Temperature Prediction of Concrete-Filled Rectangular Hollow Sections in Fire Using Green’s Function Method
Publication: Journal of Engineering Mechanics
Volume 133, Issue 6
Abstract
An efficient numerical approach using the Green’s function solutions of transient heat conduction for predictions of thermal response inside a concrete-filled rectangular hollow section subjected to fire is proposed in this paper. Thermal properties of construction materials are assumed to be isotropic and homogeneous. The Green’s function approach adopts different series expansions for small and large time solutions, therefore the desirable convergence properties can be achieved at any range of time by using the time partitioning strategy. A useful analytical relation in terms of step Green’s functions is derived in this paper to incorporate the multidimensional effect, in particular, for Neumann (prescribed flux) boundary conditions. A modified lumped capacitance method, together with an “orthogonal flux” concept, are employed to deal with spatially varying heat flux at the steel–concrete interface, where Duhamel’s theorem is applied in piecewise manner along the interface to incorporate the fire boundary conditions. No spatial discretization is required in the numerical algorithms based on the Green’s function approach.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers would like to thank Nanyang Technological University (NTU) and the Ministry of Education (MOE) of Singapore for supporting this work. This work was funded under Grant Nos. ARC 5/03 and RGM 28/03.
References
American Society of Civil Engineers/Society of Fire Protection Engineers (ASCE/SEI/SFPE 29-99). (2003). “Standard calculation methods for structural fire protection.” ASCE/SEI/SFPE 29-99.
Beck, J. V., Cole, K. D., Haji-Sheikh, A., and Litkouhi, B. (1992). Heat conduction using Green’s functions, Hemisphere, New York.
Carslaw, H. S., and Jaeger, J. C. (1959). Conduction of heat in solids, 2nd Ed., Oxford University Press, New York.
Comite Europeen de Normalisation (CEN). (2003a). “Eurocode 3—Design of steel structures—Part 1-2: General rules—Structural fire design, Stage 49 draft.” prEN 1993-1-2, Brussels, Belgium.
Comite Europeen de Normalisation (CEN). (2003b). “Eurocode 4—Design of composite steel and concrete structures—Part 1-2: Structural rules—Structural fire design, final draft.” prEN 1994-1-2, Brussels, Belgium.
Courant, R., and Hilbert, D. (1989). Methods of mathematical physics. Partial differential equations, Wiley, New York, Vol. II.
de Monte, F. (2003). “Unsteady heat conduction in two-dimensional two slab-shaped regions. Exact closed-form solution and results.” Int. J. Heat Mass Transfer, 46, 1455–1469.
Haji-Sheikh, A., and Beck, J. V. (2002). “Temperature solution in multidimensional multilayered bodies.”Int. J. Heat Mass Transfer, 45, 1865–1877.
Huang, H. C., and Usmani, A. S. (1994). Finite element analysis for heat transfer, Springer, Berlin.
ISO. (1975). “Fire resistance tests—Elements of building construction.” ISO 834, Geneva, Switzerland.
Kumar, I. J. (1972). “Recent mathematical methods in heat transfer.” Adv. Heat Transfer, 8, 1–91.
Lie, T. T., ed. (1992). Structural fire protection, ASCE.
Melinek, S. J., and Thomas, P. H. (1987). “Heat flow to insulated steel.” Fire Saf. J., 12, 1–8.
Mikhailov, M. D., and Ozisik, M. N. (1986). “Transient conduction in a three-dimensional composite slab.” Int. J. Heat Mass Transfer, 29(2), 340–342.
Ozisik, M. N. (1993). Heat conduction, 2nd Ed., Wiley, New York.
Sterner, E., and Wickstrom, U. (1990). “TASEF—Temperature analysis of structures exposed to fire—User’s manual.” SP Rep. No. 1990:05, Swedish National Testing and Research Institute, Boras, Sweden.
Wang, Y. C. (2002). Steel and composite structures: Behaviour and design for fire safety, E & FN Spon, London.
Wang, Z.-H., Au, S. K., and Tan, K. H. (2005). “Heat transfer analysis using a Green’s function approach for uniformly insulated steel members subjected to fire.” Eng. Struct., 27(10), 1551–1562.
Wang, Z.-H., and Tan, K. H. (2006a). “Green’s function solution for transient heat conduction in concrete-filled steel CHS subjected to fire.” Eng. Struct., 28(11), 1574–1585.
Wang, Z.-H., and Tan, K. H. (2006b). “Sensitivity study of time delay coefficient of heat transfer formulations for insulated steel members exposed to fire.” Fire Saf. J., 41(1), 31–38.
Wang, Z.-H., and Tan, K. H. (2006c). “Temperature prediction for contour-insulated concrete-filled CHS subjected to fire using large time Green’s function solutions.” J. Constr. Steel Res., in press.
Wang, Z.-H., and Tan, K. H. (2006d). “Temperature prediction for multidimensional domains in standard fire.” Commun. Numer. Methods Eng., in press.
Wickstrom, U. (1985). “Temperature analysis of heavily-insulated steel structures exposed to fire.” Fire Saf. J., 9, 281–285.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Feb 27, 2006
Accepted: Oct 27, 2006
Published online: Jun 1, 2007
Published in print: Jun 2007
Notes
Note. Associate Editor: Yunping Xi
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.