Virtual Internal Pair-Bond Model for Quasi-Brittle Materials
Publication: Journal of Engineering Mechanics
Volume 134, Issue 10
Abstract
The present multiscale investigation employs the initial and total fracture energy through a virtual internal pair-bond (VIPB) model. The proposed VIPB model is an extension of the traditional virtual internal bond (VIB) model. Two different types of potentials, a steep short-range potential and a shallow long-range potential, are employed to describe the initial and the total fracture energies, respectively. The Morse potential function is modified for the virtual bond potential so that it is independent of specific length scales associated with the lattice geometry. This feature is incorporated in the VIPB model, which uses both fracture energies and cohesive strength. With respect to the discretization by finite elements, we address the element size dependence in conjunction with the integral. Parameters in the VIPB model are evaluated by numerical simulations of a pure tension test in conjunction with measured fracture parameters. We also validate the VIPB model by predicting load versus crack mouth opening displacement curves for geometrically similar specimens, and the measured size effect. Finally, we provide an example involving fiber-reinforced concrete, which demonstrates the advantage of the VIPB model over the usual VIB model.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers would like to acknowledge support from the National Science Foundation (NSF) through Grant NSFCMMI 0800805. The writers also acknowledge support from the Center of Excellence for Airport Technology (CEAT), funded by the Federal Aviation Administration (FAA) under Research Grant Number UNSPECIFIED95-C-001 and the Univ. of Illinois. The writers appreciate the useful comments of Dr. David R. Brill to this work. The information presented in this paper is the sole opinion of the writers and does not necessarily reflect the views of the sponsors.
References
Anderson, T. L. (1995) Fracture mechanics: Fundamentals and applications, CRC, Boca Raton, Fla.
Barenblatt, G. I. (1959). “The formation of equilibrium cracks during brittle fracture: General ideas and hypotheses, axially symmetric cracks.” J. Appl. Math. Mech., 23(3), 622–636.
Bazant, Z. P. (1999). “Size effect on structural strength: A review.” Arch. Appl. Mech., 69(9–10), 703–725.
Bazant, Z. P. (2000). “Size effect.” Int. J. Solids Struct., 37(1–2), 69–80.
Bazant, Z. P., and Becq-Giraudon, E. (2002). “Statistical prediction of fracture parameters of concrete and implications for choice of testing standard.” Cem. Concr. Res., 32(4), 529–556.
Bazant, Z. P., and Kazemi, M. T. (1990). “Determination of fracture energy, process zone length and brittleness number from size effect, with application to rock and concrete.” Int. J. Fract., 44(2), 111–131.
Bazant, Z. P., and Planas, J. (1998). Fracture and size effect in concrete and other quasi-brittle materials, CRC, Boca Raton.
Belytschko, T., Liu, W. K., and Moran, B. (2000). Nonlinear finite elements for continua and structures, Wiley, New York.
Born, M. (1940). “On the stability of crystal lattices. I.” Proc. Cambridge Philos. Soc., 36, 160–172.
Dugdale, D. S. (1960). “Yielding of steel sheets containing slits.” J. Mech. Phys. Solids, 8(2), 100–104.
Gao, H., and Ji, B. (2003). “Modeling fracture in nanomaterials via a virtual internal bond method.” Eng. Fract. Mech., 70(14), 1777–1791.
Gao, H., and Klein, P. (1998). “Numerical simulation of crack growth in an isotropic solid with randomized internal cohesive bonds.” J. Mech. Phys. Solids, 46(2), 187–218.
Girifalco, L. A., and Weizer, V. G. (1959). “Application of the Morse potential function to cubic metals.” Phys. Rev., 114(3), 687–690.
Hillerborg, A. (1985). “The theoretical basis of a method to determine the fracture energy of concrete.” Mater. Struct., 18(4), 291–296.
Hillerborg, A., Modeer, M., and Petersson, P. E. (1976). “Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements.” Cem. Concr. Res., 6(6), 773–781.
Jenq, Y. S., and Shah, S. P. (1985). “Two parameter fracture model for concrete.” J. Eng. Mech., 111(10), 1227–1241.
Klein, P., and Gao, H. (1998). “Crack nucleation and growth as strain localization on a virtual-bond continuum.” Eng. Fract. Mech., 61(1), 21–48.
Klein, P. A., Foulk, J. W., Chen, E. P., Wimmer, S. A., and Gao, H. (2001). “Physics-based modeling of brittle fracture: Cohesive formulations and the application of meshfree methods.” Theor. Appl. Fract. Mech., 37(1–3), 99–166.
Milstein, F. (1973). “Applicability of exponentially attractive and repulsive interatomic potential functions in the description of cubic crystals.” J. Appl. Phys., 44(9), 3825–3832.
Morse, P. M. (1929). “Diatomic molecules according to the wave mechanics. II: Vibrational levels.” Phys. Rev., 34(1), 57–64.
Nguyen, T. D., Govindjee, S., Klein, P. A., and Gao, H. (2004). “A rate-dependent cohesive continuum model for the study of crack dynamics.” Comput. Methods Appl. Mech. Eng., 193(30–32), 3239–3265.
Pandolfi, A., and Ortiz, M. (2002). “An efficient adaptive procedure for three-dimensional fragmentation simulations.” Eng. Comput., 18(2), 148–159.
Park, K. (2005). “Concrete fracture mechanics and size effect using a specialized cohesive zone model.” Master’s thesis, Univ. of Illinois at Urbana-Champaign, Urbana, Ill.
Park, K., Paulino, G. H., and Roesler, J. R. (2008). “Determination of the kink point in the bilinear softening model for concrete.” Eng. Fract. Mech., 75(13), 3806–3818.
Paulino, G. H., Song, S. H., and Buttlar, W. G. (2004). “Cohesive zone modeling of fracture in asphalt concrete.” Proc., 5th RILEM Int. Conf. on Cracking in Pavements: Mitigation, Risk Assessment and Prevention.
Rice, J. R. (1968). “A path independent integral and the approximate analysis of strain concentration by notches and cracks.” ASME J. Appl. Mech., 35(2), 379–386.
Roesler, J. R., Paulino, G. H., Gaedicke, C., Bordelon, A., and Park, K. (2007b). “Fracture behavior of functionally graded concrete materials (FGCM) for rigid pavements.” Transportation Research Record. 2037, Transportation Research Board, Washington, D.C., 40–49.
Roesler, J. R., Paulino, G. H., Park, K., and Gaedicke, C. (2007a). “Concrete fracture prediction using bilinear softening.” Cem. Concr. Compos., 29(4), 300–312.
Rose, J. H., Ferrante, J., and Smith, J. R. (1981). “Universal binding energy curves for metals and bimetallic interfaces.” Phys. Rev. Lett., 47(9), 675–678.
Shah, S. P., Swartz, S. E., and Ouyang, C. (1995). Fracture mechanics of concrete, Wiley, New York.
Song, S. H., Paulino, G. H., and Buttlar, W. G. (2006a). “A bilinear cohesive zone model tailored for fracture of asphalt concrete considering viscoelastic bulk material.” Eng. Fract. Mech., 73(18), 2829–2848.
Song, S. H., Paulino, G. H., and Buttlar, W. G. (2006b). “Simulation of crack propagation in asphalt concrete using a cohesive zone model.” J. Eng. Mech., 132(11), 1215–1223.
Tadmor, E. B., Ortiz, M., and Phillips, R. (1996). “Quasicontinuum analysis of defects in solids.” Philos. Mag. A, 73(6), 1529–1563.
Thiagarajan, G., Hsia, K. J., and Huang, Y. (2004). “Finite-element implementation of virtual internal bond model for simulating crack behavior.” Eng. Fract. Mech., 71(3), 401–423.
Van Mier, J. G. M. (1996) Fracture processes of concrete: Assessment of material parameters for fracture models, CRC, Boca Raton, Fla.
Xu, X. P., and Needleman, A. (1994). “Numerical simulation of fast crack growth in brittle solids.” J. Mech. Phys. Solids, 42(9), 1397–1434.
Zhang, P., Klein, P., Huang, Y., Gao, H., and Wu, P. D. (2002). “Numerical simulation of cohesive fracture by the virtual-internal-bond model.” CMES—Comput. Model. Eng. Sci., 3(2), 263–277.
Zhang, Z., and Paulino, G. H. (2005). “Cohesive zone modeling of dynamic failure in homogeneous and functionally graded materials.” Int. J. Plast., 21(6), 1195–1254.
Zhang, Z., Paulino, G. H., and Celes, W. (2007). “Extrinsic cohesive modeling of dynamic fracture and microbranching instability in brittle materials.” Int. J. Numer. Methods Eng., 72(8), 893–923.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Jan 10, 2007
Accepted: Feb 21, 2008
Published online: Oct 1, 2008
Published in print: Oct 2008
Notes
Note. Associate Editor: Jiun-Shyan Chen
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.