Probabilistic Seismic Demand Models and Fragility Estimates for Reinforced Concrete Bridges with Two-Column Bents
Publication: Journal of Engineering Mechanics
Volume 134, Issue 6
Abstract
Probabilistic models are developed to predict the deformation and shear demands due to seismic excitation on reinforced concrete (RC) columns in bridges with two-column bents. A Bayesian methodology is used to develop the models. The models are unbiased and properly account for the predominant uncertainties, including model errors, arising from a potentially inaccurate model form or missing variables, measurement errors, and statistical uncertainty. The probabilistic models developed are akin to deterministic demand models and procedures commonly used in practice, but they have additional correction terms that explicitly describe the inherent systematic and random errors. Through the use of a set of “explanatory” functions, terms that correct the bias in the existing deterministic demand models are identified. These explanatory functions provide insight into the underlying behavioral phenomena and provide a means to select ground motion parameters that are most relevant to the seismic demands. The approach takes into account information gained from scientific/engineering laws, observational data from laboratory experiments, and simulated data from numerical dynamic responses. The demand models are combined with previously developed probabilistic capacity models for RC bridge columns to objectively estimate the seismic vulnerability of bridge components and systems. The vulnerability is expressed in terms of the conditional probability (or fragility) that a demand quantity (deformation or shear) will be greater than or equal to the corresponding capacity. Fragility estimates are developed for an example RC bridge with two-column bents, designed based on the current specifications for California. Fragility estimates are computed at the individual column, bent, and bridge system levels, as a function of the spectral acceleration and the ratio between the peak ground velocity and the peak ground acceleration.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work is partially supported by National Highway Institute under Award No. UNSPECIFIEDDDEGRD-06-X-00457 through a fellowship to the first writer. Opinions and findings presented are those of the writers and do not necessary reflect the views of the National Highway Institute.
References
Applied Technology Council (ATC). (1996). “Improved seismic design criteria for California bridges.” Applied Technology Council Rep. No. ATC-32, Palo Alto, Calif.
Box, G. E. P., and Tiao, G. C. (1992). Baysian inference in statistical analysis, Wiley, New York.
California Department of Transportation (Caltrans). (1999). Seismic design criteria, 1.1 Ed., California Department of Transportation, Sacramento, Calif.
California Department of Transportation (Caltrans). (2006). Seismic design criteria, 1.4 Ed., California Department of Transportation, Sacramento, Calif.
Choe, D. E., Gardoni, P., and Rosowsky, D. (2007). “Closed-form fragility estimates, parameter sensitivity and Bayesian updating for RC columns.” J. Eng. Mech., 133(7), 833–843.
Chopra, A. K., and Goel, R. K. (1999). “Capacity-demand-diagram methods for estimating seismic deformation of inelastic structures: SDF systems.” Rep. No. PEER-1999/02, Pacific Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif.
Fajfar, P. (2000). “A nonlinear analysis method for performance-based seismic design.” Earthquake Spectra, 16(3), 573–592.
Fajfar, P., and Fischinger, M. (1987). “Nonlinear seismic analysis of RC buildings: Implications of a case study.” Eur. Earthquake Eng., 1, 31–43.
Fajfar, P., and Fischinger, M. (1988). “N2—A method for nonlinear seismic analysis of regular buildings.” Proc., 9th World Conf. on Earthquake Engineering, Maruzen, Tokyo, 111–116.
Fajfar, P., Gašperšič, P., and Drobnič, D. (1997). “A simplified nonlinear method for seismic damage analysis of structures.” Seismic design methodologies for the next generation of codes, P. Fajfar and H. Krawinkler, eds. Balkema, Rotterdam, The Netherlands, 183–194.
Federal Emergency Management Agency (FEMA), NEHRP. (1997). “Commentary on the guidelines for the seismic rehabilitation of buildings.” FEMA 274, Washington, D.C.
Gardoni, P., Der Kiureghian, A., and Mosalam, K. M. (2002). “Probabilistic capacity models and fragility estimates for RC columns based on experimental observations.” J. Eng. Mech., 128(10), 1024–1038.
Gardoni, P., Khalid, M. M., and Der Kiureghian, A. (2003). “Probabilistic seismic demand models and fragility estimates for RC bridges.” J. Earthquake Eng., 7(1), 79–106.
Haukaas, T., and Der Kiureghian, A. (2004). “Finite-element reliability and sensitivity methods for performance-based earthquake engineering.” Rep. No. PEER 2003/14, Pacific Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif.
Kunnath, S. K. (2007). “Application of the PEER PBEE methodology to the I-880 viaduct.” Rep. No. PEER 2006/10, Pacific Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif.
McKenna, F., and Fenves, G. L. (2002). “The OpenSees command language primer.” Dept. of Civil and Environmental Engineering, Univ. of California, Berkeley, Calif.
Moore, J. M. (2000). “Shake table testing of two column bent with hinged bases.” Master thesis, Univ. of Nevada, Reno, Nev.
Moustafa, K. (2004). “Impact of aspect ratio on two-column bent seismic performance.” Ph.D. dissertation, Univ. of Nevada, Reno, Nev.
Nada, H. M. (2003). “Seismic performance of RC bridge frames with architectural-flared columns.” Ph.D. dissertation, Univ. of Nevada, Reno, Nev.
Somerville, P., and Collins, N. (2002). “Ground motion time histories for the I880 bridge, Oakland, prepared for the PEER methodology tested project.” URS Corporation, Pasadana, Calif. ⟨http://www.peertestbeds.net/i-880.htm⟩.
Trifunac, M. D., and Brady, A. G. (1975). “On the correlation of seismic intensity with peaks of recorded strong ground motion.” Bull. Seismol. Soc. Am., 65, 139–162.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Mar 6, 2007
Accepted: Aug 17, 2007
Published online: Jun 1, 2008
Published in print: Jun 2008
Notes
Note. Associate Editor: Arvid Naess
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.