Optimal Polynomial Control of Seismically Excited Linear Structures
Publication: Journal of Engineering Mechanics
Volume 122, Issue 8
Abstract
In this paper, an optimal nonlinear control law that is polynomial in terms of the states of the system is proposed for limiting the peak response of seismic-excited buildings. A performance index that is quadratic in control and polynomial of an arbitrary order of the states is considered. The performance index is minimized based on the solution of the Hamilton-Jacobi-Bellman equation. The resulting controller is a summation of polynomials of different orders, i.e., linear, cubic, and quintic, among others. Gain matrices for different parts of the controller are calculated easily by solving matrix Riccati and Lyapunov equations. Extensive simulation results indicate that the new optimal polynomial controller consumes less energy in reducing the peak response quantities; however, it may use bigger peak control force than the linear controller. When the earthquake intensity exceeds the design one, the optimal polynomial controller is capable of exerting larger control forces thus achieving a higher reduction for the peak structural response. Such response adaptive properties are very desirable for the protection of the integrity of civil engineering structures because of the inherent stochastic nature of the peak ground acceleration.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Agrawal, A. K., and Yang, J. N. (1995). “Nonlinear optimal control of seismic-excited linear structures.”Proc., 10th Engrg. Mech. Conf., ASCE, New York, N.Y., 1223–1226.
2.
Anderson, B. D. O., and Moore, J. (1990). Optimal control: linear quadratic methods. Prentice-Hall International Editions, Englewood Cliffs, N.J.
3.
Bass, R. W., and Weber, R. F. (1966). “Optimal nonlinear feedback control derived from quartic and higher-order performance criteria.”Trans. on Automatic Control, IEEE, AC-11(3), 448–454.
4.
Bernstein, D. S.(1993). “Nonquadratic cost and nonlinear feedback control.”Int. J. Robust and Nonlinear Control, 3, 211–229.
5.
Dyke, S. J., Spencer, B. F., Quast, P. L., Sain, M. K., and Kaspari, D. C. (1994). “Experimental verification of acceleration feedback control strategies for MDOF structures.”2nd Int. Conf. on Computational Stochastic Mech., A. A. Balkema, Rotterdam, The Netherlands, 137–148.
6.
Housner, G. W., and Masri, S., eds. (1994). Proc., First World Conf. on Struct. Control, USC Publication, Los Angeles, Calif.
7.
Housner, G. W., Soong, T. T., and Masri, S. F. (1994). “Second generation of active structural control in civil engineering.”Proc., First World Conf. on Struct. Control, USC Publication, Los Angeles, Calif., panel 1–18.
8.
Jabbari, F., Schmitendorf, W. E., and Yang, J. N.(1995). “H-infinity control for seismic-exicted buildings with acceleration feedback.”J. Engrg. Mech., ASCE, 121(9), 994–1002.
9.
Lewis, F. L. (1986). Optimal control. John Wiley and Sons, Inc., New York, N.Y.
10.
Moylan, P. J., and Anderson, B. D. O. (1973). “Nonlinear regulator theory and an inverse optimal control problem.”Trans. on Automatic Control, IEEE, AC-18(5), 460–465.
11.
Nagarajaiah, S. M., Riley, M. A., and Reinhorn, A. M.(1993). “Hybrid control of sliding isolated bridges.”J. Engrg. Mech., ASCE, 119(11), 2317–2332.
12.
Reinhorn, A. M., Nagarajaiah, S., Riley, M. A., and Subramaniam, R. (1993). “Study of hybrid control for structural and nonstructural systems.”Proc., Int. Workshop on Struct. Control, USC Publication, Los Angeles, Calif., 405–416.
13.
Rekasius, Z. V. (1964). “Suboptimal design of intentionally nonlinear controllers.”Trans. Automatic Control, IEEE, AC-9(4), 380–386.
14.
Salehi, S. V., and Ryan, E. P. (1982). “On optimal nonlinear feedback regulation of linear plants.”Trans. Automatic Control, IEEE, AC-27(6), 1260–1264.
15.
Sandor, J., and Williamson, D. (1977). “Design of nonlinear regulators for linear plants.”Trans. Automatic Control, IEEE, AC-22(1), 47–50.
16.
Schmitendorf, W. E., Jabbari, F., and Yang, J. N.(1994). “Robust control techniques for buildings under earthquake excitations.”J. Earthquake Engrg. and Struct. Dyn., 23(5), 539–552.
17.
Soong, T. T. (1990). Active structural control: theory and practice. Longman Scientific & Technical, Harlow, Essex, England.
18.
Soong, T. T., Masri, S. F., and Housner, G. W.(1991). “An overview of active structural control under seismic loads.”Earthquake Spectra, 7, 483–505.
19.
Speyer, J. L. (1976). “A nonlinear control law for a stochastic infinite time-problem.”Trans. on Automatic Control, IEEE, AC-21(4), 560–564.
20.
Tomasula, D. P., Spencer, B. F. Jr., and Sain, M. K. (1994). “Limiting extreme structural responses using an efficient nonlinear control law.”Proc., First World Conf. on Struct. Control, USC Publication, Los Angeles, Calif., FP4-22–FP4-31.
21.
Wu, Z., Gattulli, V., Lin, R. C., and Soong, T. T. (1994). “Implementable control laws for peak response reduction.”Proc., First World Conf. on Struct. Control, USC Publication, Los Angeles, Calif., TP2-50–TP2-59.
22.
Yang, J. N., and Agrawal, A. K. (1995). “Optimal polynomial control for linear and nonlinear structures.”Tech. Rep. No. NCEER-95-0019, Nat. Ctr. for Earthquake Engrg. Res., SUNY Buffalo, Buffalo, N.Y.
23.
Yang, J. N., Wu, J. C., and Agrawal, A. K.(1995a). “Sliding mode control of nonlinear and hysteretic structures.”J. Engrg. Mech., ASCE, 121(12), 1330–1339.
24.
Yang, J. N., Wu, J. C., and Agrawal, A. K.(1995b). “Sliding mode control of seismically excited linear structures.”J. Engrg. Mech., ASCE, 121(12), 1386–1390.
25.
Yang, J. N., Wu, J. C., Agrawal, A. K., and Li, Z. (1994a). “Sliding mode control of seismic-excited linear and nonlinear civil engineering structures.”Tech. Rep. NCEER-94-0017, Nat. Ctr. for Earthquake Engrg. Res., SUNY Buffalo, Buffalo, N.Y.
26.
Yang, J. N., Wu, J. C., Kawashima, K., and Unjoh, S.(1995c). “Hybrid control of seismic-excited bridge structures.”J. Earthquake Engrg. and Struct. Dyn., 24(11), 1437–1451.
27.
Yang, J. N., Wu, J. C., and Li, Z. (1994b). “Control of seismic-excited buildings using active variable stiffness systems.”Proc., 1994 Am. Control Conf., IEEE, Piscataway, N.J., 1083–1088.
28.
Yang, J. N., Wu, J. C., Reinhorn, A. M., and Riley, M.(1996b). “Control of sliding-isolated buildings using sliding mode control.”J. Struct. Engrg., ASCE, 122(2), 83–91.
29.
Yang, J. N., Wu, J. C., Reinhorn, A. M., Riley, M., Schmitendorf, W. E., and Jabbari, F.(1996a). “Experimental verification of H-infinity and sliding mode control for seismic-excited structures.”J. Struct. Engrg., ASCE, 122(1), 69–75.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Aug 1, 1996
Published in print: Aug 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.