Recurrent Single Delaminated Beam Model for Vibration Analysis of Multidelaminated Beams
Publication: Journal of Engineering Mechanics
Volume 130, Issue 9
Abstract
Free vibration analysis of a through-width multidelaminated beam is performed in the present study. Multiple delaminations are assumed to spread from the top through the thickness direction of the beam. The natural frequencies of the multidelaminated beams are obtained from a recurrent single delaminated beam (RSDB) model, which is the subsingle delaminated beam from the top surface of a global beam. Each frequency equation for the RSDB with unknown boundary conditions is obtained through continuity conditions. Then this result is updated to the next one. With these sequential operations, the final frequency equation of the multidelaminated beams is obtained for both end boundary conditions of the global beam. The numerical results for the beams are compared with those of finite element analysis to give the reliance on the proposed model and to investigate the effects of the shape, number, and size of multidelaminations on the natural frequency. It was shown that the variations in the natural frequency for the multidelaminated beams were significantly affected by the delamination length.
Get full access to this article
View all available purchase options and get full access to this article.
References
Gaudenzi, P.(1997). “On delamination buckling of composite laminated under compressive loading.” Compos. Struct., 39(1–2), 21–30.
Hu, N., Fukunaga, H., Sekine, H., and Ali, K. M.(1999). “Compressive buckling of laminates with an embedded delamination.” Compos. Sci. Technol., 59(8), 1247–1260.
Huang, H., and Kardomateas, G. A.(1998). “Buckling of orthotropic beam-plates with multiple central delamination.” Int. J. Solids Struct., 35(13), 1355–1362.
Hwang, S. F., and Liu, G. H.(2001). “Buckling behavior of composite laminates with multiple delaminations under uniaxial compression.” Compos. Struct., 53, 235–243.
Jane, K. C., and Harn, Y. C.(2000). “Vibration of delaminated beam-plate with multiple delaminations under axial forces.” Mech. Struct. Mach., 28(1), 49–64.
Kim, H. J.(1997). “Postbuckling analysis of composite laminates with a delamination.” Comput. Struct., 62(6), 975–983.
Kyoung, W. M., Kim, C. G., and Hong, C. S.(1999). “Buckling and postbuckling behavior of composites cross-ply laminates with multiple delaminations.” Compos. Struct., 43, 257–274.
Lee, S., Park, T., and Voyiadjis, G. Z.(2002). “Free vibration analysis of axially compressed laminated composite beam–columns with multiple delaminations.” Composites, Part B, 33, 605–617.
Luo, H., and Hanagud, S.(2000). “Dynamics of delaminated beams.” Int. J. Solids Struct., 37, 1501–1519.
Mujumdar, P. M., and Suryanarayan, S.(1988). “Flexural vibration of beams with delaminations.” J. Sound Vib., 125(3), 441–461.
Pavier, J. M., and Clarke, M. P.(1995). “Experimental technique for the investigation of the effects of impact damage on carbon-fiber composites.” Compos. Sci. Technol., 55, 157–169.
Roche, C. H., and Accorsi, M. L.(1998). “A new finite element for global modeling of delaminations in laminated beams.” Finite Elem. Anal. Design, 31, 165–177.
Shen, M. H. H., and Grady, J. E.(1992). “Free vibrations of delaminated beams.” AIAA J., 30(5), 1361–1370.
Shu, D.(1995). “Vibration of sandwich beams with double delaminations.” Compos. Sci. Technol., 54(1), 101–109.
Shu, D.(1998). “Buckling of multiple delaminated beams.” Int. J. Solids Struct., 35(13), 1451–1465.
Suemasu, H.(1993). “Effects of multiple delaminations on compressive buckling behaviors of composite panels.” J. Compos. Mater., 27(12), 1172–1192.
Tracy, J. J., and Pardoen, G. C.(1989). “Effect of delamination on the natural frequencies of composite beams.” J. Compos. Mater., 23(12), 1200–1215.
Wang, J. T. S., and Lin, C. C.(1996). “Engineering analysis of buckling of delaminated beam plates.” Compos. Struct., 34(4), 397–407.
Wang, J. T. S., Liu, Y. Y., and Gibby, J. A.(1982). “Vibrations of split beams.” J. Sound Vib., 84(4), 491–502.
Wang, J. T. S., Pu, H. N., and Lin, C. C.(1997). “Buckling of beam-plates having multiple delamination.” J. Compos. Mater., 31(10), 1002–1025.
Wang, S. S., Zahlan, N. M., and Suemasu, H.(1985a). “Compressive stability of delaminated random short-fiber composites, Part I: Modeling and methods of analysis.” J. Compos. Mater., 19(7), 296–316.
Wang, S. S., Zahlan, N. M., and Suemasu, H.(1985b). “Compressive stability of delaminated random short-fiber composites, Part II: Experimental and analytical result.” J. Compos. Mater., 19(7), 317–333.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Jan 27, 2003
Accepted: Jan 26, 2004
Published online: Aug 16, 2004
Published in print: Sep 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.