Seismic Energy Dissipation of Inelastic Structures with Tuned Mass Dampers
Publication: Journal of Engineering Mechanics
Volume 134, Issue 2
Abstract
The energy transfer process of using a tuned mass damper (TMD) in improving the ability of inelastic structures to dissipate earthquake input energy is investigated. Inelastic structural behavior is modeled by using the force analogy method, which is the backbone of analytically characterizing the plastic energy dissipation in the structure. Numerical simulations are performed to study the energy responses of structures with and without TMD installed. The effectiveness of TMD in reducing energy responses is also studied by using plastic energy spectra for various structural yielding levels. Results show that the use of TMD enhances the ability of the structures to store larger amounts of energy inside the TMD that will be released at a later time in the form of damping energy when the response is not at a critical state, thereby increasing the damping energy dissipation while reducing the plastic energy dissipation. This reduction of plastic energy dissipation relates directly to the reduction of damage in the structure, and TMD is therefore concluded to be quite effective in protecting structures from suffering major damage during an earthquake. However, storing energy in the TMD is restricted if the structure becomes plastic at a small displacement level. In this case, the effectiveness of TMD diminishes, and the structural response becomes practically the same as those without TMD installed.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abdullah, M. M., Hanif, J. H., Richardson, A., and Sobanjo, J. (2001). “Use of a shared tuned mass damper (STMD) to reduce vibration and pounding in adjacent structures.” Earthquake Eng. Struct. Dyn., 30, 1185–1201.
Abe, M., and Fujino, Y. (1994). “Dynamic characterization of multiple tuned mass dampers and some design formulas.” Earthquake Eng. Struct. Dyn., 23(8), 813–835.
Chang, C. C., and Yang, H. T. Y. (1995). “Control of buildings using active tuned mass dampers.” J. Eng. Mech., 121(3), 355–366.
Chang, J. C. H., and Soong, T. T. (1980). “Structural control using active tuned mass dampers.” J. Engrg. Mech. Div., 106(6), 1091–1098.
Chen, G., and Wu, J. (2001). “Optimal placement of multiple tune mass dampers for seismic structures.” J. Struct. Eng., 127(9), 1054–1062.
Hoang, N., and Warnitchai, P. (2005). “Design of multiple tuned mass dampers by using a numerical optimizer.” Earthquake Eng. Struct. Dyn., 34(2), 125–144.
Johnson, J. G., Reaveley, L. D., and Pantelides, C. P. (2003). “A rooftop tuned mass damper frame.” Earthquake Eng. Struct. Dyn., 32(6), 965–984.
Li, C. (2002). “Optimum multiple tuned mass dampers for structures under the ground acceleration based on DDMF and ADMF.” Earthquake Eng. Struct. Dyn., 31(4), 897–919.
Li, C. (2003). “Multiple active-passive tuned mass dampers for structures under the ground acceleration.” Earthquake Eng. Struct. Dyn., 32(6), 949–964.
Li, C., and Liu, Y. (2002). “Active multiple tuned mass dampers for structures under the ground acceleration.” Earthquake Eng. Struct. Dyn., 31(5), 1041–1052.
Li, C., Liu, Y., and Wang, Z. (2003). “Active multiple tuned mass dampers: A new control strategy.” J. Struct. Eng., 129(7), 972–977.
Luft, R. W. (1979). “Optimal tuned mass dampers for buildings.” J. Struct. Div., 105(12), 2766–2772.
Lukkunaprasit, P., and Wanitkorkul, A. (2001). “Inelastic buildings with tuned mass dampers under moderate ground motions from distant earthquakes.” Earthquake Eng. Struct. Dyn., 30(4), 537–551.
McNamara, R. J. (1977). “Tuned mass dampers for buildings.” J. Struct. Div., 103(9), 1785–1798.
Miranda, J. C. (2005). “On tuned mass dampers for reducing the seismic response of structures.” Earthquake Eng. Struct. Dyn., 34(7), 847–865.
Nagarajaiah, S., and Sonmez, E. (2007). “Structures with semi-active variable stiffness single/multiple tuned mass dampers.” J. Struct. Eng., 133(1), 67–77.
Nagarajaiah, S., and Varadarajan, N. (2005). “Short time Fourier transform algorithm for wind response control of buildings with variable stiffness TMD.” Eng. Struct., 27(3), 431–441.
Singh, M. P., Singh, S., and Moreschi, L. M. (2002). “Tuned mass dampers for response control of torsional buildings.” Earthquake Eng. Struct. Dyn., 31(4), 749–769.
Uang, C. M., and Bertero, V. V. (1990). “Evaluation of seismic energy in structures.” Earthquake Eng. Struct. Dyn., 19(1), 77–90.
Varadarajan, N., and Nagarajaiah, S. (2004). “Wind response control of building with variable stiffness tuned mass damper using empirical mode decomposition/Hilbert transform.” J. Eng. Mech., 130(4), 451–458.
Wong, K. K. F., and Chee, Y. L. (2004). “Energy dissipation of tuned mass dampers during earthquake excitations.” The Structural Design of Tall and Special Buildings, 13(2), 105–121.
Wong, K. K. F., and Yang, R. (1999). “Inelastic dynamic response of structures using force analogy method.” J. Eng. Mech., 125(10), 1190–1199.
Xu, K., and Igusa, T. (1992). “Dynamic characteristics of multiple tuned mass substructures with closely spaced frequencies.” Earthquake Eng. Struct. Dyn., 21(12), 1059–1070.
Yamaguchi, H., and Harnpornchai, N. (1993). “Fundamental characteristics of multiple tuned mass dampers for suppressing harmonically forced oscillations.” Earthquake Eng. Struct. Dyn., 22(1), 51–62.
Yan, N., Wang, C. M., and Balendra, T. (1999). “Optimal damper characteristics of ATMD for buildings under wind loads.” J. Struct. Eng., 125(12), 1376–1383.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Dec 1, 2005
Accepted: Jul 26, 2007
Published online: Feb 1, 2008
Published in print: Feb 2008
Notes
Note. Associate Editor: Lambros S. Katafygiotis
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.