Microstructural Modeling for Elastic Moduli of Bonded Granules
Publication: Journal of Engineering Mechanics
Volume 125, Issue 6
Abstract
In this paper, a microgranular mechanics approach is used to derive an expression for the elastic moduli of an assembly of bonded granulates, based on the response of two particles that are connected by an elastic binder. The derived modulus is a function of the particle/binder modulus, the particle size, the binder thickness, the binder width, the assembly coordination number, the binder content, and the porosity. To demonstrate its applicability, the predicted range of the modulus using the derived model is compared with that measured from experiments. The difference between this method and the traditional homogenization models will be discussed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Cambou, B., Dubuiet, P., Emeriault, F., and Sidoroff, F. ( 1995). “Homogenization for granular materials.” Eur. J. Mech. A/Solids, 14(2), 255–276.
2.
Chang, C. S., and Liao, C. L. ( 1994). “Estimates of elastic modulus for media of randomly packed granules.” Appl. Mech. Rev., 47(2), Part 2, 197–206.
3.
Chang, C. S., Sundaram, S. S., and Misra, A. ( 1989). “Initial moduli of particulated mass with frictional contacts.” Int. J. Numer. and Analytical Methods in Geomech., 13(6), 626–641.
4.
Chatterjee, A. K., Mal, A. K., and Knopoff, L. ( 1976). “Elastic moduli of two component systems.” J. Geophys. Res., 83, 1785–1792.
5.
Digby, P. J. ( 1981). “The effective elastic moduli of porous granular rock.” J. Appl. Mech., 48(4), 803–808.
6.
Hardin, B. O., and Drnevich, V. P. (1972). “Shear modulus and damping in soils: Measurements and parameter effects.”J. Soil Mech. and Found. Div., ASCE, 92(2), 603–624.
7.
Hashin, Z., and Shtrikman, S. ( 1962). “On some variational principles in anisotropic and non-homogeneous elasticity.” J. Mech. Phys. Solids, 10, 335–342.
8.
Hill, R. ( 1965). “A self-consistent mechanics of composite materials.” J. Mech. Phys. Solids, 13, 213–222.
9.
Huang, Y. H. ( 1993). Pavement analysis and design. Prentice-Hall, Englewood Cliffs, N.J.
10.
Kandhal, P. S., and Chakraborty, S. ( 1996). “Effect of asphalt film thickness on short- and long-term aging of asphalt paving mixtures.” Transp. Res. Rec. 1535, Transportation Research Board, Washington, D.C., 83–90.
11.
Mindess, S., and Young, J. F. ( 1981). Concrete. Prentice-Hall, Englewood Cliffs, N.J.
12.
Parker, E. R. ( 1967). Materials data book for engineer and scientists. McGraw-Hill, New York.
13.
Walpole, L. J. ( 1972). “The elastic behavior of a suspension of spherical particles.” Quarterly J. Mech. and Appl. Math., 25, 153–160.
14.
Walton, K. ( 1987). “The effective elastic moduli of a random packing of spheres.” J. Mech. Phys. Solids, 35(2), 213–226.
15.
Willis, J. R., and Acton, J. R. ( 1976). “The overall elastic moduli of a dilute suspension of spheres.” Quarterly J. Mech. and Appl. Math., 29, 163–177.
16.
Zhu, H., Chang, C. S., and Rish, J. W. ( 1996). “Normal and tangential compliance for conforming binder contact. I: Elastic binder.” Int. J. Solids Struct., 23(29), 4337–4349.
17.
Zimmerman, R. W. ( 1984). “Elastic moduli of solid with spherical pores: New self-consistent method.” Int. J. Rock Mech. and Mining Sci. & Geomech. Abstract, 21, 339–343.
Information & Authors
Information
Published In
History
Received: Jun 1, 1998
Published online: Jun 1, 1999
Published in print: Jun 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.