Bicycle-Wheel Spoke Patterns and Spoke Fatigue
Publication: Journal of Engineering Mechanics
Volume 122, Issue 8
Abstract
The radial, lateral, and tangential stiffness of spoked bicycle wheels depends upon the rim's bending inertia, torsional inertia, the spoke sizes, and the spoke geometry. The spokes of three rear bicycle wheels of different spoke patterns were instrumented with strain gauges in order to investigate the effect of the spoke pattern on the spoke strain and fatigue resistance properties of the wheels. Spoke strains due to radial loads were measured in the laboratory. Time records of the strain of a right pulling spoke were collected from each of the wheels under actual riding conditions. Analytical, numerical, laboratory, and field studies show that spoke strains due to radial loads and in service conditions are insensitive to the spoke pattern. Small variations in the spoke strains between the wheels in the road tests can be attributed to variations in the loads, but do not significantly affect the fatigue life of the wheels.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Burgoyne, C. J., and Dilmaghanian, R.(1993). “Bicycle wheel as prestressed structure.”J. Engrg. Mech., 119(3), 439–455.
2.
Fuchs, H. O., and Stephens, R. I. (1980). Metal fatigue in structures . John Wiley and Sons, Inc., New York, N.Y.
3.
Gavin, H. P. (1986). “Spoked bicycle wheels: a comparative experimental and finite element analysis of static and dynamic characteristics of bicycle wheels with variable spoking patterns,” BS thesis, Dept. of Civ. Engrg., Princeton Univ., Princeton, N.J.
4.
Hetenyi, M. I. (1956). Beams on elastic foundation . University of Michigan Press, Ann Arbor, Mich., 156–163.
5.
Leve, H. L. (1969). “Cumulative damage theories.”Metal fatigue: theory and design, A. F. Madayag, ed., John Wiley and Sons, Inc., New York, N.Y.
6.
Pippard, A. J. S., and Francis, W. E.(1931). “The stresses in a radially-spoked wire wheel under loads applied to the rim.”Philosophical Mag., 7(11), 233–285.
7.
Pippard, A. J. S., and Francis, W. E.(1932). “The stresses in a wire wheel under side loads on the rim.”Philosophical Mag., 7(14), 436–445.
8.
Pippard, A. J. S., and White, M. J.(1932). “The stresses in a wire wheel with non-radial spokes under loads applied to the rim.”Philosophical Mag., 7(14), 209–233.
9.
Pope, J. A. (1959). Metal fatigue . Chapman and Hall, London, U.K.
10.
Price, D., and Akers, A.(1985). “Stiffness characteristics of bicycle wheels.”Bike Tech, 4(3), 1–7.
11.
Rice, R. C. (1985). “Fatigue data analysis.”Metals Handbook, 9th Ed., Vol. 8, (Mechanical Testing), Am. Soc. for Metals, Metals Park, Ohio.
12.
Yen, C. S. (1969). “Interpretation of fatigue data.”Metal fatigue: theory and design, A. F. Madayag, ed., John Wiley and Sons, Inc., New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Aug 1, 1996
Published in print: Aug 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.