New Approximations for Reliability Integrals
Publication: Journal of Engineering Mechanics
Volume 125, Issue 4
Abstract
A new asymptotic expansion is applied to approximate reliability integrals. The asymptotic approximation reduces the problem of evaluating a multidimensional probability integral to solving an unconstrained minimization problem. Approximations are developed in both the transformed (independently, normally distributed) variables and the original variables. In the transformed variables, the asymptotic approximation yields a very simple formula for approximating the value of the second-order reliability method integrals. In many cases, it may be computationally expensive to transform to normal variables, and an approximation using the probability distribution for the original variables can be used. Examples are presented illustrating the accuracy of the approximations, and results are compared with some existing approximations of reliability integrals.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bleistein, N., and Handelsman, R. ( 1986). Asymptotic expansions for integrals. Dover Publications, New York.
2.
Breitung, K. (1984). “Asymptotic approximations for multinormal integrals.”J. Engrg. Mech., ASCE, 110(3), 357–366.
3.
Breitung, K. ( 1989). “Asymptotic approximation for probability integrals.” Probabilistic Engrg. Mech., Oxford, England, 4(4), 187–190.
4.
Breitung, K. (1991). “Probability approximations by log likelihood maximization.”J. Engrg. Mech., ASCE, 117(3), 457–477.
5.
Bucher, C. G. ( 1988). “Adaptive sampling—an iterative fast Monte Carlo procedure.” Struct. Safety, Amsterdam, 5, 119–126.
6.
Cherng, R. H., and Wen, Y. K. (1994). “Reliability of uncertain nonlinear trusses under random excitation II.”J. Engrg. Mech., ASCE, 120(4), 748–757.
7.
Der Kiureghian, A., Lin, H. Z., and Hwang, S. J. (1987). “Second-order reliability approximations.”J. Engrg. Mech., ASCE, 113(8), 1208–1225.
8.
Faravelli, L. (1989). “A response surface approach for reliability analysis.”J. Engrg. Mech., ASCE, 115(2), 2763–2781.
9.
Flanders, H. ( 1963). Differential forms with applications to the physical sciences. Dover, New York.
10.
Hohenbichler, M., and Rackwitz, R. (1988). “Improvement of second-order reliability estimates by importance sampling.”J. Engrg. Mech., ASCE, 114(12), 2195–2198.
11.
Igusa, T., and Der Kiureghian, A. (1988). “Response of uncertain systems to stochastic excitation.”J. Engrg. Mech., ASCE, 114(5), 812–832.
12.
Köylüolu, H. U., and Nielsen, S. R. K. ( 1994). “New approximations for SORM integrals.” Struct. Safety, Amsterdam, 13, 235–246.
13.
Lin, Y. K. ( 1967). Probabilistic theory of structural dynamics. McGraw-Hill, New York.
14.
Madsen, H. O., Krenk, S., and Lind, N. C. ( 1986). Methods of structural safety. Prentice-Hall, Englewood Cliffs, N.J.
15.
May, B. S., and Beck, J. L. ( 1998). “Probabilistic control for the active mass driver benchmark structural model.” Earthquake Engrg. and Struct. Dynamics, 27, 1331–1346.
16.
Papadimitriou, C., Beck, J. L., and Katafygiotis, L. S. ( 1995). “Asymptotic expansions for reliabilities and moments of uncertain dynamic systems.” Tech. Rep. EERL 95-05, California Institute of Technology, Pasadena, Calif.
17.
Papadimitriou, C., Beck, J. L., and Katafygiotis, L. S. (1997a). “Asymptotic expansions for reliabilities and moments of uncertain systems.”J. Engrg. Mech., ASCE, 123(12), 1219–1229.
18.
Papadimitriou, C., and Katafygiotis, L. S. ( 1996). “Response statistics and reliability of uncertain nonlinear systems subjected to random loads.” Proc., 11th World Conf. on Earthquake Engrg., Elsevier Science.
19.
Papadimitriou, C., Katafygiotis, L. S., and Au, S. K. ( 1997b). “Effects of structural uncertainties on TMD design: A reliability-based approach.” J. Struct. Control, 4(1), 65–88.
20.
Polidori, D. C. ( 1997). “A probabilistic treatment of uncertainty in nonlinear dynamical systems.” Tech. Rep. EERL 97-09, California Institute of Technology, Pasadena, Calif.
21.
Rosenblatt, M. ( 1952). “Remarks on a multivariate transformation.” Annals of Math. Statistics, 23, 470–472.
22.
Rubinstein, R. Y. ( 1981). Simulation and the Monte-Carlo method. Wiley, New York.
23.
Schuëller, G. I., and Stix, R. ( 1987). “A critical appraisal of methods to determine failure probabilities.” Struct. Safety, Amsterdam, 4, 293–309.
24.
Thoft-Christensen, P., and Murotsu, Y. ( 1986). Application of structural systems reliability theory. Springer, New York.
25.
Tvedt, L. ( 1983). “Two second-order approximations to the failure probability.” Tech. Rep. RDIV/20-004-83, Det Norske Veritas, Oslo.
26.
Wen, Y. K., and Chen, H. C. ( 1987). “On fast integration for time variant structural reliability.” Probabilistic Engrg. Mech., Oxford, England, 2(3), 156–162.
27.
Wolfram, S. ( 1996). The mathematica book. Cambridge University Press, New York.
28.
Yang, C.-M., and Beck, J. L. ( 1998). “Generalized trajectory methods for finding multiple extrema and roots of functions.” J. Optimization Theory and Applications, 97(1), 211–227.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 125 • Issue 4 • April 1999
Pages: 466 - 475
History
Received: Nov 4, 1997
Published online: Apr 1, 1999
Published in print: Apr 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.