Planar Bending of Sandwich Beams with Transverse Loads off the Centroidal Axis
Publication: Journal of Engineering Mechanics
Volume 131, Issue 4
Abstract
Conventional analysis methods for beams do not distinguish between transverse loads that are applied at the beam centroidal axis and those acting either above or below the centroidal axis. In contrast, this paper formulates a sandwich beam finite element solution which models the effect of load height relative to the centroidal axis. Towards this goal, the governing equilibrium equations and associated boundary conditions are derived based on a Timoshenko beam formulation for the core material. Special shape functions satisfying the homogeneous form of the equilibrium equations are derived and subsequently used to formulate exact stiffness matrices. By omitting the stiffness terms related to the faces, the formulation for a homogeneous Timoshenko beam can be recovered. Also, the Euler–Bernouilli counterpart of the formulation is recovered as a limiting case of the current Timoshenko beam formulation. Effects of load height relative to the centroid are observed to have similarities with those induced by axial forces in beam-columns. For a simply supported beam, downward acting loads located below the centroidal axis are found to induce a stiffening effect while those acting above the centroidal axis are found to induce a softening effect, resulting in higher transverse displacements.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alfutov, N. A. (2000). Stability of elastic structures, Springer, Berlin, Germany.
Aydogan, M. (1995). “Stiffness-matrix formulation of beams with shear effect on elastic foundation.” J. Struct. Eng., 121(9), 1265–1270.
Bazoune, A., and Khulief, Y. A. (2003). “Shape functions of three-dimensional Timoshenko beam element.” J. Sound Vib., 259(2), 473–480.
Chen, W. F., and Lui, E. M. (1991). Stability design of steel frames, CRC, Boca Raton, Fla.
Cowper, G. R. (1966). “The shear coefficient in Timoshenko beam theory.” J. Appl. Mech., 33, 335–340.
Ettouney, M. M., and Schmidt, W. (1983). “Finite element solutions of deep beams.” J. Struct. Eng., 109(7), 1569–1984.
Friedman, Z., and Kosmatka, J. B. (1993). “An improved two-node Timoshenko beam finite element.” Comput. Struct., 47(3), 473–481.
Frostig, Y., and Baruch, M. (1993). “High-order buckling analysis of sandwich beams with transversely flexible core.” J. Eng. Mech., 119(3), 476–495.
Frostig, Y., Baruch, M., Vilnay, O., and Sheinman, I. (1992). “High-order theory for sandwich-beam behavior with transversely flexible core.” J. Eng. Mech., 118(5), 1026–1043.
Kosmatka, J. B. (1995). “An improved two-node finite element for stability and natural frequency of axial-loaded Timoshenko beams.” Comput. Struct., 57(1), 141–149.
Lee, K. H., Xavier, P. B., and Chew, C. H. (1993). “Static response of unsymmetric sandwich beams using an improved zigzag model.” Composites Eng., 3(3), 235–248.
Mucichescu, D. T. (1983). “Bounds for stiffness of prismatic beams.” J. Struct. Eng., 110(6), 1410–1414.
Oral, S. (1991). “Anisoparametric interpolation in hybrid-stress Timoshenko beam element.” J. Struct. Eng., 117(4), 1070–1078.
Ortuzar, J. M., and Samartin, A. (1998). “Some consistent finite element formulations of 1-D beam models: A comparative study.” Adv. Eng. Software, 29(7–9), 667–678.
Perel, V. Y., and Palazotto, A. N. (2001). “Finite element formulation for cylindrical bending of a transversely compressible sandwich plate, based on assumed transverse strains.” Int. J. Solids Struct., 38(30–31), 5373–5409.
Plantema, F. J. (1966). Sandwich construction: The bending and buckling of sandwich beams, plates and shells, Wiley, New York.
Reddy, J. N. (1996). Mechanics of laminated composite plates, CRC, Boca Raton, Fla.
Sokolinsky, V., and Frostig, Y. (1999). “Boundary condition effects in buckling of ‘soft’ core sandwich panels.” J. Eng. Mech., 125(8), 865–874.
Timoshenko, S. P., and Goodier, J. N. (1970). Theory of elasticity, 3rd Ed., McGraw-Hill, New York.
Wang, C. M. (1995). “Timoshenko beam-bending solutions in terms of Euler-Bernoulli solution.” J. Eng. Mech., 121(6), 763–765.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 131 • Issue 4 • April 2005
Pages: 385 - 396
Copyright
© 2005 ASCE.
History
Received: May 27, 2003
Accepted: Sep 24, 2004
Published online: Apr 1, 2005
Published in print: Apr 2005
Notes
Note. Associate Editor: Dewey H. Hodges
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.