Porothermoelastic Analysis of the Response of a Stationary Crack Using the Displacement Discontinuity Method
Publication: Journal of Engineering Mechanics
Volume 132, Issue 1
Abstract
Thermally induced volumetric changes in rock result in pore pressure variations, and lead to a coupling between the thermal and poromechanical processes. This paper examines the response of a fracture in porothermoelastic rock when subjected to stress, pore pressure, and temperature perturbations. The contribution of each mechanism to the temporal variation of fracture opening is studied to elucidate its effect. This is achieved by development and use of a transient displacement discontinuity (DD) boundary element method for porothermoelasticity. While the full range of the crack opening due to the applied loads is investigated with the porothermoelastic DD, the asymptotic crack opening is ascertained analytically. Good agreement is observed between the numerical and analytical calculations. The results of the study show that, as expected, an applied stress causes the fracture to open while a pore pressure loading reduces the fracture width (aperture). In contrast to the pore pressure effect, cooling of the crack surfaces increases the fracture aperture. It is found that the impact of cooling can be more significant when compared to that of hydraulic loading (i.e., an applied stress and pore pressure) and can cause significant permeability enhancement, particularly for injection/extraction operations that are carried out over a long period of time in geothermal reservoirs.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The financial support of U.S. Department of Defense (Grant No. DDREN-68936-02-C-0214) and the University of North Dakota Faculty Seed Money Grant is gratefully acknowledged. The writers are grateful to three anonymous reviewers whose useful comments have improved the paper.
References
Bauer, S. J., and Handin, J. (1983). “Thermal expansion and cracking of three confined, water-saturated igneous rocks at 800°C.” Rock Mech. Rock Eng., 16, 181–198.
Biot, M. A. (1941). “General theory of three-dimensional consolidation.” J. Appl. Phys., 26, 182–185.
Brebbia, C. A., and Dominguez, J. (1989). Boundary elements: An introductory course, Computational Mechanics Publications, Southampton, United Kingdom.
Carter, J. P., and Booker, J. R. (1982). “Elastic consolidation around a deep circular tunnel.” Int. J. Solids Struct., 18(12), 1059–1074.
Carvalho, J. L. (1990). “Poroelastic effects and influence of material interfaces on hydraulic fracturing.” PhD dissertation, Univ. of Toronto, Toronto.
Cheng, A. H.-D., and Detournay, E. (1988). “A direct boundary element method for plane strain poroelasticity.” Int. J. Numer. Analyt. Meth. Geomech., 12, 551–572.
Cheng, A. H.-D., and Detournay, E. (1998). “On singular integral equations and fundamental solutions of poroelasticity.” Int. J. Solids Struct., 35(34/35), 4521–4555.
Cheng, A. H.-D., and Predeleanu, M. (1987). “Transient boundary element formulation for poroelasticity.” Appl. Math. Model., 11, 285–290.
Crouch, S. L., and Starfield, A. M. (1983). Boundary element methods in solid mechanics, Unwin, New York.
Curran, J. H., and Carvalho, J. L. (1987). “A displacement discontinuity model for fluid-saturated porous media.” Proc., 6th Congress of the ISRM, Vol. 1, Montreal, 73–78.
Delaney, P. T. (1982). “Rapid intrusion of magma into wet rock: groundwater flow due to pore pressure increases.” J. Geophys. Res. B, 87(9), 7739–7756.
Detournay, E., and Cheng, A. H.-D. (1991). “Plane strain analysis of a stationary hydraulic fracture in a poroelastic medium.” Int. J. Solids Struct., 37(13), 1645–1662.
Fredrich, J. T., and Wong, T.-F. (1986). “Mechanics of thermally induced cracking in three crustal rocks.” J. Geophys. Res., 91(B12), 12743–12754.
Ghassemi, A., and Roegiers, J.-C. (1996). “A three-dimensional poroelastic hydraulic fracture simulator using the displacement discontinuity method.” Proc., 2nd North American Rock Mechanics Symp., Vol. 1, Montreal, 982–987.
Ghassemi, A., Tarasovs, A., and Cheng, A. H.-D. (2003). “An integral equation method for modeling three-dimensional heat extraction from a fracture in hot dry rock.” Int. J. Numer. Analyt. Meth. Geomech., 27, 989–1004.
Ghassemi, A., Tarasovs, A., and Cheng, A. D.-H. (2005). “Integral equation solution of heat extraction induced thermal stress in enhanced geothermal reservoirs.” Int. J. Numer. Analyt. Meth. Geomech., 27(12), 989–1004.
Ghassemi, A., and Zhang, Q. (2004). “A transient fictitious stress boundary element method for porothermoelastic media.” Eng. Anal. Boundary Elem., 28(11), 1363–1373.
Li, X., Cui, L., and Roegiers, J.-C. (1998). “Thermoporoelastic modeling of wellbore stability in non-hydrostatic stress field.” Int. J. Rock Mech. Min. Sci., 35(4/5), paper No. 063.
McTigue, D. F. (1986). “Thermoelastic response of fluid-saturated porous rock.” J. Geophys. Res., 91(B9), 9533–9542.
Nowacki, W. (1973). Thermoelasticity, Pergamon, Oxford, United Kingdom.
Palciauskas, V. V., and Domenico, P. A. (1982). “Characterization of drained and undrained response of thermally loaded repository rocks.” Water Resour. Res., 18, 281–290.
Petty, S. (2002). “Thermal stimulation of well 83-16.” Creation of an Enhanced Geothermal System through Hydraulic and Thermal, P. E. Rose et al. eds., Univ. of Utah Energy and Geoscience Inst. Quarterly Rep., Salt Lake City, Utah.
Rice, J. R., and Cleary, M. P. (1976). “Some basis stress diffusion solutions for fluid-saturated elastic porous media with compressible constituents.” Rev. Geophys. Space Phys., 14, 227–241.
Sladek, V., and Sladek, J. (1984). “Boundary integral equation method in thermoelasticity, Part III: Uncoupled thermoelasticity.” Appl. Math. Model., 8, 413–418.
Sneddon, I. N. (1946). “The distribution of stress in the neighborhood of a crack in an elastic solid.” Proc. R. Soc. London, Ser. A, 187, 229–260.
Tanaka, M., Togoh, H., and Kikuta, M. (1984). “Boundary element method applied to 2D thermoelastic problems in steady and non-steady states.” Engineering Analysis, 1(1), 13–19.
Vandamme, L., Detournay, E., and Cheng, A. H.-D. (1989). “A two-dimensional poroelastic displacement discontinuity method for hydraulic fracture simulation.” Int. J. Numer. Analyt. Meth. Geomech., 13, 215–224.
Wang, H. F. (2000). Theory of linear poroelasticity with applications to geomechanics and hydrogeology, Princeton Univ. Press, Princeton, N.J.
Wang, Y., and Papamichos, E. (1994). “Conductive heat flow and thermally induced fluid flow around a well bore in a poroelastic medium.” Water Resour. Res., 30(12), 3375–3384.
Williams, H., and McBirney, A. R. (1979). Volcanology, Freeman Cooper, San Francisco.
Zhang, Q. (2004). “A boundary element method for thermo-poroelasticity with applications in rock mechanics.” Master’s thesis, Univ. of North Dakota, Grand Forks, N.D.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 132 • Issue 1 • January 2006
Pages: 26 - 33
Copyright
© 2005 ASCE.
History
Received: Aug 31, 2004
Accepted: Mar 14, 2005
Published online: Jan 1, 2006
Published in print: Jan 2006
Notes
Note. Associate Editor: Yunping Xi
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.