Calculation of Elastodynamic Energy Parameter for Plane Crack Prior to Kinking
Publication: Journal of Engineering Mechanics
Volume 124, Issue 3
Abstract
A numerical procedure, incorporated with the finite element solutions, is developed to evaluate the Jk-integrals associated with crack kinking for a stationary crack in two-dimensional anisotropic elastic solids under dynamic loading conditions. In this paper, the formulation is shown analytically to be corresponding with the dynamic energy parameter and is clearly applied as a fracture criterion just before kinking takes place. The approach is verified to be path-independent in a modified sense. Special attention is also addressed to the simulation for the portions of integration around the near-tip region so that accurate solution is achieved without using any particular singular element. With the maximum energy release criterion, the predicted kink angle extracted from the transient numerical fields under steady loading condition is found to be inherently invariant, associated with each peak value of the energy parameter, and appears to be very close to that in the static case.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Azhdari, A., and Nemat-Nasser, S.(1996). “Energy-release rate and crack kinking in anisotropic brittle solids.”J. Mech. Phys. Solids, 44(6), 929–951.
2.
Chang, J. H., and Pu, L. P.(1996a). “Finite element calculation of energy release rate prior to crack kinking in 2-D solids.”Int. J. Numer. Methods in Engrg., 39, 3033–3046.
3.
Chang, J. H., and Pu, L. P.(1996b). “A finite element approach for J2 calculation in anisotropic materials.”Comp. Struct., 62(4), 635–641.
4.
Dominguez, J., and Gallego, R.(1992). “Time domain boundary element method for dynamic stress intensity factor computations.”Int. J. Numer. Methods in Engrg., 33(3), 635–647.
5.
Eischen, J. W.(1987). “An improved method for computing the J2 integral.”Engrg. Fract. Mech., 26(5), 691–700.
6.
Eshelby, J. D. (1956). “The continuum theory of lattice defects.”Solid state physics, Vol. 3, Academic Press, Inc., San Diego, Calif.
7.
Hellen, T. K., and Blackburn, W. S.(1975). “The calculation of stress intensity factors for combined tensile and shear loading.”Int. J. Fract., 11, 605–617.
8.
Herrmann, A. G., and Herrmann, G.(1981). “On energy release rates for a plane crack.”J. Appl. Mech., 48, 525–528.
9.
Knowles, J. K., and Sternberg, E.(1972). “On a class of conservation laws in linearized and finite elastostatics.”Arch. Ration. Mech. Anal., 44, 187–211.
10.
Obata, M., Nemat-Nasser, S., and Goto, Y.(1989). “Branched cracks in anisotropic elastic solids.”J. Appl. Mech., 56, 858–864.
11.
Rice, J. R.(1968). “Mathematical analysis in the mechanics of fracture.”Fracture, 2, 191–213.
12.
Wu, C. H.(1978). “Fracture under combined loads by maximum-energy-release-rate criterion.”J. Appl. Mech., 45, 553–558.
13.
Xu, X. P., and Needleman, A.(1995). “Numerical simulations of dynamic interfacial crack growth allowing for crack growth away from the bond line.”Int. J. Fract., 74, 253–275.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Mar 1, 1998
Published in print: Mar 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.