Perforated Wall Breakwater with Internal Horizontal Plate
Publication: Journal of Engineering Mechanics
Volume 126, Issue 5
Abstract
The hydrodynamic performance of a perforated wall breakwater with an internal horizontal plate is studied. It is suggested that a horizontally submerged plate be installed inside the wave chamber to enhance the stability of the structure. Based on the linear wave theory, the 2D problem is formulated to analyze the wave reflection with different porosity, physical dimensions, and wave conditions. The method of matched eigenfunction expansions is used to obtain the solution. Generally, the hydrodynamic performance of a wave chamber is similar with or without an internal horizontal plate. However, the minimum reflection occurs at some particular ratios of the length of the wave chamber to the wavelength, which are less than the corresponding ratios for a wave chamber without the plate, because the waves become shorter over the submerged plate. Thus, the size of the wave chamber can be reduced. It is also found that a moderate porosity is optimal to dissipate the wave energy. By investigating the wave-induced force and moment, such breakwaters with an internal horizontal plate can be designed and constructed with a higher degree of confidence and reliability.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Chwang, A. T. (1983). “A porous wavemaker theory.” J. Fluid Mech., Cambridge, U.K., 132, 395–406.
2.
Chwang, A. T., and Chan, A. T. (1998). “Interaction between porous media and wave motion.” Annu. Rev. of Fluid Mech., 30, 53–58.
3.
Chwang, A. T., and Dong, Z. (1984). “Wave-trapping due to a porous plate.” Proc., 15th Symp. on Naval Hydrodynamics, National Academy Press, Washington, D.C., 407–417.
4.
Chwang, A. T., and Li, W. (1983). “A piston-type porous wavemaker theory.” J. Engrg. Mathematics, 17, 301–313.
5.
Dalrymple, R. A., and Martin, P. A. (1990). “Wave diffraction through offshore breakwaters.”J. Wtrwy., Port, Coast., and Oc. Engrg., ASCE, 116(6), 727–741.
6.
Jarlan, G. E. (1961). “A perforated vertical breakwater.” The Dock and Harbour Authority, 41(488), 394–398.
7.
Lee, M. M., and Chwang, A. T. (2000). “Scattering and radiation of water waves by permeable barriers.” Phys. of Fluids, 12(1), 54–65.
8.
Miles, J., and Munk, W. (1961). “Harbour paradox.”J. Wtrwy. and Harb. Div., ASCE, 87(3), 111–130.
9.
Sahoo, T. (1998). “On the scattering of water waves by porous barriers.” Zeitschrift fur Angewandte Mathematik und Mechanik, Berlin, Germany, 78(5), 364–370.
10.
Twu, S. W., and Duann, J. J. (1995). “An approach for eliminating re-reflected waves.” Oc. Engrg., 22(5), 421–437.
11.
Twu, S. W., and Lin, D. T. (1991). “On a highly effective wave absorber.” Coast. Engrg., 15, 389–405.
12.
Wu, J., Wan, Z., and Fang, F. (1998). “Wave reflection by a vertical wall with a horizontal submerged porous plate.” Oc. Engrg., 25(9), 767–779.
13.
Yip, T. L., and Chwang, A. T. (1997). “Water wave control by a pitching plate.”J. Engrg. Mech., ASCE, 123(8), 800–807.
14.
Yu, X., and Chwang, A. T. (1993). “Analysis of wave scattering by submerged circular disk.”J. Engrg. Mech., ASCE, 119(9), 1804–1817.
15.
Yu, X., and Chwang, A. T. (1994a). “Wave-induced oscillation in harbor with porous breakwaters.”J. Wtrwy., Port, Coast., and Oc. Engrg., ASCE, 120(2), 125–144.
16.
Yu, X., and Chwang, A. T. (1994b). “Water waves above submerged porous plate.”J. Engrg. Mech., ASCE, 120(6), 1270–1282.
Information & Authors
Information
Published In
History
Received: May 28, 1999
Published online: May 1, 2000
Published in print: May 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.