Nonlinear Control of Structures in Earthquakes
Publication: Journal of Engineering Mechanics
Volume 123, Issue 10
Abstract
The objectives of control of structures in earthquakes are to prevent injury to occupants and damage to contents and to protect the integrity of the structure. Both objectives can be achieved through base isolation and feedback control, whereby the structure is stabilized relative to the inertial space. Nonlinear on-off control with a dead zone in conjunction with direct feedback has the advantages of economy and simplicity of implementation. Indeed, the actuators operate only when the velocity exceeds certain threshold values and only in response to sensor signals at the same location. An example using two actuators, one on the base and the other at the top of the structure, shows very good performance of the control design.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bhatti, M. A., Pister, K. S., and Polak, E. (1979). “Optimization of control devices in base isolation system for aseismic design.”Structural control, H. H. E. Leipholz, ed., North-Holland Publishing Co., Amsterdam, The Netherlands, 127–138.
2.
Feng, M. Q.(1993). “Application of hybrid sliding isolation system to buildings.”J. Engrg. Mech., 119(10), 2090–2108.
3.
Feng, M. Q., Shinozuka, M., and Fujii, S.(1993). “Friction-controllable sliding isolation system.”J. Engrg. Mech., ASCE, 119(9), 1845–1864.
4.
Fur, L.-S., Yang, H. T. Y., and Ankireddi, S.(1994). “Vibration control of tall buildings under seismic and wind loads.”J. Struct. Engrg., ASCE, 122(8), 948–957.
5.
Jalihal, P., Utku, S., and Wada, B. K. (1994). “Active base isolation in buildings subjected to earthquake excitation.”Proc., 1994 Int. Mech. Engrg. Congr. and Exposition, 381–388.
6.
Kelly, J. M. (1979). “Control devices for earthquake-resistant structural design.”Structural control, H. H. E. Leipholz, ed., North-Holland Publishing Co., Amsterdam, The Netherlands, 391–413.
7.
Kelly, J. M., Leitmann, G., and Soldatos, A. G.(1987). “Robust control of base-isolated structures under earthquake excitation.”J. Optimization Theory and Applications, 53(2), 159–180.
8.
Loh, C.-H., and Chao, C.-H.(1996). “Effectiveness of active tuned mass damper and seismic isolation on vibration control of multi-storey building.”J. of Sound and Vibration, 193(4), 773–792.
9.
Luco, J. E., Wong, H. L., and Mita, A.(1992). “Active control of the seismic response of structures by combined use of base isolation and absorbing boundaries.”Earthquake Engrg. and Struct. Dynamics, 21(6), 525–541.
10.
Meirovitch, L. (1990). Dynamics and control of structures. Wiley-Interscience, New York, N.Y.
11.
Meirovitch, L. (1997). Principles and techniques of vibrations. Prentice-Hall, Inc., Englewood Cliffs, N.J.
12.
Pu, J.-P., and Kelly, M.(1991). “Active control and seismic isolation.”J. Engrg. Mech., ASCE, 117(10), 2221–2236.
13.
Reinhorn, A. M., Soong, T. T., and Wen, C. Y. (1987). “Base isolated structures with active control.”Recent advances in design, analysis, testing and qualification methods. ASME PVP 127, 413–419.
14.
Rofooei, F. R., and Tadjbakksh, I. G.(1993). “Optimal control of structures with acceleration, velocity, and displacement feedback.”J. Engrg. Mech., ASCE, 119(10), 1993–2010.
15.
Sener, M., and Utku, S. (1995). “Active-passive base isolation system for seismic response controlled structures.”Proc., 36th AIAA/ASME/ASCE/AHS/ASC Struct., Struct. Dyn., and Mat. Conf. and AIAA/ASME Adaptive Struct. Forum, Part 4 (of 5), 2350–2359.
16.
Yang, J. N., Danielians, A., and Liu, S. C.(1991). “Aseismic hybrid control systems for building structures.”J. Engrg. Mech., ASCE, 117(4), 836–853.
17.
Yang, J. N., Li, Z., Danielians, A., and Liu, S. C.(1992a). “Aseismic hybrid control of nonlinear and hysteretic structures, I.”J. Engrg. Mech., ASCE, 118(7), 1423–1440.
18.
Yang, J. N., Li, Z., Danielians, A., and Liu, S. C.(1992b). “Aseismic hybrid control of nonlinear and hysteretic structures, I.”J. Engrg. Mech., ASCE, 118(7), 1441–1456.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 123 • Issue 10 • October 1997
Pages: 1090 - 1095
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Oct 1, 1997
Published in print: Oct 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.