What Is a “Massive” Concrete Structure at Early Ages? Some Dimensional Arguments
Publication: Journal of Engineering Mechanics
Volume 127, Issue 5
Abstract
The risk of early-age concrete cracking depends on the capacity of hardening concrete to support the thermal stresses caused by the exothermic nature of the hydration process. This has been recognized for “massive” concrete structures. However, with the increasing use of high performance concretes, it is apparent that this problem also concerns traditionally “thin” structural members (columns, beams). The definition of a “massive” concrete structure, and how the structural dimension affects intensity and occurrence of chemically-induced strucctural degradation is the main focus of this paper. Based on dimensional analysis of the governing equations, a characteristic length scale, the hydration heat diffusion length, is derived; beyond this length the structure needs to be considered as “massive,” and latent hydration heat effects affect the long-term structural integrity. From experimental data of normal strength concrete and high performance concrete, it is shown that this hydration heat diffusion length of high performance concrete is of the order of ℓh = 0.2 m, and lh = 0.3 m for normal strength concrete. Through a number of case studies, the relevant similarity parameters of the risk of early-age concrete cracking are identified, which allow's the monitoring of the structural performance of early-age concrete structures.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Acker, P. ( 1988). “Mechanical behavior of concrete: A physico-chemical approach.” Res. Rep., LPC 152 Laboratoires des Ponts et Chaussées, Paris (in French).
2.
Acker, P., and Ulm, F.-J. ( 2000). “Creep and shrinkage of concrete: Physical origins and practical measurements.” Nuclear Engrg. and Des., in press.
3.
Barenblatt, G. I. ( 1996). Scaling, selfsimilarity, and intermediate asymptotics, Cambridge Texts in Applied Mathematics, Cambridge University Press, Cambridge, U.K.
4.
Boumiz, A., Vernet, C., and Tanoudji, C. F. ( 1996). “Mechanical properties of cement pastes and mortars at early ages: Evolution with time and degree of hydration.” Advn. Cement. Bas. Mat., 3, 92–106.
5.
Buckingham, E. ( 1914). “On physically similar systems: Illustrations of the use of dimensional analysis.” Phys. Rev., 4, 345–376.
6.
Byfors, J. ( 1980). “Plain concrete at early ages.” Res. Rep., F3:80, Swedish Cement and Concrete Res. Inst., Stockholm.
7.
Cervera, M., Oliver, J., and Prato, T. (1999). “Thermo-chemo-mechanical model for concrete. I: Hydration and aging.”J. Engrg. Mech., ASCE, 125(9), 1018–1027.
8.
Coussy, O. ( 1995). Mechanics of porous continua, Wiley, Chichester, U.K.
9.
Coussy, O., and Ulm, F.-J. ( 1996). “Creep and plasticity due to chemo-mechanical couplings.” Archive of Appl. Mech., 66, 523–535.
10.
Hellmich, C., Ulm, F.-J., and Mang, H. A. (1999a). “Multisurface chemoplasticity. I: Material model for shotcrete.”J. Engrg. Mech., ASCE, 125(6), 692–701.
11.
Hellmich, C., Ulm, F.-J., and Mang, H. A. ( 1999b). “Consistent linearization in finite element analysis of coupled chemo-thermal problems with exo- or endothermal reactions.” Computational Mech., 24(4), 238–244.
12.
Powers, G., and Brownyard, T. L. ( 1948). “Studies of the physical properties of hardened Portland cement paste.” Res. Bull. 22, Portland Cement Association, Skokie, Ill.
13.
Sercombe, J., Hellmich, C., Ulm, F.-J., and Mang, H. (2000). “Modeling of early-age creep of shotcrete. I: Model and model parameters.”J. Engrg. Mech., ASCE, 126(3), 284–291.
14.
Sercombe, J., Ulm, F.-J., and Mang, H. A. ( 2000). “Consistent return mapping algorithm for chemoplastic constitutive laws with internal couplings,” Int. J. Numer. Methods in Engrg., 47, 75–100.
15.
Sonin, A. A. ( 1997). The physical basis of dimensional analysis. Dept. of Mech. Engrg., Massachusetts Institute of Technology, Cambridge, Mass.
16.
Ulm, F.-J., and Coussy, O. (1995). “Modeling of thermochemomechanical couplings of concrete at early ages.”J. Engrg. Mech., ASCE, 121(7), 785–794.
17.
Ulm, F.-J. ( 1996). “Modélisation du béton au jeune âge (Modeling of concrete at early ages.” CESAR-LCPC 3.2: Program Manuel, 3rd Ed., LCPC, Paris (in French).
18.
Ulm, F.-J., and Coussy, O. (1996). “Strength growth as chemo-plastic hardening in early age concrete.”J. Engrg. Mech., ASCE, 122(12), 1123–1132.
19.
Ulm, F.-J., and Coussy, O. ( 1998). “Couplings in early-age concrete: From material modeling to structural design.” Int. J. Solids and Struct., 35(31–32), 4295–4311.
20.
Ulm, F.-J., Coussy, O., and Hellmich, C. ( 1998). “Chemoplasticity: A review of evidence.” Computational modelling of concrete structures, R. de Borst, N. Bicanic, H. Mang, and G. Meschke, eds., Balkema, Rotterdam, The Netherlands, 421–439.
21.
Willam, K. J., and Warnke, E. P. ( 1975). “Constitutive model for the triaxial behavior of concrete.” IABSE Proc., 19, Seminar on concrete structures subjected to triaxial stresses, Paper III-1, International Association for Bridge and Structural Engineering, Zurich.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 127 • Issue 5 • May 2001
Pages: 512 - 522
History
Received: Mar 29, 2000
Published online: May 1, 2001
Published in print: May 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.