Dynamic Response of Closed-Loop System with Uncertain Parameters Using Interval Finite-Element Method
Publication: Journal of Engineering Mechanics
Volume 132, Issue 8
Abstract
Using the interval finite-element method, the vibration control problem of structures with interval parameters is discussed, which is approximated by a deterministic one. Based on the first-order Taylor expansion, a method to solve the interval dynamic response of the closed-loop system is presented. The expressions of the interval stiffness and interval mass matrix are developed directly with the interval parameters. With matrix perturbation and interval extension theory, the algorithm for estimating the upper and lower bounds of dynamic responses is developed. The results are derived in terms of eigenvalues and left and right eigenvectors of the second-order systems. The present method is applied to a vibration system to illustrate the application. The effect of the different levels of uncertainties of interval parameters on responses is discussed. The comparison of the present method with the classical random perturbation is given, and the numerical results show that the present method is valid when the parameter uncertainties are small compared with the corresponding mean values.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This project was supported by National Natural Foundation of China (Grant No. 10202006), and “985” Engineering for Automobile Technology Innovation of Jilin University.
References
Alefeld, G., and Herzberber, J. (1983). Introductions to interval computations, Academic Press, New York.
Ben-Haim, Y., and Elishakoff, I. (1990). Convex models of uncertainty in applied mechanics, Elsevier, New York.
Chen, S. H. (1992). Vibration theory of structural systems with random parameters, Jilin Science and Technology Publishing House, (in Chinese).
Chen, S. H. (1999). Matrix perturbation theory in structural dynamic designs, Science Press, Beijing (in Chinese).
Chen, Y. D., Chen, S. H., and Liu, Z. S. (2001a) “Modal optimal control procedure for near defective systems.” J. Sound Vib., 245, 113–132.
Chen, Y. D., Chen, S. H., and Liu, Z. S. (2001b) “Quantitative measures of modal controllability and observability for the defective and near defective systems.” J. Sound Vib., 248, 413–426.
Chen, S. H., Lian, H. D., and Yang, X. W. (2002). “Dynamic response analysis for structures with interval parameters.” Struct. Eng. Mech., 13(3), 299–312.
Chen, S. H., Lian, H. D., and Yang, X. W. (2003). “Interval eigenvalue analysis for structures with interval parameters.” Finite Elem. Anal. Design, 39(5–6), 419–431.
Chen, S. H., Liu, Z. S., and Zhang, Z. F. (1992). “Random vibration analysis for large-scale structures with random parameters.” Comput. Struct., 43, 681–685.
Chen, S. H., and Qiu, Z. P. (1994a). “A new method for computing the upper and lower bounds on frequencies of structures with interval parameters.” Mech. Res. Commun., 2, 583–592.
Chen, S. H., and Qiu, Z. P. (1994b). “Perturbation method for computing eigenvalue bounds in vibration system with interval parameters.” Commun. Numer. Methods Eng., 10, 121–134.
Chen, S. H., and Yang, X. W. (2000). “Interval finite element method of the beam structures.” Finite Elem. Anal. Design, 34, 75–88.
Contracts, H. (1980). “The stochastical finite element method.” Comput. Struct., 12, 341–348.
Dief, A. S. (1986). Sensitivity analysis in linear systems, Springer, Berlin.
Ferrara, A., and Giacomini, L. (2000). “Control of a class of mechanical systems with uncertainties via a constructive adaptive/second order VSC approach.” J. Dyn. Syst., Meas., Control, 122(1), 33–39.
Ganzerli, S., and Pantelides, C. P. (1999). “Load and resistance convex models for optimum design.” Struct. Optim., 17(4), 259–268.
Ganzerli, S., and Pantelides, C. P. (2000). “Optimum structural design via convex model superposition.” Comput. Struct., 74(6), 639–647.
Juang, Y. T., Kuo, T. S., and Hsu, C. F. (1987). “Root-locus approach to the stability analysis of interval matrices.” Int. J. Control, 46, 817–822.
Krodkiewski, J. M. (2000). “Stabilization of motion of helicopter rotor blades using delayed feedback-modeling.” J. Sound Vib., 234, 591–610.
Larson, H. J. (1979). Probabilistic models in engineering science, Wiley, New York, Vols. 1 and 2.
Li, Y. Y., and Yarn, L. H. (2001). “Robust vibration control of uncertain systems using variable parameter feedback and model-based fuzzy strategies.” Comput. Struct., 79(1), 109–119.
Lin, Y. K. (1967). Probabilistic theory of structural dynamic, McGraw-Hill, New York.
Lindberg, H. E. (1991). “Dynamic response and buckling failure measures for structures with bounded and random imperfections.” Trans. ASME, J. Appl. Mech., 58, 1092–1094.
Liu, Z. S., Chen, S. H., and Han, W. Z. (1994). “Solving the extremum of static response for structural systems with uncertain unknown-but-bound parameters.” Comput. Struct., 50(4), 557–561.
Meirovitch, L. (1990). Dynamics and control, Wiley, New York.
Moore, R. E. (1979). “Methods and applications of interval analysis.” SIAM Studies in Applied Mathematics, SIAM, Philadelphia.
Mori, T., and Kokame, H. (1987). “Convergence property of interval matrices and interval polynomials.” Int. J. Control, 45, 481–484.
Pantelides, C. P., and Booth, B. C. (2000). “Computer-aided design of optimal structures with uncertainty.” Comput. Struct., 74(3), 293–307.
Pantelides, C. P., and Ganzerli, S. (1998). “Design of trusses under uncertain loads using convex models.” J. Struct. Eng., 124(3), 318–329.
Porter, B., and Crossley, R. (1972). Modal control theory and applications, Taylor & Francis, London.
Rachid, A. (1989). “Robustness of discrete systems under structural uncertainties.” Int. J. Control, 50, 1563–1566.
Spencer, B. F., and Sain, M. K., Jr. (1992). “Probabilistic stability measures for controlled structures subject to real parameter uncertainties.” Smart Mater. Struct., 1, 294–305.
Vanmarcke, E. (1983). Random fields, analysis and synthesis, MIT Press, Cambridge, Mass.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: May 18, 2004
Accepted: Nov 16, 2005
Published online: Aug 1, 2006
Published in print: Aug 2006
Notes
Note. Associate Editor: Raimondo Betti
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.