fluid damper-based semiactive control systems.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers gratefully acknowledge the support of this research by the Smart Infra-Structure Technology Center (SISTeC) from the Korea Science and Engineering Foundation and the Construction Core Technology Research and Development Project (Grant No. UNSPECIFIEDC105A1000021-05A0300-02110) from Korea Institute of Construction and Transportation Technology Evaluation and Plan (KICTTEP).UNSPECIFIED
References
Cho, S. W., Jung, H. J., and Lee, I. W. (2005). “Smart passive system based on magnetorheological damper.” Smart Mater. Struct., 14, 707–714.
Cho, S. W., Jung, H. J., Lee, J. H., and Lee, I. W. (2004). “Smart passive system based on MR damper.” Proc., JSSI 10th Anniversary Symp. on Performance of Response Controlled Buildings, Japan Society of Seismic Isolation, Yokohama, Japan, 56.
Choi, K. M., Lee, H. J., Cho, S. W., and Lee, I. W. (2007). “Modified energy dissipation algorithm for seismic structures using magnetorheological damper.” KSCE J. Civil. Eng., 11, 121–126.
Dyke, S. J., Spencer, B. F., Jr., Sain, M. K., and Carlson, J. D. (1996). “Modeling and control of magnetorheological dampers for seismic response reduction.” Smart Mater. Struct., 5, 565–575.
Dyke, S. J., Spencer, B. F., Jr., Sain, M. K., and Carlson, J. D. (1998). “An experimental study of MR dampers for seismic protection.” Smart Mater. Struct., 7, 693–703.
El-hami, M., et al. (2001). “Design and fabrication of a new vibration-based electromechanical power generator.” Sens. Actuators, A, 92, 335–342.
Jung, H. J., Choi, K. M., Spencer, B. F., Jr., and Lee, I. W. (2006). “Application of some semi-active control algorithms to a smart base-isolated building employing MR dampers.” Struct. Control Health Monit., 13, 693–704.
Jung, H. J., Park, K. S., Spencer, B. F., Jr., and Lee, I. W. (2004a). “State-of-the-art of semiactive control systems using MR fluid dampers in civil engineering applications.” Struct. Eng. Mech., 17, 493–526.
Jung, H. J., Park, K. S., Spencer, B. F., Jr., and Lee, I. W. (2004b). “Hybrid seismic protection of cable-stayed bridges.” Earthquake Eng. Struct. Dyn., 33, 795–820.
Jung, H. J., Spencer, B. F., Jr., and Lee, I. W. (2003). “Control of seismically excited cable-stayed bridge employing magnetorheological fluid dampers.” J. Struct. Eng., 129, 873–883.
Kamath, G. M., and Wereley, N. M. (1997). “A nonlinear viscoelastic-plastic model for electrorheological fluids.” Smart Mater. Struct., 6, 351–359.
Marshall, S. V., and Skitek, G. G. (1990). Electromagnetic concepts and applications, Prentice-Hall, Englewood Cliffs, N.J.
Miner, G. F. (1996). Lines and electromagnetic fields for engineers, Oxford University Press, Oxford, U.K.
Reitz, J. R., Milford, F. J., and Christy, R. W. (1993). Foundations of electromagnetic theory, Addison-Wesley, Reading, Mass.
Soong, T. T. (1990). Active structural control: Theory and practice, Longman’s, London.
Spelta, C., Savaresi, S., Fraternale, G., and Gaudiano, N. (2008). “Vibration reduction in a washing machine via damping control.” Proc., 17th World Congress of IFAC, International Federation of Automatic Control, Seoul, Korea, 11835–11840.
Spencer, B. F., Jr., Dyke, S. J., Sain, M. K., and Carlson, J. D. (1997). “Phenomenological model of a magnetorheological damper.” J. Eng. Mech., 123, 230–238.
Spencer, B. F., Jr., and Nagarajaiah, S. (2003). “State of the art of structural control.” J. Struct. Eng., 129, 845–856.
Spencer, B. F., Jr., and Sain, M. K. (1997). “Controlling buildings: A new frontier in feedback.” IEEE Control Syst. Mag., 17, 19–35.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Jan 31, 2006
Accepted: Sep 4, 2009
Published online: Jan 15, 2010
Published in print: Feb 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.