3D Solutions for Free Vibration of Initially Stressed Thermoelectroelastic Multilayered Cylinders
Publication: Journal of Engineering Mechanics
Volume 123, Issue 1
Abstract
Analytic three-dimensional solutions are presented for the free vibration problems of initially stressed hybrid multilayered composite circular cylindrical shells. The shells consist of a combination of fiber-reinforced cross-ply and piezothermoelastic layers. The initial stresses are generated by either a temperature change and/or an electric field. Sensitivity coefficients are also evaluated and used to study the sensitivity of the vibrational response to variations in the different mechanical, thermal and piezoelectric material properties of the shells. Both the temperature change and the radial component of the electric field are assumed to have uniform distribution in each layer of the shells. A linear constitutive model is used, and the material properties are assumed to be independent of both the temperature and the electric field. The thermoelectroelastic response of the shell is subjected to time-varying displacements, strains, and stresses, and the free vibration response is studied. A mixed formulation is used with the fundamental unknowns consisting of the increments of the three transverse stress components and the three displacement components of the shell. Each of the fundamental unknowns is expressed in terms of a double Fourier series in the axial and circumferential surface coordinates. A state space approach is used to generate the vibrational response and to evaluate the sensitivity coefficients. A sublayer method is used for evaluating vibration frequencies and their sensitivity coefficients. Numerical results are presented showing the effects of variation in the shell thickness, and the location of the piezothermoelastic layers on the vibration frequencies and their sensitivity coefficients.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bailey, T., and Hubbard, J. E.(1985). “Distributed piezoelectric-polymer active vibration control of a cantilever beam.”J. Guidance, Dyn., and Control, 8(6), 605–611.
2.
Boresi, A. P., and Chong, K. P. (1987). Elasticity in engineering mechanics. Elsevier Applied Science, New York, N.Y.
3.
Burton, W. S., and Noor, A. K.(1994). “Three-dimensional solutions for thermomechanical stresses in sandwich panels and shells.”J. Engrg. Mech., 120(10), 2044–2071.
4.
Chandrashekhara, K., and Kolli, M. (1995). “Thermally induced vibration of adaptive doubly curved composite shells with piezoelectric devices.”Proc., 36th AIAA/ASME/ASCE/AHS/ASC SDM Conf., 1628–1636.
5.
Crawley, E., and de Luis, J.(1987). “Use of piezoelectric actuators as element of intelligent structures.”AIAA J., 25(7), 1373–1385.
6.
Fan, J., and Zhang, J.(1992). “Analytical solutions for thick, doubly curved, laminated shells.”J. Engrg. Mech., 118(6), 1338–1356.
7.
Grintchenko, V. T., Ulitko, A. F., and Schulza, N. A. (1989). “Electroelasticity (Vol. 5).”Mechanics of coupled fields in structural elements, A. N. Guz, ed., Naukova Dumka, Kiev, Ukraine (in Russian).
8.
Huang, N. N., and Tauchert, T. R.(1991). “Thermoelastic solution for cross-ply cylindrical panels.”J. Thermal Stresses, 14, 227–237.
9.
Huang, N. N., and Tauchert, T. R.(1992). “Thermoelastic stresses in doubly-curved cross-ply laminates.”Int. J. Solids and Struct., 28, 991–1000.
10.
Lee, C. K., and Moon, F. C.(1989). “Laminated piezopolymer plates for torsion and bending sensors and actuators.”J. Acoustic Society of Am., 85(8), 2432–2439.
11.
Leissa, A. W. (1973). “Vibration of shells.”NASA SP-288, Nat. Aeronautics and Space Admin., Washington, D.C.
12.
Noor, A. K., Peters, J. M., and Burton, W. S.(1994). “Three-dimensional solutions for initially stressed structural sandwiches.”J. Engrg. Mech., 120(1), 284–303.
13.
Nowacki, W. (1975). Dynamic problems of thermoelasticity. Noordhoff International Publishing, Leyden, The Netherlands.
14.
Padovan, J. (1986). “Anisotropic thermal stress analysis.”Thermal stresses I, R. B. Hetnarski, ed., Elsevier Science Publishers BV (North-Holland), Amsterdam, The Netherlands, 143–263.
15.
Ren, J. G.(1989). “Analysis of simply-supported laminated circular cylindrical shell roofs.”Compos. Struct., 11(2), 277–292.
16.
Rogacheva, N. N. (1994). The theory of piezoelectric shells and plates. CRC Press, Inc., Boca Raton, Fla.
17.
Srinivas, S. (1974). “Analysis of laminated, composite, circular cylindrical shells with general boundary conditions.”NASA TR-R-412, NASA, Washington, D.C.
18.
Tzou, H. S.(1992). “A new distributed sensor and actuator theory for “intelligent” shell.”J. Sound and Vibration, 153(2), 335–349.
19.
Washizu, K. (1982). Variational methods in elasticity and plasticity. Pergamon Press, Inc., Tarrytown, N.Y.
20.
Xu, K., and Noor, A. K.(1996). “Three-dimensional analytical solutions for coupled thermoelectroelastic response of multilayered cylindrical shells.”AIAA J., 34(4), 802–812.
21.
Zhou, S., Liang, C., and Rogers, C. A. (1993). “Impedance modeling of two-dimensional piezoelectric actuators bounded on a cylinder.”Adaptive structures and material systems, Vol. 35, 247–255.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Jan 1, 1997
Published in print: Jan 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.