Effects of Poisson's Ratio on Impact-Echo Test Analysis
Publication: Journal of Engineering Mechanics
Volume 123, Issue 8
Abstract
Although the Poisson's ratio of concrete is known to vary within a significant range of values, the resulting effects on impact-echo test results have not been studied. In this regard, background to the problem is given followed by an introduction to the impact-echo test technique. An exact analysis model for impact-echo data, guided-wave analysis (GWA), based on elastic guided wave-propagation theory is introduced and experimentally demonstrated to be a powerful alternative to the existing impact-echo analysis model (IEM). It is shown that the IEM model cannot account for changing values of the material Poisson's ratio, whereas the new GWA model can. Relationships among the Poisson's ratio, shear-wave velocity, and longitudinal-wave velocity of a material and the associated impact-echo test results are developed through the use of the GWA model. This development involves a parametric investigation of predicted impact-echo test results for solidand hollow-rod structures. The significant effect of Poisson's ratio as well as longitudinaland shear-wave velocity on such impact-echo results is demonstrated, and directions for future work are suggested. Conclusions concerning the validity of the GWA and IEM models and the significance of IEM analysis errors, owing to the disregard of Poisson's ratio as a significant factor, are given.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Anson, M., and Newman, K.(1966). “The effect of mix proportions and method of testing on Poisson's ratio for mortars and concretes.”Mag. Concrete Res., 18(56), 115–130.
2.
ASTM. (1990). Annual book of ASTM standards; vol. 04.02: concrete and aggregates, West Conshohocken, Pa.
3.
Flax, L., Gaunaurd, G. C., and Überall, H. (1981). “Theory of resonance scattering.”Physical acoustics—principles and methods, W. P. Mason, ed., Academic Press, New York, N. Y., Vol. XV, 191–199.
4.
Fung, Y. C. (1965). Foundations of solid mechanics. Prentice-Hall, Inc., Englewood Cliffs, N.J.
5.
Klieger, P.(1957). “Long-time study of cement performance in concrete: chapter 10—progress report on strength and elastic properties of concrete.”J. Am. Concrete Inst., 29(6), 481–503.
6.
Lin, Y., and Sansalone, M. (1991). “Impact response of bars, with applications to concrete beams, columns, and shafts.”Rep. No. 91-3, Cornell Univ., Ithaca, N.Y.
7.
Lin, Y., and Sansalone, M.(1992a). “Transient response of thick circular and square bars subjected to transverse elastic impact.”J. Acoustical Soc. of Am., 91(2), 885–893.
8.
Lin, Y., and Sansalone, M.(1992b). “Detecting flaws in concrete beams and columns using the impact-echo method.”Am. Concrete Inst. Mat. J., 89(4), 394–405.
9.
Lin, J., and Sansalone, M.(1993). “The transverse elastic impact response of thick hollow cylinders.”J. Nondestructive Evaluation, 12(2), 139–149.
10.
Meeker, T. R., and Meitzler, A. H. (1964). “Guided wave propagation in elongated cylinders and plates.”Phys. Acoustics, W. P. Mason, ed., Academic Press, New York, N.Y., Vol. I, 111–167.
11.
Philleo, R. E.(1965). “Comparison of results of three methods for determining Young's modulus of elasticity of concrete.”J. Am. Concrete Inst., 26, 461–469.
12.
Popovics, J. S. (1994). “Some theoretical and experimental aspects of the use of guided waves for the nondestructive evaluation of concrete,” PhD dissertation, The Pennsylvania State Univ., University Park, Pa.
13.
Popovics, J. S., and Rose, J. L.(1996). “An approach for wave velocity measurement in solid cylindrical rods subjected to elastic impact.”The Int. J. Solids and Struct., 33(26), 3925–3935.
14.
Sansalone, M., and Carino, N. J. (1986). “Impact-echo: a method for flaw detection in concrete using transient stress waves.”NBSIR Rep. No. 86-3452, U.S. Dept. of Commerce, National Bureau of Standards, Gaithersburg, Md.
15.
Swami, R. N.(1971). “Dynamic Poisson's ratio of portland cement paste, mortar, and concrete.”Cement and Concrete Res., 1, 559–583.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Aug 1, 1997
Published in print: Aug 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.