Application of Centralized and Decentralized Control to Building Structure: Analytical Study
Publication: Journal of Engineering Mechanics
Volume 134, Issue 11
Abstract
This paper presents both the centralized and decentralized control strategies by using semiactive control devices (magnetorheological dampers) for building structural control under seismic excitations. The control algorithms used in this study only focus on the linear quadratic Gaussian control theory with acceleration measurements as feedback signals. In the centralized control, the control force is generated directly from the measurement in each degree of freedom, while in the decentralized control, only measurement from local subsystems is used to calculate the control force with respect to the locations of control devices and measurements. Four groups of centralized/decentralized control algorithms are studied: fully centralized control, fully decentralized control, half-centralized control, and partially decentralized control. The ASCE 20-story benchmark building is selected as an example to evaluate the control performance among different control strategies.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers wish to express their thanks to the National Science Council of Taiwan for the support of this research under Grant No. NSCTNSC 96-2211-E-002-121-MY3.
References
Brandow and Johnston Associates. (1996). Consulting Structural Engineers, Los Angeles, Calif.
Dyke, S. J., Spencer, B. F., Quast, P., Sain, M. K., Kaspaari, D. C., and Soong, T. T. (1996a). “Acceleration feedback control of MDOF structures.” J. Eng. Mech., 122(9), 907–918.
Dyke, S. J., Spencer, B. F., Sain, M. K., and Carlson, J. D. (1996b). “Modeling and control of magnetorheological dampers for seismic response reduction.” Smart Mater. Struct., 5, 565–575.
Ghaboussi, J., and Joghataie, A. (1995). “Active control of structures using neural network.” J. Eng. Mech., 121(4), 555–567.
Kim, S. B., and Yun, C. B. (2000). “Sliding mode fuzzy control: Theory and verification on a benchmark structure.” Earthquake Eng. Struct. Dyn., 29, 1587–1608.
Kurata, N., Kobori, T., Takahashi, M., Niwa, N., and Midorikawa, H. (1999). “Actual seismic response controlled building with semi-active damper system.” Earthquake Eng. Struct. Dyn., 28, 1427–1447.
Limebeer, D. J. N., and Anderson, B. D. O. (1994). “A Nash game approach to mixed control.” IEEE Trans. Autom. Control, 39, 69–82.
Lin, P. Y., Chung, L. L., Loh, C. H., Cheng, C. P., Roschke, P. N., and Chang, C. C. (2002). “Experimental study of seismic protection for structures using MR dampers.” Proc., 12th European Conf. on Earthquake Engineering, London, Paper No. 249.
Lin, P. Y., Roschke, P. N., Loh, C. H., and Cheng, C. P. (2004). “Semi-active controlled based-isolation system with MR dampers and pendulum system.” Proc., 13WCEE, Vancouver, Paper No. 691.
Loh, C. H., and Chang, C. M. (2006). “Vibration control assessment of ASCE benchmark model of cable-stayed bridge.” Struct. Control Health Monit., 13(4), 825–848.
Lynch, J. P., and Law, K. H. (2002). “Decentralized control techniques for large-scale civil structural systems.” Proc., 20th Int. Modal Analysis Conf., Los Angeles, Calif.
Ohtori, Y., Christenson, R. E., Spencer, B. F., and Dyke, S. J. (2004). “Benchmark control problem for seismically excited nonlinear buildings.” J. Eng. Mech., 130(4), 366–385.
Renzi, B., and Serino, G. (2004). “Testing and modeling a semi-actively controlled steel frame structure equipped with MR dampers.” Struct. Control Health Monit., 11(3), 189–221.
Spencer, B. F., Dyke, S. J., Sain, M. K., and Carlson, J. D. (1997). “Phenomenological model for magnetorheological dampers.” J. Eng. Mech., 123(3), 230–238.
Xu, B., Wu, Z. S., and Yokoyama, K. (2003). “Neural network for decentralized control of cable-stayed bridge.” J. Bridge Eng., 8(4), 229–236.
Yang, G., Spencer, B. F., Carlson, J. D., and Sain, M. K. (2002). “Large-scale MR fluid dampers: Modeling and dynamic performance consideration.” Eng. Struct., 24, 309–323.
Yang, J. N., Akbarpour, A., and Ghaemmaghami, P. (1987). “New optimal control algorithms for structural control.” J. Eng. Mech., 113(9), 1369–1386.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: May 18, 2006
Accepted: Apr 15, 2008
Published online: Nov 1, 2008
Published in print: Nov 2008
Notes
Note. Associate Editor: Lambros S. Katafygiotis
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.