Discharge and the Eccentricity of the Hopper Influence on the Silo Wall Pressures
Publication: Journal of Engineering Mechanics
Volume 127, Issue 10
Abstract
The objective of this work is to perform an analysis of pressure distributions in grain silos for both the discharge and static conditions with eccentric outlets. To this end, the commercial ANSYS program, based on the finite-element method is employed. In this paper, results are presented for a silo with a height of 10.5 m (cylinder height 8 m, base cone height 2.5 m), a silo radius of 3 m, and an outlet radius of 0.5 m. Outlet eccentricity ranged from 0% (central outlet) to 100% (maximally eccentric outlet, tangential to the silo cylinder). Based on the results, this paper proposes new methods of analyzing silo discharge and the influence of outlet eccentricity. The discharge model combines both dilatancy and type of discharge effects. 3D models were developed to analyze the eccentricity of the outlet. The results are compared with previous research data and with standard design guidelines.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Aguado, P., Ayuga, F., Guaita, M., Gutiérrez, P., Morán, J., and Juan, A. ( 1999). “Predicting stress fields in agricultural silos during discharge.” Proc., 1999 ASAE/CSAE Annu. Int. Meeting, ASAE, St. Joseph, Mich.
2.
ANSYS user's manual for revision 5.3. (1998). Swanson Analysis Systems Inc., Houston.
3.
Deutsch, G. P., and Schmidt, L. C. (1968). “Pressures on silo walls.”J. Engrg. Mech. Div., ASCE.
4.
Drucker, D. C., and Prager, W. ( 1952). “Soil mechanics and plastic analysis on limit design.” Quart. Appl. Math., 10(2), 157–165.
5.
European Committee for Standardization (CEN). ( 1995). “Eurocode 1. Part 4: Basis of design and actions on structures. Actions on silos and tanks.” ENV 1991-4, Brussels.
6.
Guaita, M., Ayuga, F., and García-Vaquero, E. ( 1996). “Silage material parameters which determine lateral pressures obtained by the finite element method.” Proc., Int. Conf. on Agric. Engrg., AgEng'96, EurAgEng., Silsoe, Bedford, U.K.
7.
Janssen, H. A. ( 1895). “Versuch üuber Getreidedruck in Sillozellen [Experiments on grain loads in silo cells].” Zeischrift des Vesein Deutscher Ingenieurs, 39, 1045–1049 (in German).
8.
Jenike, A. W., and Johanson, J. R. (1968). “Bins loads.”J. Struct. Div., ASCE, 94(4), 1011–1041.
9.
Jofriet, J. C., Negi, S. C., and Lu, Z. ( 1997). “Parametric study of bin loads using a hybrid numerical model.” ASAE Meeting Presentation, Minneapolis.
10.
Kim, V. S. ( 1959). “Davlenie Zerna i Sovershenstvovanie Konstrukstii Silosov [Grain actions on silos and construction procedures].” Khleboissdat, Moscow (in Russian).
11.
Pieper, K., and Stamou, K. ( 1981). Lasten in Niedriguen Silos, Technische Universitat, Braunschweig, Germany (in German).
12.
Pieper, K., and Wagner, K. ( 1969). “Der Einfluss Verscheidener Auslaufarten auf die Seitendrucke in Silozellen [The influence of different types of discharge on the silo cells loads].” Aufbereitungs-Technik, Wiesbaden, Germany (in German).
13.
Platonov, P. N., and Kovtun, A. P. ( 1959). “Davlenie Zerna na Stenki Silosov Elevatorov [Grain loads on the silo walls].” Mukomolno Elevatornaia Promyshlennost, Moscow, 25(12), 22–24 (in Russian).
14.
Ravenet, J. ( 1977). Silos, Editores Técnicos Asociados, Barcelona, Spain.
15.
Rong, G. ( 1994). “Discrete element modeling for flow of particulate materials in bins.” PhD thesis, University of Guelph, Ont., Canada.
16.
Rotter, M., Ooi, J., Holst, M., and Zhong, Z. ( 1997). “Comparative evaluation of numerical methods for predicting flow and stress fields in silos.” EPSRC DEMFEM International Collaboration, CA-SILO Collaborative Action: WG5, 〈http://oats.civ.ed.ac.uk/research/silo/demfem/〉.
17.
Sugita, M. ( 1972). Flow and pressures of no-cohesive granular materials in funnel flow bin, ASME, 1–8.
18.
Zhang, Q., Britton, M. G., and Xu, S. ( 1994). “Using dilatancy angle to predict dynamic loads during discharge in bulk solid storage structures.” Proc., Powder and Bulk Solids '94, Rosemont, Ill., 383–390.
Information & Authors
Information
Published In
History
Received: Apr 27, 2001
Published online: Oct 1, 2001
Published in print: Oct 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.