Parameter Models for Estimating In-Situ Tensile Force in Tie-Rods
Publication: Journal of Engineering Mechanics
Volume 122, Issue 9
Abstract
Two analytical models are presented for the identification of the actual static scheme and tensile force of metallic tie-rods included in masonry arches and vaults. The reference structural system consists of a moment-resistant tie-beam with elastic rotational springs at the extremities. Symmetrical restraint conditions are initially hypothesized, thus obtaining a two-parameter model in which the unknowns are the springs' rigidity along with the axial force. The preceding assumption is then removed by defining a more general, three-parameter model in which two different spring rigidities are considered. The mutual experimental data are the middle-section vertical displacement under a concentrated load and the fundamental vibration frequency; the second vibration frequency is adjunctively assumed for the three-parameter model. Closed-form equations are formulated in both cases. Laboratory tests show a notable agreement between analytical estimates and experimental measures. A statistical balance of the application of the proposed models to over 200 rods belonging to several Italian monumental as well as common ancient buildings is presented along with more-detailed information about a significant case study.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Blasi, C., and Sorace, S.(1994). “Determining the axial force in metallic rods.”Struct. Engrg. Int., 4(4), 241–246.
2.
Newmark, N. M.(1949). “A simple approximate formula for effective end-fixity of columns.”J. Aeronautical Sci., 16(2), 116.
3.
Newmark, N. M., and Veletsos, A. S.(1952). “A simple approximation for the natural frequencies of partly restrained bars.”J. Appl. Mech., 19(9), 563.
4.
Pozzati, P. (1977). Teoria e tecnica delle strutture . Unione Tipografico Editrice Torinese (UTET), Turin, Italy, Vol. 2*, Chapt. VII, (in Italian).
5.
Sorace, S. (1994). “Restauro strutturale di costruzioni di interesse storico-artistico: problemi e strategie di diagnosi, analisi ed intervento (structural refurbishment of historical and monumental buildings: problems and strategies concerning the diagnosis, analysis, and intervention phases).”Bollettino Ingegneri, Florence, Italy, XLI(11), 13–22 (in Italian).
6.
Stokey, W. F. (1988). “Chapter 7: vibrations of systems having distributed mass and elasticity.”Shock and vibration handbook, C. M. Harris, ed., McGraw-Hill, Inc., New York, N.Y.
7.
Timoshenko, S. (1955). Vibration problems in engineering . D. Van Nostrand, Inc., Princeton, N.Y.
8.
Tu, Y. O., and Handelman, G.(1961). “Lateral vibrations of a beam under initial linear axial stress.”Soc. Industrial Appl. Mathematics, 9(3), 445–473.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Sep 1, 1996
Published in print: Sep 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.