Electroelastic Response of a Laminated Composite Plate with Piezoelectric Sensors and Actuators
Publication: Journal of Engineering Mechanics
Volume 132, Issue 8
Abstract
The paper deals with the fully coupled response characteristics of a multilayered composite plate with piezoelectric layers. The response quantities of the plate are coupled by the mechanical field and the electric field. Based on the three-dimensional linear piezoelectricity and the first-order shear deformation theory, the fundamental unknowns, such as the displacements and the electric potential, are assumed to be expandable through the plate thickness coordinate. The governing equations of motion of the plate are presented in terms of the unknown displacement and electrical potential coefficients. When the boundary conditions and electromechanical inputs are specified, the double Fourier series is used to obtain the response of the simply supported multilayered plates. Numerical results for the static and dynamic response of the laminated composite plates with different lamination schemes and having a PIC-151 piezoelectric material layer are obtained. The effects of the plate thinness ratio, plate aspect ratio, lamination scheme, fiber orientations, and piezoelectric coupling on the static and dynamic response are presented.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers gratefully acknowledge the financial support by the National Science Council of Taiwan, Republic of China (Contract Nos. NSC 94-2212-E-035-013 and 93-2212-E-035-019).
References
Abramovich, H., and Livshits, A. (1993). “Dynamic behavior of cross-ply laminated beams with piezoelectric layers.” Compos. Struct., 25(4), 371–379.
Batra, R. C., and Liang, X. Q. (1997). “Vibration of a rectangular laminated elastic plate with embedded piezoelectric sensors and actuators.” Compos. Struct., 63(2), 203–216.
Bhattacharya, P., Suhail, H., and Sinha, P. K. (1998). “Finite element free vibration analysis of smart laminated composite beams and plates.” J. Intell. Mater. Syst. Struct., 9(1), 20–28.
Brooks, S., and Heylinger, P. (1994). “Static behavior of piezoelectric laminates with distributed and patched actuators.” J. Intell. Mater. Syst. Struct., 5, 635–646.
Bruant, I., Coffignal, G., Lene, F., and Verge, M. (2001). “A methodology for determination of piezoelectric actuator and sensor location on beam structures.” J. Sound Vib., 243(5), 861–882.
Creath, K., and Gudmunn, A. (1985). “Vibration-observation techniques for digital speckle-pattern interferometry.” J. Opt. Soc. Am. A, 2(10), 1629–1636.
Ha, S. K., Keilers, C., and Chang, F. K. (1992). “Finite element analysis of composite structures containing distributed piezoceramic sensors and actuators.” AIAA J., 30(3), 772–780.
Huang, C. H., and Ma, C. C. (1998). “Vibration characteristics for piezoelectric cylinders using amplitude-fluctuation electronic speckle pattern interferometry.” AIAA J., 36(12), 2262–2268.
Huang, J. H. (1996). “Micromechanics determinations of thermoelectroelastic fields and effective thermoelectroelastic moduli of piezoelectric composites.” Mater. Sci. Eng., B, 39, 163–172.
Huang, J. H., and Kuo, W. S. (1996). “Micromechanics determination ofthe effective properties of piezoelectric composites containing spatially oriented shorted fibers.” Acta Metall., 44(12), 4889–4898.
Huang, J. H., and Wu, T. L. (1995). “Analysis of hybrid mutilayerd piezoelectric plates.” Int. J. Eng. Sci., 34(2), 171–181.
Jones, R., and Wykes, C. (1989). Holographic and speckle interferometry, Cambridge University Press, Cambridge, U.K.
Jonnalaggada, K. D., Blandford, G. E., and Tauchert, T. R. (1994). “Piezothermoelastic composite plate analysis using first-order shear deformation theory.” Compos. Struct., 51, 79–89.
Koyuncu, B. (1980). “Investigation of high-frequency vibration modes of PZT-4 transducers using ESPI techniques with reference beam modulation.” Opt. Lasers Eng., 1(1), 37–49.
Kuo, W. S., and Huang, J. H. (1997). “Stability and vibration by initially stressed plates composed of spatially distributed fiber composites.” J. Sound Vib., 19(1), 51–69.
Lin, H. Y., Huang, J. H., and Ma, C. C. (2002). “Vibration characterization of piezoelectric materials by optical methods.” IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 49(8), 1139–1149.
Loja, M. A. R., Barbosa, J. I., Mota Soares, C. M., and Mota Soares, C. A. (2001). “Analysis of piezolaminated plates by the spline finite strip method.” Compos. Struct., 79(26–28), 2321–2333.
Ma, C. C., and Huang, C. H. (2001). “The investigation of three-dimensional vibration for piezoelectric rectangular parallelepipeds using the AF-ESPI method.” IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 48(1), 142–153.
Nakadate, S. (1986). “Vibration measurement using phase-shifting speckle pattern interferometry.” Appl. Opt., 25(22), 4162–4167.
Weng, G. J. (1992). “Explicit evaluation of Willis’ bounds with ellipsoidal inclusions.” Int. J. Eng. Sci., 30, 83–92.
Wykes, C. (1982). “Use of electronic speckle pattern interferometry (ESPI) in the measurement of static and dynamic surface displacements.” Opt. Lasers Eng., 21(3), 400–406.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Feb 15, 2005
Accepted: Nov 14, 2005
Published online: Aug 1, 2006
Published in print: Aug 2006
Notes
Note. Associate Editor: Raimondo Betti
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.