Stochastic Parallel-Brittle Networks for Modeling Materials
Publication: Journal of Engineering Mechanics
Volume 122, Issue 2
Abstract
The behavior of Voronoi-Delaunay parallel-brittle networks of truss elements as models for material behavior is studied. Means and variances of both the number of elements in a network and their length are given. The uniaxial stiffness of the networks is found equal to the element axial stiffness. The expected value of the networks' uniaxial-tensile strength is proportional to the square root of the expected number of elements and to the expected value of the strength of the elements. The toughness of the networks is proportional to the square of the expected value of element strength and to the square root of the expected number of elements. An application to pullout of an anchor is presented. Daniels systems and chain-of-bundles systems are also analyzed to provide perspective. Statistical size effects for parallel-brittle networks are quite different from those associated with weak-link systems.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bažant, Z. P., Tabbara, M. R., Kazemi, M. T., and Pijaudier-Cabot, G.(1990). “Random particle model for fracture of aggregate of fiber composites.”J. Engrg. Mech., ASCE, 116(8), 1686–1705.
2.
Burt, N. J., and Dougill, J. W.(1977). “Progressive failure in a model heterogeneous medium.”J. Engrg. Mech. Div., ASCE, 103(3), 365–376.
3.
Curtin, W. A.(1991). “Theory of mechanical properties of ceramic-matrix composites.”J. Am. Ceram. Soc., 74(11), 2837–2845.
4.
Daniels, H. E. (1945). “The statistical theory of the strength of bundles of threads. I.”Proc., Royal Soc., London, England, 183A, 405–435.
5.
Devroye, L. (1986). Non-uniform random variate generation. Springer-Verlag, New York, N.Y.
6.
Fortune, S.(1987). “A sweepline algorithm for Voronoi diagrams.”Algorithmica, 2, 153–174.
7.
Harlow, D. G., and Phoenix, S. L. (1978a). “The chain-of-bundles probability model for the strength of fibrous materials—I.”J. Composite Mater., 12, Apr., 195–214.
8.
Harlow, D. G., and Phoenix, S. L. (1978b). “The chain-of-bundles probability model for the strength of fibrous materials—II.”J. Composite Mater., 12, Jul., 314–333.
9.
Hohenbichler, M., and Rackwitz, R. (1983). “Reliability of parallel systems under imposed uniform strain.”J. Engrg. Mech., ASCE, 109(3).
10.
Joe, B.(1986). “Delaunay triangular meshes in convex polygons.”SIAM J. Sci. Stat. Comput., 7, 514–539.
11.
Joe, B.(1991). “GEOMPACK—A software package for the generation of meshes using geometric algorithms.”Adv. Engrg. Software, 13, 325–331.
12.
Kumar, S. (1992). “Computer simulation of 3D material microstructure and its application in the determination of mechanical behavior of polycrystalline materials and engineering structures,” PhD Thesis, Pennsylvania State University, at State College, Pa.
13.
Lee, D. T., and Schachter, B. J.(1980). “Two algorithms for constructing a Delaunay triangulation.”Int. J. Comput. Info. Sci., 9, 219–242.
14.
Lerch, B. A., and Saltsman, J. F. (1991). “Tensile deformation damage in SiC reinforced Ti-15V-3Cr-3Al-3Sn.”NASA TM-103620, Lewis Res. Ctr., Cleveland, Ohio, Apr.
15.
Meijering, J. L. (1953). “Interface area, edge length, and number of vertices in crystal aggregates with random nucleation.”Philips Res. Rep. 8, 217–290.
16.
Parzen, E. (1962). Stochastic processes . Holden-Day, Inc., San Francisco, Calif.
17.
Phoenix, S. L.(1993). “Statistical issues in the fracture of brittle-matrix fibrous composites.”Composites Sci. and Technol., 48, 65–80.
18.
Preparata, F. P., and Shamos, M. I. (1985). Computational Geometry . Springer-Verlag, New York, N.Y.
19.
Press, W. H., Flannery, B. P., Teukolsky, S. A., and Vetterling, W. T. (1988). Numerical recipes in C, Cambridge Univ. Press, Cambridge, U.K.
20.
Santalo, L. A. (1976). Integral geometry and geometric probability . Addison-Wesley Publishing Co., Reading, Mass.
21.
Schlangen, E., and Van Mier, J. G. M. (1992). “Micromechanical analysis of fracture of concrete.”Int. J. Damage Mech., 1, Oct., 435–454.
22.
Snyder, D. L., and Miller, M. I. (1991). “Random point processes in time and space.” Springer-Verlag, New York, N.Y.
23.
Srolovitz, D. J., and Beale, P. D.(1988). “Computer simulation of failure in an elastic model with randomly distributed defects.”J. Am. Ceram. Soc., 71(5), 362–369.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Feb 1, 1996
Published in print: Feb 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.