Effect of Fiber Rupture on Tensile Properties of Short Fiber Composites
Publication: Journal of Engineering Mechanics
Volume 121, Issue 8
Abstract
A probabilistic-based micromechanical model has been developed for the postcracking behavior of a brittle matrix reinforced with short, randomly distributed fibers. The model that predicts the composite-bridging stress crack-opening displacement (COD) relationship, accounts for fiber pullout, fiber tensile rupture, and a local frictional effect called snubbing. However, it does not account for fiber bending rupture, and the possible effect of matrix spalling at the exit points of inclined fibers from the matrix. The model assumes a fiber/matrix interface that is controlled by a constant frictional bond stress. The model is used to predict the composite tensile strength and fracture energy. Comparisons of model-predicted bridging stress-COD relationship with experimental data, where fiber rupture has occurred, show reasonable agreement supporting the validity of the proposed model. The model is then used to perform a parametric study to evaluate the effect of the micromechanical parameters on the composite tensile strength and fracture energy. The study suggests that this model can be used to design the composite for optimum performance.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Krenchel, H., and Hansen, S. (1992). “New recipes and new production techniques for high performance FRC-materials.”Proc., Int. Workshop on High Perf. Fiber Reinforced Cement Composites, H. Reinhardt and A. Naaman, eds., Chapman & Hall, Ltd., London, England, 65–83.
2.
Li, V. C.(1992). “Postcrack scaling relations for fiber reinforced cementitious composites.”J. Mat. in Civ. Engrg., ASCE, 4(1), 41–57.
3.
Li, V. C., and Chan, Y. W.(1994). “Determination of interfacial debond mode for fiber reinforced cementitious composites.”J. Engrg. Mech., ASCE, 120(4), 707–719.
4.
Li, V. C., and Leung, K. Y.(1992). “Steady state and multiple cracking of short random fiber composites.”J. Engrg. Mech., ASCE, 118(11), 2246–2264.
5.
Li, V. C., and Wu, H. C. (1992). “Pseudo strain-hardening design in cementitious composites.”Proc., Int. Workshop on High Perf. Fiber Reinforced Cement Composites, H. Reinhardt and A. Naaman, eds., Chapman & Hall, Ltd., London, England, 371–387.
6.
Li, V. C., Chan, C. M., and Leung, C. K. Y.(1987). “Experimental determination of the tension softening relations for cementitious composites.”Cement and Concrete Res., 17(3), 441–452.
7.
Li, V. C., Wang, Y., and Backer, S.(1990). “Effect of inclining angle, bundling, and surface treatment on synthetic fiber pull-out from a cement matrix.”J. Composites, 21(2), 132–140.
8.
Li, V. C., Wang, Y., and Backer, S.(1991). “A micromechanical model of tension softening and bridging toughening of short random fiber reinforced brittle matrix composites.”J. Mech. Phys. Solids, 39(5), 607–625.
9.
Visalvanich, K., and Naaman, A. E.(1983). “Fracture model for fiber reinforced concrete.”ACI J., 80(2), 128–138.
10.
Wang, Y. (1989). “Mechanics of fiber cementitious composites,” PhD thesis, Massachusetts Inst. of Technol., Cambridge, Mass.
11.
Wang, Y., Li, V. C., and Backer, S.(1991). “Tensile failure mechanisms in synthetic fiber-reinforced mortar.”J. Mat. Sci., 26(24), 6565–6575.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Aug 1, 1995
Published in print: Aug 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.