Study of Tertiary Creep of Rock Salt
Publication: Journal of Engineering Mechanics
Volume 123, Issue 1
Abstract
It appears from macroand microexperiments that the essential response feature beyond the secondary stage of rock salt creep is characterized by the evolution of localized damage that results in the formation and propagation of macrocracks. To predict the creep response of rock salt, a modeling framework with a corresponding integration scheme is developed based on thermodynamic restrictions. The jump forms of conservation laws are used to identify the transition from continuous to discontinuous failure modes. To obtain a continuum tangent stiffness tensor for bifurcation analyses, a simple creep model is formulated from the modeling framework by combining a viscoplastic part with an implicitly rate-dependent damage part. Sample problems are considered to illustrate the proposed procedure.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Chan, K. S., Bodner, S. R., Fossum, A. F., and Munson, D. E.(1992). “A constitutive model for inelastic flow and damage evolution in solids under triaxial compression.”Mech. of Mat., 14(1), 1–14.
2.
Chen, Z. (1993). “A partitioned-solution method with moving boundaries for nonlocal plasticity.”Modern approaches to plasticity, D. Kolymbas, ed., Elsevier Applied Science, New York, N.Y., 449–468.
3.
Chen, Z.(1996). “Continuous and discontinuous failure modes.”J. Engrg. Mech., ASCE, 122(1), 80–82.
4.
Chen, Z., and Clark, T. (1991). “A comparison of nonlocal investigations in solids and fluids: an introduction.”Engrg. Sci. Preprints, Vol. 28, ESP28.91036.
5.
Chen, Z., and Clark, T.(1995). “Some remarks on domain-transition problems.”Archives of Mech., 47(3), 499–512.
6.
Chen, Z., and Schreyer, H. L.(1994). “On nonlocal damage models for interface problems.”Int. J. Solids and Struct., 31(9), 1241–1261.
7.
Chen, Z., and Sulsky, D.(1995). “A partitioned-modeling approach with moving jump conditions for localization.”Int. J. Solids and Struct., 32(13), 1893–1905.
8.
Chen, Z., and Wang, M. L. (1993). “A microand macro-mechanical modeling of creep mechanisms for the WIPP rock salt.”Proc., 3rd Annu. WERC Technol. Devel. Conf., New Mexico Waste-Mgmt. Educ. and Res. Consortium (WERC), Las Cruces, N.M., 23–33.
9.
Chen, Z., Wang, M. L., Miao, S., and Lu, T. (1994). “Study of rock salt creep via a viewpoint of phase-transition.”Proc., 4th Annu. WERC Technol. Devel. Conf., New Mexico Waste-Mgmt. Educ. and Res. Consortium (WERC), DOE/WERC, Las Cruces, N.M., 181–190.
10.
Fossum, A. F., Brodsky, N. S., Chan, K. S., and Munson, D. E.(1993). “Experimental evaluation of a constitutive model for inelastic flow and damage evolution in solids subjected to triaxial compression.”Int. J. Rock Mech. Min. Sci. and Geomech. Abstracts, 30(7), 1341–1344.
11.
Grady, D. E. (1994). “Dynamic failure of brittle solids.”Fracture and damage in quasibrittle structures: experiment, modeling and computer analysis, Z. P. Bazant, Z. Bittnar, M. Jirasek, and J. Mazars, eds., E & FN Spon, New York, N.Y., 259–272.
12.
Haupt, M.(1991). “A constitutive law for rock salt based on creep and relaxation test.”Rock Mech. and Rock Engrs., 24, 179–206.
13.
Ju, J. W.(1990). “Consistent tangent moduli for a class of viscoplasticity.”J. Engrg. Mech., ASCE, 116(8), 1764–1779.
14.
Neilsen, M. K., and Schreyer, H. L.(1993). “Bifurcations in elastic-plastic materials.”Int. J. Solids and Struct., 30(4), 521–544.
15.
Willam, K., Etse, G., and Munz, T. (1993). “Localized failure in elastic-viscoplastic materials.”Creep and shrinkage of concrete, Z. P. Bazant and I. Carol, eds., E & FN Spon, New York, N.Y., 327–344.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Jan 1, 1997
Published in print: Jan 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.