Ultrasonic Characterization and Inspection of Open Cell Foams
Publication: Journal of Engineering Mechanics
Volume 131, Issue 11
Abstract
The nondestructive characterization of the material properties and the detection of hidden discontinuities in a highly porous, open cell, carbon foam using ultrasonics are presented. The propagation of ultrasonic waves in carbon foam specimens and their relationship with the elastic properties of the material are studied through theoretical modeling and laboratory experiments. The geometric and the overall elastic properties of the material are determined from microscopic data and wave propagation experiments performed under dry and fluid coupling conditions. A broadband, hybrid system based on laser generation and air-coupled detection of ultrasound is first employed for primary wave (P-wave) characterization. Significant discontinuities within the specimen are then detected using a narrowband, air-coupled ultrasonic setup as well as an automated fluid-coupled real-time intelligent ultrasonic setup. The use of the discrete wavelet transform is investigated as an effective tool for signal denoising in air-coupled ultrasonic probing of the foams. A simple, one-dimensional model, based on a periodic spring-mass system and a previously developed homogenization theory, is used to predict the wave speed.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abbate, A., Koay, J., Frankel, J., Schroeder, S. C., and Das, P. (1997). “Signal detection and noise suppression using a wavelet transform signal processor: Application to ultrasonic flaw detection.” IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 44(1), 14–26.
Berryman, G. (1980). “Confirmation of Biot’s theory.” Appl. Phys. Lett., 37, 382–384.
Biot, M. A. (1956a). “Theory of propagation of elastic waves in a fluid saturated porous solid. I. Low frequency range.” J. Acoust. Soc. Am., 28(2), 168–178.
Biot, M. A. (1956b). “Theory of propagation of elastic waves in a fluid saturated porous solid. II. High frequency range.” J. Acoust. Soc. Am., 28(2), 179–191.
Brillouin, L. (1946). Wave propagation in periodic structures, Dover, New York.
Christensen, R. M. (1986). “Mechanics of low density materials.” J. Mech. Phys. Solids, 34(6), 563–578.
Gallego, N. C., and Klett, J. W. (2003). “Carbon foams for thermal management.” Carbon, 41(7), 1461–1466.
Gibson, L. J., and Ashby, M. F. (1988). Cellular solids: Structure and properties, 1st Ed., Pergamon Press, New York.
Jeong, H., and Jang, Y.-S. (2000). “Fracture source location in thin plates using the wavelet transform of dispersive waves.” IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 47(3), 612–619.
Johnson, D. V., and Plona, T. J. (1982). “Acoustic slow waves and the consolidation transition.” J. Acoust. Soc. Am., 72(2), 556–565.
Lanza di Scalea, F., and McNamara, J. (2004). “Measuring high-frequency waves propagating in railroad tracks by joint time-frequency analysis.” J. Sound Vib., 273(3), 637–651.
Legendre, S., Massicotte, D., Goyette, J., and Bose, T. K. (2000). “Wavelet-transform-based method of analysis for Lamb-wave ultrasonic NDE signals.” IEEE Trans. Instrum. Meas., 49(3), 524–530.
Mal, A. K., Banerjee, S., and Rogers, D. (2002). “Ultrasonic waves in an open cell foam.” Proc., Smart NDE for Health Monitoring of Structural and Biological Systems, Vol. 4702, T. Kundu, ed., SPIE—The International Society for Optical Engineering, Newport Beach, Calif., 404–410.
Mal, A. K., and Bose, S. K. (1974). “Dynamic elastic moduli of a suspension of imperfectly bonded spheres.” Proc. Cambridge Philos. Soc., 76, 587–600.
Mal, A. K., and Knopoff, L. (1967). “Elastic wave velocities in two-component systems.” J. Inst. Math. Appl., 3, 376–387.
Mallat, S. (1999). A wavelet tour of signal processing, 2nd Ed., Academic Press, New York.
Mavko, G., Mukherji, T., and Dvorkin, J. (1998). The rock physics handbook: Tools for seismic analysis in porous media, Cambridge University Press, Cambridge.
McNamara, J., and Lanza di Scalea, F. (2004). “Improvements in non-contact ultrasonic testing of rails by the discrete wavelet transform.” Mater. Eval., 62(3), 365–372.
Paget, C. A., Grondel, S., Levin, K., and Delebarre, C. (2003). “Damage assessment in composites by Lamb waves and wavelet coefficients.” Smart Mater. Struct., 12(3), 393–402.
Rizzo, P., and Lanza di Scalea, F. (2005). “Ultrasonic inspection of multi-wire steel strands with the aid of the wavelet transform.” Smart Mater. Struct., 14(4), 685–695.
Scruby, C. B., and Drain, L. E. (1990). Laser ultrasonics: Techniques and applications, Adam Hilger, Bristol, England.
Staszewski, W., Pierce, G., Worden, K., Philp, W., Tomlinson, G., and Culshaw, B. (1997). “Wavelet signal processing for enhanced Lamb-wave defect detection in composite plates using optical fiber detection.” Opt. Eng., 36(7), 1877–1888.
Tuzzeo, D., and Lanza di Scalea, F. (2001). “Non-contact air-coupled ultrasonic guided waves for detection of hidden corrosion in aluminum plates.” Res. Nondestruct. Eval., 13(2), 61–78.
Zhu, H. X., Knott, J. F., and Mills, N. J. (1997). “Analysis of the elastic properties of open-cell foams with tetrakaidecahedral cells.” J. Mech. Phys. Solids, 45(3), 319–334.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Dec 3, 2003
Accepted: Feb 1, 2005
Published online: Nov 1, 2005
Published in print: Nov 2005
Notes
Note. Associate Editor: Eric N. Landis
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.