Optically Powered Electrical Accelerometer and Its Field Testing
Publication: Journal of Engineering Mechanics
Volume 124, Issue 5
Abstract
This paper introduces an optically powered electrical accelerometer recently developed by the author for measuring dynamic response of civil structures and describes a field test using its prototypes installed on a 310-m tall concrete TV tower, together with the results of system identification analysis based on the field measurement. This sensor employs an electric circuit, LC oscillator, in the sensor head. The resonant frequency of the LC oscillator is modulated by the movement of a pendulum installed inside the sensor head, indicating the acceleration of the pendulum support. The oscillatory electric voltage is transformed to an optical signal and transmitted through an optical fiber. The LC circuit is optically powered as well. Therefore, there are no electrical cables involved in this sensor, which brings many advantages to the sensor, such as immunity to an electromagnetic field and significantly less troublesome cabling problems. Prototype accelerometers were fabricated and installed on the TV tower to measure its ambient vibration. Based on the measurements, dynamic characteristics of this tower, including the natural frequencies, damping ratios, and mode shapes, were successfully identified. They are essential for the assessment of the dynamic response of the tower under wind and earthquake loads. This field test has not only provided valuable information of the tower's dynamic characteristics, but also demonstrated the excellent performance and great potential of this optically powered sensor for civil structure applications.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ansari, F. (ed.) (1993). Applications of fiber optic sensors in engineering mechanics. ASCE, Reston, Va.
2.
Bao, Z. W., and Ko, J. M. (1991). “Determination of modal parameters of tall buildings with ambient vibration measurements.”Int. J. of Analytical and Experimental Modal Analysis, 6(1).
3.
Claus, R. O., Gunther, M. F., Wang, A., and Murphy, K. A.(1992). “Extrinsic Fabry-Perot sensor for strain and crack opening displacement measurements from −200 to 900°C.”Smart Materials and Structures, 1, 237–242.
4.
Edwins, D. J. (1984). Modal testing: theory and practice. Research Studies Press.
5.
Feng, M. Q. (1996). “An experimental study of an electro-optical displacement sensor.”Nondestractive Testing and Evaluation, Vol. 13, 5–14.
6.
Feng, M. Q., and Kim, J. M. (1996). “Identification of dynamic characteristics of Nanjing TV tower for design of active control system.”Report to NSF.
7.
Fuhr, P. L., Huston, D. R., Kajenski, P. J., and Ambrose, T. P. (1992). “Performance and health monitoring of the Stafford Medical Building using embedded sensors.”Smart Materials and Structures, Vol. 1, 63–68.
8.
Fuhr, P., and Huston, D. R. (1993). “Intelligent civil structures efforts in Vermont—An overview.”Smart Structures and Materials, 412–427.
9.
Gavin, H., Susan, S., Grossman, J., Pekelis, E., and Jacob, K. (1992). “Low-level dynamic characteristics of four tall flat-plate buildings in New York City.”NCEER Technical Report, NCEER-92-0034.
10.
Ghanem, R., and Shinozuka, M., “Structural system identification: Theory.” (1995). J. Engrg. Mech., ASCE, 121(2), 255–264.
11.
Huston, D. R., Fuhr, P. L., and Beliveau, J. G. (1992). “Bridge monitoring with fiber optic sensors.”Proc. 8th U.S.–Japan Bridge Engineering Symposium, Chicago, Ill.
12.
Ibrahim, S. R.(1977). “Random decrement technique for modal identification of structures.”J. Spacecraft and Rocket, AIAA, 14(11), 696–700.
13.
Kersey, A. D., Berkoff, T. A., and Morey, W. W.(1993). “Multiplexed fiber Bragg grading strain-sensor system with a fiber Fabry-Perot wavelength filter.”Optics Letters, 18(16), 1370–1372.
14.
Kersey, A. D. (1994). “Role of fiber optic sensors in intelligent infrastructure systems.”Proc. First World Conf. on Structural Control, Los Angeles, Calif.
15.
Masri, S. F., Agbabian, M. S., Abdel-Ghaffar, A. M., Higazy, M., Claus, R. O., and Vries, M. J.(1994). “Experimental study of embedded fiber-optic strain gauges in concrete structures.”J. Engrg. Mech., 120(8), 1696–1717.
16.
Newland, D. E. (1975). Random vibrations and spectral analysis. Longmans Press.
17.
Shinozuka, M., and Ghanem, R.(1995). “Structural system identification: Experimental verification.”J. Engrg. Mech., ASCE, 121(2), 265–273.
18.
Tang, J. X., Li, L., and Wu, C. Y. (1995). “Report on field measurement of Nanjing TV tower.” (in Chinese).
19.
Vries, M. d., Murphy, K. A., Poland, S., Arya, V., Claus, R. O., and Masri, S. F. (1994). “Optical fiber sensor for civil structure applications: A comparative evaluation.”Proc. First World Conf. on Structural Control, Los Angeles, Calif.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 124 • Issue 5 • May 1998
Pages: 513 - 519
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: May 1, 1998
Published in print: May 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.