Comprehensive Composite Inelastic Fiber Element for Cyclic Analysis of Concrete-Filled Steel Tube Columns
Publication: Journal of Engineering Mechanics
Volume 128, Issue 4
Abstract
This paper presents the development of a comprehensive composite beam-column fiber element for large displacement nonlinear inelastic analysis of concrete-filled steel tube (CFT) columns. The bond/slip formulation represents the interaction between concrete and steel over the entire contact surface between the two materials. Thus, the modeling accounts for the two factors that cause the slippage between steel shell and concrete core. The first factor is the difference between axial elongation of the steel shell and the concrete core, and the second is the difference between curvatures in the cross section for the concrete core and the steel shell. These effects are integrated over the perimeter and are added to the virtual work expression of the basic element. Furthermore, the constitutive models employed for concrete and steel are based on the results of a recent study and include the confinement and biaxial effects. A 13 degree of freedom (DOF) element with three nodes, which has five DOF per end node and three DOF on the middle node, has been chosen. The quadratic Lagrangian shape functions for axial deformation and the quartic Hermitian shape functions for the transverse directions are used. The model is implemented to analyze several CFT columns under constant concentric axial load and cyclic lateral load. The effect of semi- and perfect bond is investigated and compared with experiments. Good correlation has been found between experimental results and theoretical analyses. The results show that the use of a studded or ribbed steel shell causes greater ultimate strength and higher dissipation of energy than the columns with nonstudded steel shells.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ayoub, A., and Filippou, F. C. (1997). “A model for composite steel-concrete girders under cyclic loading.” Proc., ASCE Struct. Congr. XV, Vol. 1, L. Kempner Jr. and C. B. Brown, eds., ASCE, New York, 721–725.
BS 5400 Steel, Concrete and Composite Bridges. (1979). Code of practice for design of composite bridges, British Standards Institution, London.
Filippou, F. C., Popov, E. P., and Bertero, V. V. (1993). “Effects of bond deterioration on hysteretic behavior of reinforced concrete joints.” EERC Rep. No. 83/19, Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif.
Golafshani, A. A., Aval, B., B., and Saadeghvaziri, M. A. (1999). “An inelastic fiber element for analysis of concrete-filled steel tubes under cyclic loads.” Proc., 24th Conf. on our World in Concrete & Structures, Singapore.
Hajjar, J. F., and Gourley, B. C.(1996). “Representation of concrete-filled steel tube cross-section strength.” J. Struct. Eng., 122(11), 1327–1336.
Hajjar, J. F., and Gourley, B. C. (1997a). “A cyclic nonlinear model for concrete-filled tubes.” J. Struct. Eng., 123(6).
Hajjar, J. F., and Gourley, B. C.(1997). “Verification.” J. Struct. Eng., 123(6), 736–754.
Hajjar, J. F., Molodan, A., and Schiller, P. H.(1998a). “A distributed plasticity model for cyclic analysis of concrete-filled steel tube beam-columns and composite frames.” Eng. Struct., 20(4–6), 398–412.
Hajjar, J. F., Schiller, P. H., and Molodan, A.(1998b). “A distributed plasticity model for concrete-filled steel tube beam-columns with interlayer slip.” Eng. Struct., 20(8), 663–676.
Itoh, S., and Matsumura, H. (1992). “Steel-concrete composite structure using steel tube with ribs.” Proc., US–Japan Workshop Composites and Structures, Berkeley, Calif., 136–139.
Kent, D. C., and Park, R.(1971). “Flexural members with confined concrete.” J. Struct. Div. ASCE, 97(ST7), 1964–1990.
Menegotto, M., and Pinto, P. E. (1973). “Method of analysis for cyclically loaded reinforced concrete plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending.” Proc., IABSE Symp. on Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, Lisbon, Portugal.
Mohd Yassin, M. Y. (1994). “Nonlinear analysis of prestressed concrete structures under monotonic and cyclic loads.” PhD dissertation, Univ. of California, Berkeley, Calif.
Nakai, H., Kurita, A., and Ichinose, L. H. (1991). “An experimental study on creep of concrete filled steel pipes.” Proc., 3rd Int. Conf. Steel-Concrete Compos. Struct., M. Wakabayashi, ed., Assn. for Int. Cooperation and Res. in Steel-Concrete Composite Struct., Fukuoka, Japan, 55–65.
Okamato, T., and Maeno, T. (1988). “Experimental study on rectangular steel tube columns infilled with ultra high strength concrete hardened by centrifugal force.” Proc., Annual Meeting of AIJ, Chiba, Japan, 1359.
Sakino, K., and Ishibashi, H.(1985). “Experimental studies on concrete filled square steel tubular short columns subjected to cyclic shearing force and constant axial force.” Trans. Architectural Institute Jpn. (Tokyo), 353, 81–89.
Sakino, K., and Tomii, M.(1981). “Hysteretic behavior of concrete filled square shell tubular beam-columns failed in flexure.” Trans. Jpn. Concrete Institute (Tokyo), 3, 439–446.
Salari, M. R., Spacone, E., Shing, P. B., and Frangopol, D. M. (1997). “Behavior of composite structures under cyclic loading.” Proc., ASCE Struct. Congr. XV, Vol. 1, L. Kempner Jr. and C. B. Brown, eds., ASCE, New York, 731–735.
Scott, B. D., Park, R., and Priestley, M. J. N.(1982). “Stress–strain behavior of concrete confined by overlapping hoops at low and high strain rates.” ACI Struct. J., 79, 13–27.
Shakir-Khalil, H.(1993a). “Pushout strength of concrete-filled steel-hollow sections.” Struct. Eng., 71(13), 230–233.
Shakir-Khalil, H.(1993b). “Resistance of concrete-filled steel tubes pushout force.” Struct. Eng., 71(13), 234–243.
Shams, M., and Saadeghvaziri, M. Ala. (1997). “The state-of-the-art of concrete-filled steel tubular columns.” ACI Struct. J., 94(5).
Shams, M., and Saadeghvaziri, M. Ala. (1999). “Nonlinear response of CFT columns under axial load.” ACI Struct. J., 96(6).
Spacone, E., Filippou, F. C., and Taucer, F. F.(1996). “Fiber beam-column model for nonlinear analysis of R/C Frames. I: Formulation.” Earthquake Eng. Struct. Dyn., 25(7), 711–725.
Taylor, R. L. (1998). “FEAP—A Finite Element Analysis Program.” Dept. of Civil Engineering, Univ. of California, Berkeley, Calif.
Yoshioka, Y. (1992). “State of art of composite steel tube and concrete structures in Japan.” Proc., US–Japan Workshop, Composite and Hybrid Structures, Berkeley, Calif., 119–135.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Mar 24, 2000
Accepted: Feb 9, 2001
Published online: Apr 1, 2002
Published in print: Apr 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.