Crack-Bridging Force in Random Ductile Fiber Brittle Matrix Composites
Publication: Journal of Engineering Mechanics
Volume 121, Issue 12
Abstract
The behavior of fiber-reinforced composites is governed by the crack-bridging force provided by the fibers, which can be obtained by the analysis of debonding and bending of fibers across a crack. In this paper, a micromechanical model for the analysis of crack-bridging force is developed. As fiber debonding has been extensively studied in the literature, the present work focuses on the component of crack-bridging force due to fiber bending, which is obtained by analyzing the bending of an elastoplastic beam on an elastic foundation with variable stiffness along the fiber. The possibility of matrix spalling below the fiber is also considered. Some of the assumptions made in the model are verified with more accurate analyses. Model prediction of the maximum crack-bridging force in metallic fiber-reinforced brittle matrix composites is found to be in reasonably good agreement with experimental results. A parametric study of the model reveals the existence of an optimal range of fiber yield strength that can provide the most desirable crack-bridging behavior.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Akihama, S., Suenaga, T., and Nakagawa, H.(1988). “Carbon fiber reinforced concrete.”Concrete Int., 10(1), 40–47.
2.
Atkinson, C., Avila, J., Betz, E., and Smelser, R. E. (1982). “The rod pull-out problem, theory and experiment.”J. Mech. Phys. Solids, 30(3), 97–120.
3.
Cai, H., Faber, K. T., and Fuller, E. R. (1992). “Crack bridging by inclined fibers/whiskers in ceramic composites,” submitted to J. Am. Ceramic Soc., 75(11), 3111–3117.
4.
Chi, J. (1992). “Micromechanical modelling of ductile fiber reinforced ceramics,” MSc thesis, Dept. of Civ. Engrg., Massachusetts Inst. of Technol. (MIT), Cambridge, Mass.
5.
Evans, A. G.(1990). “Perspective on the development of high toughness ceramics.”J. Am. Ceramic Soc., 73(2), 187–206.
6.
Gao, Y., Mai, Y. W., and Cotterell, B.(1988). “Fracture of fiber-reinforced materials.”J. ZAMP, 39(4), 550–572.
7.
Gopalaratnam, V. S., and Shah, S. P. (1985). “Tensile failure of steel fiber-reinforced mortar.”J. Engrg. Mech., ASCE, 113(5), 635– 652.
8.
Gurney, C., and Hunt, J. (1967). “Quasi-static crack propagation.”Proc., Royal Soc., A299, London, England, 508–524.
9.
Lawrence, P.(1972). “Some theoretical considerations of fiber pull-out from an elastic matrix.”J. Mat. Sci., 7(1), 1–6.
10.
Leung, C. K. Y. (1990). “Micromechanical modelling of short-fiber reinforced ceramics,” PhD thesis, Dept. of Civ. Engrg., Massachusetts Inst. of Technol. (MIT), Cambridge, Mass.
11.
Leung, C. K. Y.(1992). “A fracture-based two-way debonding model for discontinuous fibers in an elastic matrix.”J. Engrg. Mech., ASCE, 118(11), 2298–2318.
12.
Leung, C. K. Y., and Li, V. C. (1989). “First cracking strength of short fiber-reinforced ceramics.”Ceramic Engrg. Sci. Proc., 10(9–10), 1164–1178.
13.
Leung, C. K. Y., and Li, V. C.(1990). “Applications of a two-way debonding theory to short-fiber composites.”Comp., 21(4), 305–317.
14.
Leung, C. K. Y., and Li, V. C.(1991). “A new strength-based theory for the debonding of discontinuous fibers in an elastic matrix.”J. Mat. Sci., 26(11), 5996–6010.
15.
Leung, C. K. Y., and Li, V. C.(1992). “Effect of fiber inclination on crack bridging stress in brittle fiber reinforced brittle matrix composites.”J. Mech. Phys. Solids, 40(6), 1333–1362.
16.
Li, V. C., Backer, S., Wang, Y., Ward, R., and Green, E. (1989). “Toughened behaviour and mechanisms of synthetic fiber reinforced normal strength and high strength concrete.”Fiber reinforced cements and concretes: Recent developments, R. N. Swamy, and B. Barr, eds., Elsevier Applied Science, London, England, 420–433.
17.
Li, V. C., and Leung, C. K. Y.(1992). “Tensile failure modes of random discontinuous fiber reinforced brittle matrix composites.”J. Engrg. Mech., ASCE, 118(11), 2246–2264.
18.
Li, V. C., Wang, Y., and Backer, S.(1990). “Effect of inclining angle, bundling, and surface treatment on synthetic fiber pull-out from a cement matrix.”Comp., 21(2), 132–140.
19.
Li, V. C., and Wu, H. C. (1992). “Micromechanics based design for pseudo strain-hardening in cementitious composites.”Proc., 9th ASCE Conf. on Engrg. Mech., L. D. Lutes, and J. M. Niedzwecki, ASCE, New York, N.Y., 740–743.
20.
Marshall, D. B., Cox, B. N., and Evans, A. G.(1985). “The mechanics of matrix cracking in brittle-matrix fiber composites.”Acta Metallurgica, 33(11), 2013–2021.
21.
Morton, J., and Groves, G. W. (1974). “The cracking of composites consisting of discontinuous ductile fibers in a brittle matrix—effect of fiber orientation.”J. Mat. Sci., Vol. 9, 1436–1445.
22.
Naaman, A. E., Namur, G. C., Alwan, J. M., and Najm, H.(1991). “Fiber pullout and bond slip. I: Analytical study.”J. Engrg. Mech., ASCE, 117(9), 2769–2790.
23.
Piggott, M. R. (1974). “Toughness in obliquely-stressed fibrous composites.”J. Mech. Phys. Solids, Vol. 22, 457–468.
24.
Shah, S. P., and Ouyang, C. (1991). “Mechanical behavior of fiberreinforced cement-based composites.”J. Am. Ceramic Soc., 74(11), 2727–38, 2947–53.
25.
Stang, H., Li, Z., and Shah, S. P.(1990). “The pull-out problem—the stress versus fracture mechanical approach.”J. Engrg. Mech, 116(10), 2136–2150.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Dec 1, 1995
Published in print: Dec 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.