Simultaneous Estimation of System and Input Parameters from Output Measurements
Publication: Journal of Engineering Mechanics
Volume 126, Issue 7
Abstract
System identification of very large structures is of necessity accomplished by analyzing output measurements, as in the case of ambient vibration surveys. Conventional techniques typically identify system parameters by assuming (arguably) that the input is locally Gaussian white, and in so doing, effectively reduce the number of degrees of freedom of the estimation problem to a more tractable number. This paper describes a new approach that has several novel attributes, among them, elimination of the need for the Gaussian white input assumption. The approach involves a filter applied to an identification problem formulated in the frequency domain. The filter simultaneously estimates both system parameters and input excitation characteristics. The estimates we obtain are not guaranteed to be unique (as is true in all other approaches: simultaneous estimation of both system and input possesses too many degrees of freedom to guarantee uniqueness); but we do, nonetheless, identify system parameters and input excitation characteristics that are physically plausible and intuitively reasonable, without making input excitation assumptions. Simulated and laboratory experimental data are used to verify the algorithm and demonstrate its advantages over conventional approaches.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Åström, K. J., and Eykhoff, P. (1971). “System identification—a survey.” Automatica, Vol. 7.
2.
Balakrishnan, A. V. (1984). Kalman filtering theory, Optimization Software, Inc., University Series in Modern Engineering, New York.
3.
Beck, J. L., May, B. S., and Polodori, D. C. (1994). “Determination of modal parameters from ambient vibration data for structural health monitoring.” Proc., 1st World Conf. on Struct. Control, University of California, Los Angeles, Calif.
4.
Bekey, G. A. (1970). “System identification—an introduction and a survey.” Simulation, 15.
5.
Bendat, J. S., and Piersol, A. G. (1986). Random data, 2nd Ed., Wiley, New York.
6.
Bowles, R. L., and Straeter, T. A. ( 1972). “System identification computational considerations.” System identification of vibrating structures, W. D. Pilkey and R. Cohen, eds., American Society of Mechanical Engineers, New York.
7.
Conte, J. P., and Krishnan, S. (1995). “Modal identification method for structures subjected to unmeasured random excitations.” Proc., 10th Engrg. Mech. Conf., American Society of Civil Engineers, New York.
8.
Eykhoff, P. (1974). System identification—parameter and state estimation, Wiley, New York.
9.
Gelb, A. (1974). Applied optimal estimation, MIT Press, Cambridge, Mass.
10.
Hoshiya, M., and Saito, E. (1984). “Structural identification by extended Kalman filter.”J. Engrg. Mech., ASCE, 110(12), 1757–1770.
11.
Hoshiya, M., and Sutoh, A. (1993). “Kalman filter—finite element method in identification.”J. Engrg. Mech., ASCE, 119(2).
12.
Ibrahim, S. R., and Mikulcik, E. C. (1973). “A time-domain modal vibration test technique.” Shock and Vibr. Bull., 43, Part 4.
13.
Imai, H., Yun, C. B., Maruyama, O., and Shinozuka, M. (1989). “Fundamentals of system identification in structural dynamics.” Prob. Engr. Mech., 4(4).
14.
Jazwinski, A. H. (1970). Stochastic processes and filtering theory, Academic Press, New York.
15.
Jones, N. P., Shi, T., Ellis, H., and Scanlan, R. H. (1993). “System identification procedure for structural parameters and wind characteristics in ambient vibration surveys.” 3rd Asia-Pacific Symp. on Wind Engrg., University of Hong Kong, Hong Kong.
16.
Juang, J. N., and Pappa, R. S. (1984). “An eigensystem realization algorithm for modal parameter identification and modal reduction.” Proc., 4th Int. Conf. Appl. Numer. Modeling, J. of Guidance, Control, and Dyn., 8(5), 620–627.
17.
Kalman, R. E. (1960). “A new approach to linear filtering and prediction problems.” J. Basic Engrg., ASME, Series D, Vol. 82.
18.
Koh, G. C., and See, L. M. (1994). “Identification and uncertainty estimation of structural parameters.”J. Engrg. Mech., ASCE, 120(6).
19.
Kozin, F., and Natke, H. G. (1986). “System identification techniques.” Struct. Safety, 3(3–4), 269–316.
20.
Lawry, M. (1990). I-DEAS student guide, Structural Dynamics Research Corp., Cincinnati, Ohio.
21.
Ljung, L. (1987). System identification: Theory for the user, Prentice-Hall, Englewood Cliffs, N.J.
22.
Maruyama, O., Yun, C. B., Hoshiya, M., and Shinozuka, M. (1989). “Program EXKAL2 for identification of structural dynamic systems.” Tech. Rep. NCEER-89-0014, National Center for Earthquake Engineering Research, Buffalo, N.Y.
23.
Maybeck, P. S. (1982). Stochastic models, estimation, and control, Vol. I and Vol. II, Academic Press, San Diego, Calif.
24.
Nieman, R. E., Fischer, D. G., and Seborg, D. E. (1971). “A review of process identification and parameter estimation techniques.” Int. J. Control, Vol. 13.
25.
Pandit, S. M. (1991). Modal and spectrum analysis: Data dependent systems in state space, Wiley, New York.
26.
Sage, A. P. ( 1972). “System identification history, methodology, future prospects.” System identification of vibrating structures, W. D. Pilkey and R. Cohen, eds., American Society of Mechanical Engineers, New York.
27.
Sarkar, P. P. ( 1992). “New identification methods applied to the response of flexible bridges to wind.” PhD dissertation, The Johns Hopkins University, Baltimore, Md.
28.
Shinozuka, M., and Deodatis, G. (1991). “Stochastic processes by spectrum representation.” Appl. Mech. Rev., 44(4).
29.
Strang, G. (1986). Introduction to applied mathematics, Wellesley, Mass.
30.
Vandiver, J. K., Dunwoody, A. B., Campbell, R. B., and Cook, M. F. (1982). “A mathematical basis for the random decrement vibration signature analysis technique.” J. Mech. Des., April.
Information & Authors
Information
Published In
History
Received: Feb 25, 2000
Published online: Jul 1, 2000
Published in print: Jul 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.