Generalized Warping Torsion Formulation
Publication: Journal of Engineering Mechanics
Volume 124, Issue 3
Abstract
A general formulation for torsional-flexural analysis of beams with arbitrary cross section is presented in a general coordinate system. The theory maintains Vlasov's approach in terms of generalized strains and stresses and yields the same system of differential equations. The common hypothesis of transversely rigid cross section, which overestimates the effective flexural and torsional section stiffness, is replaced by the assumption that stresses in the plane of the cross section are small. The resulting theory reduces to the exact solution of Timoshenko when warping effects are neglected. Shear stresses due to shear forces, warping torsion, and Saint-Venant torsion are determined as the gradient components of a unique potential function. These equations are solved with the finite element method, which also provides the flexural and torsional section stiffness and the shear center. Numerical examples are presented and results are compared with full three-dimensional finite element analyses. The formulation is simple and, in spite of the limitations of the simplifying hypotheses, sufficiently accurate for many engineering applications, bypassing costly three-dimensional finite element analyses.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Boresi, A. P., and Lynn, P. P. (1974). Elasticity in engineering mechanics. Prentice-Hall, Inc., Englewood Cliffs, N.J.
2.
Gjelsvik, A. (1981). The theory of thin walled bars. John Wiley & Sons, Inc., New York, N.Y.
3.
Herrmann, L. R.(1965). “Elastic torsional analysis of irregular shapes.”J. Engrg. Mech., ASCE, 91(6), 11–19.
4.
Kollbrunner, C. F., and Basler, K. (1969). Torsion in structures: An engineering approach. Springer-Velag, Berlin.
5.
Koo, K. K., and Cheung, Y. K.(1989). “Mixed variational formulation for thin-walled beams with shear lag.”J. Engrg. Mech., ASCE, 115(10), 2271–2286.
6.
Mason, W. E. Jr., and Herrmann, L. R.(1968). “Elastic shear analysis of general prismatic beams.”J. Engrg. Mech., ASCE, 94(4), 965–983.
7.
Nowinski, J.(1959). “Theory of thin walled bars.”Appl. Mech. Rev., 12(4), 219–227.
8.
Prokic, A.(1996). “New warping function for thin-walled beams.”J. Struct. Engrg., ASCE, 122(12), 1437–1442.
9.
Reissner, E. (1979). “Some considerations on the problem of torsion and flexure of prismatical beams.”Inst. J. Solids and Struct., (15)5, 385–392.
10.
Reissner, E. (1983). “Further considerations on the problem of torsion and flexure of prismatical beams.”Int. J. Solids and Struct., (19)5, 385–392.
11.
Reissner, E. (1992). “A note on the problem of flexure of prismatical beams.”Int. J. Solids and Struct., (30)4, 455–462.
12.
Timoshenko, S. (1934). Theory of elasticity. McGraw-Hill Book Co., Inc., New York, N.Y.
13.
Umansky, A. A. (1939). Bending and torsion of thin walled aircraft structures. Oborongiz, Moscow (in Russian).
14.
Vlasov, V. Z. (1961). Thin-walled elastic beams. Israel Program for Scientific Translations Ltd., Jerusalem.
15.
Zienkiewicz, O. C., and Taylor, R. L. (1989). The finite element method, Vol. 1, McGraw-Hill, London.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Mar 1, 1998
Published in print: Mar 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.