Approximate Reliability-Based Optimization Using a Three-Step Approach Based on Subset Simulation
Publication: Journal of Engineering Mechanics
Volume 133, Issue 4
Abstract
A novel three-step approach is proposed to solve reliability-based optimization (RBO) problems. The new approach is based on a novel approach previously developed by the authors for estimating failure probability functions. The major advantage of the new approach is that it is applicable to RBO problems with high-dimensional uncertainties and with arbitrary system complexities. The basic idea is to transform the reliability constraint in the target RBO problem into nonprobabilistic one by first estimating the failure probability function and the confidence intervals using minimal amount of computation, in fact, using just a single subset simulation (SubSim) run for each reliability constraint. Samples of the failure probability function are then drawn from the confidence intervals. In the second step, candidate solutions of the RBO problems are found based on the samples, and in the third step, the final design solution is screened out of the candidates to ensure that the failure probability of the final design meets the target, which also only costs a single SubSim run. Four numerical examples are investigated to verify the proposed novel approach. The results show that the approach is capable of finding approximate solutions that are usually close to the actual solution of the target RBO problem.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ang, A., Frangopol, D., Ciampoli, M., Das, P., and Kanda, J. (1998). “Life-cycle cost evaluation and target reliability for design.” Structural safety and reliability, N. Shiraishi, M. Shinozuka, and Y. K. Wen, eds., 1, Balkema, Rotterdam, The Netherlands, 77–78.
Au, S. K. (2004). “Probabilistic failure analysis by importance sampling Markov chain simulation.” J. Eng. Mech., 130(3), 303–311.
Au, S. K. (2005). “Reliability-based design sensitivity by efficient simulation.” Comput. Struct., 83(14), 1048–1061.
Au, S. K., and Beck, J. L. (2001). “Estimation of small failure probability in high dimensions by subset simulation.” Probab. Eng. Mech., 16(4), 263–277.
Chang, S. E., and Shinozuka, M. (1996). “Life-cycle cost analysis with natural hazard risk.” J. Infrastruct. Syst., 2(3), 118–126.
Ching, J., Au, S. K., and Beck, J. L. (2005a). “Reliability estimation for dynamic systems subject to stochastic excitations using Subset Simulation with splitting.” Comput. Methods Appl. Mech. Eng., 194(14), 1557–1579.
Ching, J., Beck, J. L., and Au, S. K. (2005b). “Hybrid subset simulation method for reliability estimation of dynamic systems subject to stochastic excitations.” Probab. Eng. Mech., 20(3), 199–214.
Ching, J., and Hsieh, Y. H. (2006). “Local estimation of failure probability function and its confidence interval with maximum entropy principle.” Probab. Eng. Mech., 22(1), 39–49.
Eldred, M. S., Giunta, A. A., Wojtkiewicz, S. F., and Trucano, T. G. (2002). “Formulations for surrogate-based optimization under uncertainty.” Proc., 9th AIAA/ISSMO Symp. on Multidisciplinary Analysis and Optimization, Atlanta, Georgia, Paper AIAA–2002–5585.
Enevoldsen, I., and Sorensen, J. D. (1994). “Reliability-based optimization in structural engineering.” Struct. Safety, 15(3), 169–196.
Gasser, M., and Schueller, G. I. (1997). “Reliability-based optimization of structural systems.” Math. Methods Oper. Res., 46(3), 287–307.
Igusa, T., and Wan, Z. (2003). “Response surface methods for optimization under uncertainty.” Proc., 9th Int. Conf. on Application of Statistics and Probability, A. Der Kiureghian, S. Madanat, and J. Pestana, eds., San Francisco.
Jaynes, E. T. (1957). “Information theory and statistical mechanics.” Phys. Rev., 106(4), 620–630.
Jensen, H. A. (2005). “Structural optimization of linear dynamical systems understochastic excitation: A moving reliability database approach.” Comput. Methods Appl. Mech. Eng., 194(16), 1757–1778.
Kong, J. S., and Frangopol, D. M. (2002). “Life-cycle performance prediction of steel/concrete composite bridges.” Int. J. Steel Struct., 2(1), 13–19.
Mori, Y., and Ellingwood, B. E. (1993). “Reliability-based service-life assessment of aging concrete structures.” J. Struct. Eng., 119(5), 1600–1621.
Ormoneit, D., and White, H. (1999). “An efficient algorithm to compute maximum entropy densities.” Econometric Reviews, 18(2), 127–140.
Papadrakakis, M., and Lagaros, N. D. (2002). “Reliability-based structural optimization using neural networks and Monte Carlo simulation.” Comput. Methods Appl. Mech. Eng., 191(32), 3491–3507.
Poland, C. D. (1995). “A comprehensive approach towards the development of a performance-based seismic source document.” Restructuring America and Beyond, Proc., Struct. Congress XIII, Vol. 1, ASCE, New York, 443–446.
Priestley, M. J. N. (2000). “Performance based seismic design.” Proc., 12th World Conf. on Earthquake Engineering (CD-ROM), Paper No. 2831, Aukland, New Zealand.
Royset, J. O., Kiureghian, A. D., and Polak, E. (2001). “Reliability-based optimal design of series structural systems.” J. Eng. Mech., 127(6), 607–614.
Schuëller, G. I., et al. (2005). “Benchmark study on reliability estimation in higher dimensions of structural systems: An overview.” Structural Dynamics EURODYN 2005—Proc., 6th Int. Conf. on Structural Dynamics, Millpress, Rotterdam, The Netherlands, 717–722.
Spencer, B. F., Sain, M. K., Won, C.-H., Kaspari, D. C., and Sain, P. M. (1994). “Reliability-based measures of structural control robustness.” Struct. Safety, 15(2), 111–129.
Tsompanakis, Y., and Papadrakakis, M. (2004). “Large-scale reliability-based structural optimization.” Struct. Multidiscip. Optim., 26(6), 429–440.
Youn, B. D., Choi, K. K., Yang, R. J., and Gu, L. (2004). “Reliability-based design optimization for crashworthiness of vehicle side impact.” Struct. Multidiscip. Optim., 26(3-4), 272–283.
Yuen, K.-V., and Beck, J. L. (2003). “Reliability-based robust control for structures using feedback of incomplete noisy measurements.” Earthquake Eng. Struct. Dyn., 32(5), 751–770.
Zellner, A., and Highfield, R. A. (1988). “Calculation of maximum entropy distributions and approximation of marginal posterior distributions.” J. Econometr., 37(2), 195–209.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Aug 19, 2005
Accepted: Aug 9, 2006
Published online: Apr 1, 2007
Published in print: Apr 2007
Notes
Note. Associate Editor: Arvid Naess
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.