Symmetry of Tangent Stiffness Matrices of 3D Elastic Frame
Publication: Journal of Engineering Mechanics
Volume 125, Issue 2
Abstract
In the literature, the symmetry of the element tangent stiffness matrix of a spatial elastic beam has been a subject of debate. The symmetry of the tangent stiffness matrices derived by some researchers are tenuously attributed to the use of Lagrangian formulations, while the asymmetry of corotational tangent stiffness matrices is commonly attributed to the noncommutativity of spatial rotations. In this paper, the inconsistency regarding the symmetry of element tangent stiffness matrices formulated in the Lagrangian and the corotational frameworks is resolved. It is shown that, irrespective of the formulation framework, the element tangent stiffness matrix is invariably asymmetric. A “correction matrix” that enforces the proper rotational behavior of nodal moments into the conventional geometric stiffness matrix of an Updated Lagrangian spatial beam element is presented. It is demonstrated through a numerical example that adoption of this correction matrix is necessary for the detection of the lowest buckling mode of a space dome. The fact that the structure tangent stiffness matrix becomes symmetric at the converged solution of each increment in the geometrically nonlinear analysis of a space frame is also explained.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Al-Bermani, F. G. A., and Kitipornchai, S. (1990). “Nonlinear analysis of thin-walled structures using least element/member.”J. Struct. Engrg., ASCE, 116(1), 215–234.
2.
Argyris, J. H., Dunne, P. C., and Scharpf, D. W. ( 1978). “On large displacement–small strain analysis of structures with rotational degrees of freedom.” Computational Methods of Appl. Mech. and Engrg., 14, 401–451; 15, 99–135.
3.
Argyris, J. H., Hilpert, O., Malejannakis, G. A., and Scharpf, D. W. ( 1979). “On the geometrical stiffnesses of a beam in space—a consistent V.W. approach.” Computational Methods of Appl. Mech. and Engrg., 20, 105–131.
4.
Cardona, A., and Geradin, M. ( 1988). “A beam finite element non-linear theory with finite rotations.” Int. J. Numer. Methods in Engrg., 26, 2403–2438.
5.
Chan, S. L. ( 1988). “Geometric and material nonlinear analysis of beam columns and frames using the minimum residual displacement method.” Int. J. Numer. Methods in Engrg., 26, 2657–2669.
6.
Chen, C. S. ( 1994). “Geometric nonlinear analysis of three-dimensional structures,” MS thesis, Cornwell University, Ithaca, N.Y.
7.
Clarke, M. J., and Hancock, G. J. ( 1990). “A study of incremental-iterative strategies for non-linear analyses.” Int. J. Numer. Methods in Engrg., 29, 1365–1391.
8.
Conci, A. (1992). “Stiffness matrix for nonlinear analysis of thin-walled frames.”J. Engrg. Mech., ASCE, 118(9), 1859–1875.
9.
Conci, A., and Gattass, M. ( 1990). “Natural approach for geometric nonlinear analysis of thin-walled frames.” Int. J. Numer. Methods in Engrg., 30, 207–231.
10.
Crisfield, M. A. ( 1981). “A fast incremental/iterative solution procedure that handles snap-through.” Comp. and Struct., 13, 55–62.
11.
Crisfield, M. A. ( 1997). Non-linear finite element analysis of solids and structures, Vol. 2, Wiley, Chichester, U.K.
12.
Donald, G. S., and Kleeman, P. W. ( 1971). “A stiffness matrix for the large deflection analysis of space structures.” Proc., 3rd Australasian Conf. on Struct. and Mat., Auckland, New Zealand.
13.
Elias, Z. M. ( 1986). Theory and methods of structural analysis. Wiley, New York.
14.
Izzuddin, B. A., and Elnashai, A. S. (1993). “Eulerian formulation for large-displacement analysis of space frames.”J. Engrg. Mech., ASCE, 119(3), 549–569.
15.
Kassimali, A., and Abbasnia, R. (1991). “Large deformation analysis of elastic space frames.”J. Struct. Engrg., ASCE, 117(7), 2069–2087.
16.
Kouhia, R., and Tuomala, M. ( 1993). “Static and dynamic analysis of space frames using simple Timoshenko type elements.” Int. J. Numer. Methods in Engrg., 36, 1189–1221.
17.
Nour-Omid, B., and Rankin, C. C. ( 1991). “Finite rotation analysis and consistent linearisation using projectors.” Computational Methods of Appl. Mech. and Engrg., 93, 353–384.
18.
Oran, C. (1973). “Tangent stiffness in space frames.”J. Struct. Div., ASCE, 99(6), 987–1001.
19.
Papadrakakis, M., and Ghionis, P. ( 1986). “Conjugate gradient algorithms in nonlinear structural analysis problems.” Computational Methods of Appl. Mech. and Engrg., 59, 11–27.
20.
Remseth, S. N. ( 1979). “Nonlinear static and dynamic analysis of framed structures.” Comp. and Struct., 10, 879–897.
21.
Rhim, J., and Lee, S. W. ( 1998). “A vectorial approach to computational modelling of beams undergoing finite rotations.” Int. J. Numer. Methods in Engrg., 41, 527–540.
22.
Saleeb, A. F., Chang, T. Y. P., and Gendy, A. S. ( 1992). “Effective modeling of spatial buckling of beam assemblages, accounting for warping constraints and rotation-dependency of moments.” Int. J. Numer. Methods in Engrg., 33, 469–502.
23.
Shi, G., and Atluri, S. N. ( 1988). “Elasto-plastic large deformation analysis of space frames: A plastic hinge and stress-based derivation of tangent stiffnesses.” Int. J. Numer. Methods in Engrg., 26, 589–615.
24.
Simo, J. C. ( 1992). “The (symmetric) hessian for geometrically nonlinear models in solid analysis: intrinsic definition and geometric interpretations.” Computational Methods of Appl. Mech. and Engrg., 96, 189–200.
25.
Simo, J. C., and Vu-Quoc, L. ( 1986). “A three dimensional finite strain rod model, Part II: Computational aspects.” Computational Methods of Appl. Mech. and Engrg., 58, 79–115.
26.
Teh, L. H. ( 1998). “Towards 3-D plastic-zone advanced analysis of steel frames.” PhD thesis, Dept. of Civ. Engrg., University of Sydney, Sydney, Australia.
27.
Teh, L. H., and Clarke, M. J. (1997). “New definition of conservative internal moments in space frames.”J. Engrg. Mech., ASCE, 123(2), 97–106.
28.
Teh, L. H., and Clarke, M. J. ( 1998). “Co-rotational and Lagrangian formulations of elastic three-dimensional beam finite elements.” J. Constructional Steel Res., 48, 123–144.
29.
Yang, Y.-B., and McGuire, W. (1986a). “Joint rotation and geometric nonlinear analysis,”J. Struct. Engrg., ASCE, 112(4), 879–905.
30.
Yang, Y.-B., and McGuire, W. (1986b). “Stiffness matrix for geometric nonlinear analysis,”J. Struct. Engrg., ASCE, 112(4), 853–877.
Information & Authors
Information
Published In
History
Published online: Feb 1, 1999
Published in print: Feb 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.