Viscous Hardening Plasticity for Concrete in High-Rate Dynamics
Publication: Journal of Engineering Mechanics
Volume 124, Issue 9
Abstract
This paper presents a constitutive model for concrete in high-rate dynamics. The main feature outlined in this paper concerns the modeling of strength enhancement due to rate effects at the macrolevel of material description. It is accounted for in the constitutive modeling of strain and stresses within the theory of elastoplasticity by extending the classical plastic model to viscous hardening plasticity. Rate effects are associated with a viscous phenomenon occurring within the pores of concrete. The model is worked out in a thermodynamic framework which allows to account for couplings between viscous and plastic evolutions. The determination of the material parameters associated with the viscous phenomenon is achieved by using available data from dynamic direct tensile tests. By way of example, the three-parameter Willam-Warnke plasticity criterion is adapted to account for isotropic viscous hardening. Finally, some applications are shown to illustrate the capabilities of the model to capture the basic features of concrete behavior in high-rate dynamics, with a minimum of material parameters of clear physical significance and accessible by existing material tests.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Coussy, O. (1995). Mechanics of porous continua. John Wiley & Sons, Inc., Chichester, England.
2.
Coussy, O., and Ulm, F.-J.(1996). “Creep and plasticity due to chemo-mechanical couplings.”Archive of Appl. Mech., 66, 523–535.
3.
Dubé, J. F. (1994). “Simplified modeling and visco-damage behavior of concrete structures. Application to seismic and dynamic loading of reinforced concrete structures,” PhD thesis, Ecole Normale Supérieure de Cachan, France (in French).
4.
Gary, G., Klépaczko, J. R., Hamelin, P., and Rossi P. (1991). “Dynamic behavior of concrete and rock.”Scientific Rep., Proj. 1.3, GRECO GEOMATERIAUX (in French).
5.
Krauthammer, T., ed. (1993). “Structural concrete slabs under impulsive loads.” Fortifikatorisk Notat 211/93, Norwegian Defence Construction Service.
6.
Lemaitre, J., and Chaboche, J. L. (1990). Mechanics of solid materials. Cambridge University Press, London.
7.
Louw, J. M., Kocj, B. C., and Tennant, D. (1994). “Direct shear strength of concrete under impact.”Proc., Struct. under Shock and Impact II, Int. Conf., Computational Mech. Publications, Southampton, U.K., 147–154.
8.
Màca, J., and Bićanić, N. (1996). “Rate dependent transient dynamic analysis of concrete structures.”Proc. EURODYN '96, 3rd Eur. Conf., A. A. Balkema, Rotterdam, The Netherlands, 489–499.
9.
Mould, J., Levine, H. S., and Tennant, D. (1994). “Evaluation of a rate-dependent three invariant softening model for concrete.”Proc., Fracture and Damage of Quasibrittle Struct., Int. Conf., E&FP Spon, and Chapman & Hall, London, U.K., 231–244.
10.
Pontiroli, C., Rouquand, A., and Canton, E. (1995). “Shock wave loading on reinforced concrete plates: Experimental results and comparisons with explicit damage model prediction.”Proc., FRAMCOS-2, Fracture Mech. of Concrete Struct., Int. Conf., Aedificatio, Frieburg, Switzerland, 1219–1228.
11.
Reinhardt, H. W., Körmeling, H. A., and Zielinski, A. J.(1986). “The split Hopkinson Bar, a versatile tool for impact testing of concrete.”Mat. and Struct., Paris, France, 19, 55–63.
12.
Rossi, P.(1991). “A physical phenomenon which can explain the mechanical behaviour of concrete under high strain rates.”Mat. and Struct., Paris, France, 24, 422–424.
13.
Sercombe, J., Toutlemonde, F., Torrenti, J.-M. (1998). “Modelling of the impact performance of containers for carrying radioactive materials.”Proc., Concrete Under Severe Conditions, Int. Conf., E&FN Spon and Chapman and Hall, London, U.K., 1665–1674.
14.
Suaris, W., and Shah, S. P.(1985). “Constitutive model for dynamic loading of concrete.”J. Engrg. Mech., ASCE, 111(3), 563–576.
15.
Toutlemonde, F. (1995). “Shock strength of concrete structures, from material behavior to structural design.”Res. Rep. Hors Série, Laboratoire Central des Ponts et Chaussées, Paris, France.
16.
Toutlemonde, F., Piermattei, E., Ulm, F.-J., and Rossi, P. (1995). “Visco-gradient damage model for concrete in high rate dynamics: A first experience.”Proc., COMPLAS 4, Int. Conf., Pineridge Press, Swansea, U.K.
17.
Vos, E., and Reinhardt, H. W.(1982). “Influence of loading rate on bond behavior of reinforcing steel and prestressing strands.”Mat. and Struct., Paris, France, 15(85), 3–10.
18.
Weerheijm, J. (1992). “Concrete under impact tensile loading and lateral compression,” Doctoral thesis, Delft Univ. of Technology, Delft, The Netherlands.
19.
Willam, K. J., and Warnke, E. P. (1973). “Constitutive model for the triaxial behavior of concrete.”Proc., 19th Int. Assn. of Bridges and Struct. Engrs., Bergamo, Italy.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Sep 1, 1998
Published in print: Sep 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.