Compressive Behavior of Concrete: Physical Mechanisms and Modeling
Publication: Journal of Engineering Mechanics
Volume 122, Issue 11
Abstract
This paper seeks for a better understanding of the failure mechanisms of concrete in compression and explores the possibilities of incorporating these physical mechanisms in the computational modeling of concrete behavior. In the first half, the standard compression test is revisited. It is found that failure of concrete in compression can be regarded as the sequence of a two-stage crack mechanism. First, cracks open parallel to the direction of loading, leading to the formation of small columns in the material. Second, the bending of these small columns due to both the heterogeneity of the material and the friction on the lateral edges of the small columns (friction at the lips of the vertical cracks) lead to the formation of oblique cracks (with respect to the direction of loading). The latter merge to form oblique slippage planes and result in failure. In the second half, these physical mechanisms are explored from a modeling point of view; a probabilistic numerical model is proposed that accounts for the initial heterogeneity of the material, the random creation of geometrical discontinuities (i.e., cracks), and the mechanisms of friction on the crack edges. Several numerical simulations show that this modeling captures well the physical mechanisms analyzed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Acker, P., Boulay, C., and Rossi, P.(1987). “On the importance of initial stresses in concrete and of the resulting mechanical effects.”Cement and Concrete Res., 17, 755–764.
2.
Chen, W. F. (1982). Plasticity in reinforced concrete . McGraw-Hill Book Co., Inc., New York, N.Y.
3.
Hachi, F. (1994). “Numerical modeling of concrete behavior under uniaxial compression using a probabilistic approach.”Rapport de D.E.A., Ecole Nationale des Ponts et Chaussées, Paris, France (in French).
4.
Rossi, P., and Richer, R.(1987). “Numerical modeling of concrete cracking based on a stochastic approach.”Mat. and Struct., 20, 334–337.
5.
Rossi, P. (1989). “Numerical modeling of the cracking using a non-deterministic approach.”Fracture toughness and fracture energy, Mihoshi et al., eds., Balkema, 383–394.
6.
Rossi, P., and Wu, X.(1992). “A probabilistic model for material behavior analysis and appraisement of the concrete structures.”Cement and Concrete Res., 44(161), 271–280.
7.
Rossi, P., Wu, X., Le Maou, F., and Belloc, A.(1994). “Scale effect on concrete in tension.”Mat. and Struct., 27, 437–444.
8.
Torrenti, J. M., Desrues, J., Benaija, E. H., and Boulay, C.(1991). “Stereophotogrammetry and localization in concrete under compression.”J. Engrg. Mech., ASCE, 117(7), 1455–1465.
9.
Torrenti, J. M., Benaija, E. H., and Boulay, C.(1993). “Influence of boundary conditions on strain softening in concrete compression test.”J. Engrg. Mech., ASCE, 119(12), 2369–2384.
10.
Ulm, F.-J. (1994). “A plastic degrading concrete model for static and dynamic analysis of reinforced and prestressed concrete structures,” PhD thesis, Ecole Nationale des Ponts et Chaussées, Paris, France (in French).
11.
Wittmann, F. H., Roelfstra, P. E., and Sadouki, H.(1984). “Simulation and analysis of composite structures.”Mat. Sci. Engrg., 68, 239–248.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Nov 1, 1996
Published in print: Nov 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.