Fundamental Solutions for Bimaterials with Inextensible Interface
Publication: Journal of Engineering Mechanics
Volume 122, Issue 11
Abstract
Fundamental solutions are obtained in exact closed forms for elastic fields in bimaterial elastic solids with a horizontally inextensible interface and differing transversely isotropic properties induced by concentrated points and ring-force vectors. For the concentrated point-force vector, the fundamental solution is expressed in terms of elementary harmonic functions. For the concentrated ring-force vector, the fundamental solution is expressed in terms of the complete elliptic integral of the first, second, and third kinds. Numerical results are presented to illustrate the effect of anisotropic bimaterial properties on the transmission of normal contact stress and the discontinuity of shear contact stress at the horizontally inextensible interface. The closed-form solutions are systematically presented in matrix forms that can be easily implemented in numerical schemes, such as boundary-element methods to solve elastic problems in engineering mechanics.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Banerjee, P. K., and Butterfield, R. (1981). Boundary element methods in engineering science . McGraw-Hill Book Co., Inc., New York, N.Y.
2.
Dundurs, J., and Hetenyi, H.(1965). “Transmission of force between two semi-infinite solids.”J. Appl. Mech., 32, 671–674.
3.
Eason, G., Noble, B., and Sneddon, I. N. (1955). “On certain integrals of Lipschitz-Hankel type involving products of Bessel functions.”Philosophical Transaction Royal Society, London, London, England, A247, 529–551.
4.
Ejike, U. B. C.(1970). “Boundary effects due to body forces and body couples in the interior of a semi-infinite elastic solid.”Int. J. Engrg. Sci., 8, 909–924.
5.
Elliott, H. A.(1948). “Three-dimensional stress distributions in hexagonal aeolotropic crystals.”Proc., Cambridge Philosophical Soc., Cambridge, England, 44, 522–533.
6.
Hasegawa, H., and Kondou, K. (1987). “Stress analysis of an elastic half-space having an axisymmetric cavity.”Theoretical and Appl. Mech., Proc., of the 32nd Japan Nat. Congr. for Appl. Mech., Univ. of Tokyo Press, Tokyo, Japan, 339–345.
7.
Hasegawa, H., Lee, V. G., and Mura, T.(1992a). “Green's functions for axisymmetric problems of dissimilar elastic solids.”J. Appl. Mech., 59, 312–320.
8.
Hasegawa, H., Lee, V. G., and Mura, T. (1992b). “The stress fields caused by a circular cylindrical inclusion.”J. Appl. Mech., 59, S107–S114.
9.
Lin, W., and Keer, L. M. (1989). “Three-dimensional analysis of cracks in layered transversely isotropic media.”Proc., Royal Soc. of London, London, England, 307–322.
10.
Mura, T. (1982). Micromechanics of defects in solids . Martinus Nijhoff Publishers, Boston, Mass.
11.
Pan, Y. C., and Chou, T. W.(1979). “Green's functions for two-phase transversely isotropic materials.”J. Appl. Mech., 46, 551–556.
12.
Phan-Thien, N.(1983). “On the image system for the Kelvin-state.”J. Elasticity, Kluwer Academic Publishers, Amsterdam, The Netherlands, 13, 213–235.
13.
Plevako, K. P. (1969). “A point force inside a pair of cohering halfspace.”Osnovaniya Fundamenty i Mekhanika Gruntov, Moscow, Russia, No. 3, 9–11 (in Russian).
14.
Rongved, L. (1955). “Force interior to one or two joined semi-infinite solids.”Proc., Sec. Midwest, Conf. Solid Mech., Purdue Univ., Lafayette, Ind., 1–13.
15.
Selvadurai, A. P. S.(1984). “Elastostatic bounds for the stiffness of an elliptical disc inclusion embedded at a transversely isotropic bi-material interface.”J. Appl. Mathematics and Phys., ZAMP, Birkhauser Verlag, Basel, Germany, 35(1), 13–23.
16.
Selvadurai, A. P. S., and Au, M. C.(1986). “Generalized displacements of a rigid elliptical anchor embedded at a bi-material geological interface.”Int. J. Numer. and Analytical Methods in Geomech., 10, 633–652.
17.
Small, J. C., and Booker, J. R.(1986). “Finite layer analysis of layered elastic materials using a flexibility approach. Part 2—Circular and rectangular loadings.”Int. J. Numer. Methods in Engrg., 23, 959–978.
18.
Sneddon, I. N. (1972). The use of integral transform . McGraw-Hill Book Co., Inc., New York, N.Y.
19.
Vijayakumar, S., and Cormack, D. E.(1987a). “Nuclei of strain for bi-material elastic media with sliding interface.”J. Elasticity, Kluwer Academic Publishers, Amsterdam, The Netherlands, 17, 285–290.
20.
Vijayakumar, S., and Cormack, D. E.(1987b). “Green's functions for the biharmonic equation: bonded elastic media.”SIAM J. on Appl. Mathematics, 47, 982–997.
21.
Vreugdenhil, R., Davis, R., and Berrill, J.(1994). “Interpretation of cone penetration results in multilayered soils.”Int. J. Numer. and Analytical Methods in Geomech., 18, 585–599.
22.
Yang, H. Y., and Wang, M. L.(1994). “Constitutive theory of interface behaviour in quasi-brittle materials.”J. Engrg. Mech., ASCE, 120(12), 2588–2603.
23.
Yu, H. Y., and Sanday, S. C. (1991). “Elastic fields in joined half-spaces due to nuclei of strain.”Proc., Royal Soc. London, London, England, 503–519.
24.
Yue, Z. Q.(1995). “Elastic fields in two joined transversely isotropic solids due to concentrated forces.”Int. J. Engrg. Sci., 33(3), 351–369.
25.
Yue, Z. Q. (1996). “Closed-form Green's functions for transversely isotropic bi-material solids with slipping interface.”Struct. Engrg. and Mech., An Int. J., Techno-Press, Taejon, Korea, in press.
26.
Yuuki, R., Cho, S.-B., Matsumoto, T., and Kisu, H.(1987). “Efficient boundary element elastostatic analysis using Hetenyi's fundamental solution.”Transaction of Japan Soc. of Mech. Engrs., Tokyo, Japan, Series A, 53, 1581–1589.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Nov 1, 1996
Published in print: Nov 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.