Cyclic Behavior of Structural Steels. II: Theory
Publication: Journal of Engineering Mechanics
Volume 121, Issue 11
Abstract
This paper is concerned with the analytical modeling of the cyclic behavior of structural steels. The modified uniaxial two-surface model developed by Shen et al. in 1992 is generalized to a multiaxial two-surface model, which can treat the cyclic behavior of the structural steels even within the yield plateau. The important features of the cyclic behavior observed in the uniaxial and biaxial cyclic experiments are included in the present model with the extension of the effective plastic strain (EPS) range concept into the multidimensional stress state. The experimental cyclic behavior of mild steel under nonproportional biaxial (torsion-compression) loading histories (in a companion paper) are predicted using the proposed model. It is shown that the proposed model provides a close fit to the experimental results.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Chaboche, J. L. (1989). “Constitutive equations for cyclic plasticity and cyclic viscoplasticity.”Int. J. Plasticity, Vol. 5, 247–302.
2.
Chaboche, J. L., Dang-van, K., and Cordier, G. (1979). “Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel.”Proc., 5th Int. Conf. on Struct. Mech. in Reactor Technol., Vol. L, Paper No. L11/3, Elsevier, Amsterdam, The Netherlands.
3.
Chang, K. C., and Lee, G. C.(1986). “Constitutive relations of structural steel under nonproportional loading.”J. Engrg. Mech., ASCE, 112(8), 806–820.
4.
Cofie, N. G., and Krawinkler, H.(1985). “Uniaxial cyclic stress-strain behavior of structural steel.”J. Engrg. Mech., ASCE, 111(9), 1105–1120.
5.
Dafalias, Y. F., and Popov, E. P. (1975). “A model of nonlinear hardening materials for complex loading.”Acta Mechanica, Vol. 21, 173–192.
6.
Dafalias, Y. F., and Popov, E. P. (1976). “Plastic interval variables formalism of cyclic plasticity.”J. Appl. Mech. Trans. ASME, Vol. 43, 645–651.
7.
Iwan, W. D. (1967). “On a class of model for the yielding behavior of continuous and composite system.”J. Appl. Mech. Trans. ASME, 612–617.
8.
Kreig, R. D. (1975). “A practical two surface plasticity theory.”J. Appl. Mech. Trans. ASME, Vol. 42, 641–646.
9.
Mamaghani, I. H. P., Shen, C., Mizuno, E., and Usami, T.(1995). “Cyclic behavior of structural steels. I: Experiments.”J. Engrg. Mech., ASCE, 121(11), 1158–1164.
10.
McDowell, D. L. (1985). “A two-surface model for transient nonproportional cyclic plasticity.”J. Appl. Mech. Trans. ASME, Vol. 52, 298–308.
11.
Minagawa, M., Nishiwaki, T., and Masuda, N.(1987). “Modeling cyclic plasticity of structural steels.”Struct. Engrg. Earthquake Engrg., Japan, 4(2), 361–370.
12.
Mróz, Z. (1967). “On the description of anisotropic work hardening.”J. Mech. Phys. Solids, Vol. 15, 163–175.
13.
Ohno, N. (1982). “A constitutive model of cyclic plasticity with a nonhardening strain region.”J. Appl. Mech. Trans. ASME, Vol. 49, 721–727.
14.
Ohno, N.(1990). “Recent topics in constitutive modeling of cyclic plasticity and viscoplasticity.”Appl. Mech. Rev., 43(11), 283–295.
15.
Petersson, H., and Popov, E. P.(1977). “Constitutive relation for generalized loading.”J. Engrg. Mech., ASCE, 104(4), 611–627.
16.
Shen, C., Mizuno, E., and Usami, T. (1993). “Further study on two-surface model for structural steels under cyclic loading.”J. Struct. Engrg./Earthquake Engrg., Japan, 9(4), 257s–260s.
17.
Shen, C., Tanaka, Y., Mizuno, E., and Usami, T. (1992). “A two-surface model for steels with yield plateau.”J. Struct. Engrg./Earthquake Engrg., Japan, 8(4), 179s–188s.
18.
Tseng, N. T., and Lee, G. C.(1983). “Simple plasticity model of two-surface type.”J. Engrg. Mech., ASCE, 109(3), 795–810.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Nov 1, 1995
Published in print: Nov 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.