Microplane Model for Concrete: II: Data Delocalization and Verification
Publication: Journal of Engineering Mechanics
Volume 122, Issue 3
Abstract
The new microplane model developed in the preceding companion paper is calibrated and verified by comparison with test data. A new approximate method is proposed for data delocalization, i.e., decontamination of laboratory test data afflicted by localization of strain-softening damage and size effect. This method, applicable more generally to any type of constitutive model, is based on the series-coupling model and on the size-effect law proposed by Bažant. An effective and simplified method of material parameter identification, exploiting affinity transformations of stress-strain curves, is also given. Only five parameters need to be adjusted if a complete set of uniaxial, biaxial, and triaxial test data is available, and two of them can be determined separately in advance from the volumetric compression curve. If the data are limited, fewer parameters need to be adjusted. The parameters are formulated in such a manner that two of them represent scaling by affinity transformation. Normally only these two parameters need to be adjusted, which can be done by simple closed-form formulas. The new model allows good fit of all the basic types of uniaxial, biaxial, and triaxial test data for concrete.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Balmer, G. G. (1949). “Shearing strength of concrete under high triaxial stress—computation of Mohr's envelope as a curve.”Rep. No. SP-23, Struct. Res. Lab., Denver, Colo.
2.
Bažant, Z. P. (1976). “Instability, ductility, and size effect in strain-softening concrete.”J. Engrg. Mech. Div., ASCE, 102(2), 331–344 (disc. 103, 357–358, 775–777, 104, 501–502).
3.
Bažant, Z. P.(1984). “Size effect in blunt fracture: Concrete, rock, metal.”J. Engrg. Mech., ASCE, 110(4), 518–535.
4.
Bažant, Z. P.(1994a). “Nonlocal damage theory based on micromechanics of crack interactions.”J. Engrg. Mech., ASCE, 120(3), 593–617.
5.
Bažant, Z. P. (1994b). “Finite-strain generalization of small-strain constitutive relations and volumetric-deviatoric split.”Rep. 94-12/403f, Dept. of Civ. Engrg., Northwestern Univ., Evanston, Ill.; also Intern. J. of Solids and Structures (in press).
6.
Bažant, Z. P., Bishop, F. C., and Chang, T.-P.(1986). “Confines compression tests of cement paste and concrete up to 300 ksi.”J. Am. Concrete Inst., 33(4), 553–560.
7.
Bažant, Z. P., and Cedolin, L. (1991). Stability of structures: Elastic, inelastic, fracture and damage theories (textbook and reference volume), Oxford University Press, New York, N.Y.
8.
Bažant, Z. P., Jirásek, M., Xiang, Y., and Prat, P. C. (1994). “Microplane model with stress-strain boundaries and its identification from tests with localized damage.”Proc., Computational Modeling of Concrete Struct. (EURO-C), H. Mang, et al., eds., Pineridge Press, Swansea, Wales, 255–261.
9.
Bažant, Z. P., and Ožbolt, J.(1990). “Nonlocal microplane model for fracture, damage and size effect in structures.”J. Engrg. Mech., ASCE, 116(11), 2484–25054.
10.
Bažant, Z. P., and Ožbolt, J.(1992). “Compression failure of quasi-brittle material: Nonlocal microplane model.”J. Engrg. Mech., ASCE, 118(3), 540–556.
11.
Bažant, Z. P., Xiang, Y., and Prat, P. C.(1996). “Microplane model for concrete. I: Stress-strain boundaries and finite strain.”J. Engrg. Mech., ASCE, 122(3), 245–254.
12.
Bresler, B., and Pister, K. S.(1958). “Strength of concrete under combined stresses.”J. Am. Concrete Inst., 551(9), 321–345.
13.
Goode, C. D., and Helmy, M. A.(1967). “The strength of concrete under combined shear and direct stress.”Mag. Concrete Res., 19(59), 105–112.
14.
Green, S. J., and Swanson, S. R. (1973). “Static constitutive relations for concrete.”Rep. No. AFWL-TR-72-2, Air Force Weapons Lab., Kirtland Air Force Base, Albuquerque, N.M.
15.
Hognestad, E., Hanson, N. W., and McHenry, D.(1955). “Concrete stress distribution in ultimated strength design.”J. Am. Concrete Inst., 52(4), 455–477.
16.
Kupfer, H., Hilsdorf, H. K., and Rüsch, H.(1969). “Behavior of concrete under biaxial stresses.”J. Am. Concrete Inst., 66, 656–666.
17.
Launay, P., and Gachon, H. (1971). “Strain and ultimate strength of concrete under triaxial stress.”Proc., 1st Int. Conf. on Struct. Mech. in Reactor Technol. (SM: RT1), T. Jaeger, ed., European Communities, Brussels, Belgium.
18.
Ortiz, M.(1987). “An analytical study of the localized failure modes in concrete.”Mech. of Mat., 6, 159–174.
19.
Ožbolt, J., and Bažant, Z. P. (1994). “Numerical smeared fracture analysis: nonlocal microcrack interaction approach.”Rep., Dept. Civ. Engrg., Northwestern Univ., Evanston, Ill.; also Int. J. of Numer. Meth. in Engrg. (in press).
20.
Petersson, P. E. (1981). “Crack growth and development of fracture zones in plain concrete and similar materials.”Rep. No. TVBM 1006, Lund Inst. of Technol., Lund, Sweden.
21.
Pijaudier-Cabot, G., and Bažant, Z. P.(1987). “Nonlocal damage theory.”J. Engrg. Mech., ASCE, 113(10), 1512–1533.
22.
Sinha, B. P., Gerstle, K. H., and Tulin, L. G.(1964). “Stress-strain relations for concrete under cyclic loading.”J. Am. Concrete Inst., 62(2), 195–210.
23.
van Mier, J. G. M. (1984). “Strain-softening of concrete under multiaxial loading conditions,” PhD dissertation, De Technische Hogeschool Eindhoven, The Netherlands.
24.
van Mier, J. G. M.(1986). “Multiaxial strain-softening of concrete. Part I: fracture. Part II: load histories.”Mat. and Struct., Paris, France, 111(19), 179–200.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Mar 1, 1996
Published in print: Mar 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.