Anisotropic Plasticity Model for Foams and Honeycombs
Publication: Journal of Engineering Mechanics
Volume 120, Issue 9
Abstract
A three‐dimensional plasticity model is developed for foams and honeycombs. The model accounts for the transverse isotropy of foams and the orthotropy of honeycombs by incorporating a shift on stress that provides a yield surface in the form of a sphere with the centroid shifted from the origin in the principal stress space. To model the extensive strains that occur at constant stress, an elastic‐perfectly plastic formulation is used until a critical plastic volumetric strain is reached. Then the initiation of lockup is represented as an isotropic hardening function of plastic volumetric strain. Both elastic and plastic constants are given as functions of the initial density of the cellular material. With lockup, the elasticity tensor transforms to that of the parent solid. To account for strain‐rate effects, the plateau stresses and the hardening parameter are taken as functions of volumetric strain rate. For each material, experimental data are given for various densities and illustrative plots are given to show how well the model represents these data.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Desai, C. S., and Siriwardone, H. J. (1984). Constitutive laws for engineering materials, with emphasis on geologic materials. Prentice Hall, Inc., Englewood Cliffs, N.J.
2.
Gibson, L. J., and Ashby, M. F. (1988). Cellular solids. Pergamon Press, Elmsford, N.Y.
3.
Gibson, L. J., Ashby, M. F., Schajer, G. S., and Robertson, C. I. (1982). “The mechanics of two‐dimensional cellular materials.” Proc., Royal Soc., A382, 25–42.
4.
Hill, R. (1950). The mathematical theory of plasticity. Oxford University Press, New York, N.Y.
5.
Klintworth, J. W., and Stronge, W. J. (1988). “Elasto‐plastic yield limits and deformation laws for transversely crushed honeycombs.” Int. J. Mech. Sci., 30(3/4), 273–292.
6.
“Sandwich construction and core materials, general test methods.” (1967). MIL‐STD‐401B, Military Standards, Department of Defense, Washington, D.C.
7.
Schellekens, J. C. J., and De Borst, R. (1990). “The use of the Hoffman yield criterion in the finite element analysis of anisotropic composites.” Comp. and Struct., 37(6), 1087–1096.
8.
Schreyer, H. L. (1983). “A third invariant plasticity theory for frictional materials.” J. Struct. Mech., 11(2), 177–196.
9.
Schreyer, H. L. (1990). “Analytical solutions for nonlinear strain‐gradient softening and localization.” J. Appl. Mech., 57(3), 522–528.
10.
Shim, V. P. W., Tay, B. Y., and Stronge, W. J. (1990). “Dynamic crushing of strain‐softening cellular structures—a one dimensional analysis.” J. Engr. Mater. and Techn., 112(4), 398–405.
11.
Standard methods for testing tensile properties of rigid cellular plastics; V 08.02, Plastics (II), D1601–D3099. (1990). ASTM, Philadelphia, Pa.
12.
Triantafillou, T. C., and Gibson, L. J. (1990). “Constitutive modeling of elastic‐plastic open‐cell foams.” J. Engr. Mech., 116(12), 2772–2778.
13.
Tsai, S. W., and Wu, E. M. (1971). “A general theory of strength of anisotropic material.” J. Comp. Materials, 5(1), 58–80.
14.
Warren, W. E., and Kraynik, A. M. (1985). “The effective elastic properties of low‐density foams.” Constitutive modeling for nontraditional materials, V. K. Stokes, and D. Krajcinovic, eds., AMD‐85, 123–145.
15.
Warren, W. E., and Kraynik, A. M. (1987). “Foam mechanics: the linear elastic response of two‐dimensional spatially periodic cellular materials.” Mech. of Mat., 6(1), 27–37.
16.
Zhang, J., and Ashby, M. F. (1992a). “Buckling of honeycombs under in‐plane biaxial stresses.” Int. J. Mech. Sci., 34(6), 491–509.
17.
Zhang, J., and Ashby, M. F. (1992b). “The out‐of‐plane properties of honeycombs.” Int. J. Mech. Sci., 34(6), 475–489.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: May 24, 1993
Published online: Sep 1, 1994
Published in print: Sep 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.