Material Model for Concrete in Cracked and Uncracked States
Publication: Journal of Engineering Mechanics
Volume 120, Issue 9
Abstract
An elastoplastic model for concrete is presented that covers the nonlinear triaxial behavior of concrete under compressive and tensile loading, compressive failure, and tensile cracking. In all the states, the model is based on the same concept. For the description of the prefailure behavior, two different hardening functions are introduced that control the expansion and the transposition of the “yield surface.” To simulate tensile cracking, a “smeared‐crack approach” is chosen. The elastoplastic concept is extended, whereas the anisotropic behavior of cracked concrete is taken into account. By introducing a new combination of isotropic expansion and kinematic transposition of the “yield surface,” steady transitions between compression and tension zones are obtained both in cracked and uncracked states. Comparisons with test results show the very good capacity of the proposed model to cover the material behavior both in the pre‐ and postfailure regions. By applying the method of finite elements, the analysis of notched beams demonstrates that the model is very well suited to predict the response of concrete structures.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Arrea, M., and Ingraffea, A. R. (1982). “Mixed‐mode crack propagation in mortar and concrete.” Rep. No. 81‐13, Dept. of Struct. Engrg., Cornell University, Ithaca, N.Y.
2.
Bažant, Z. P., and Oh, B. H. (1983). “Crack band theory for fracture of concrete.” Material and Structures, RILEM, 16(94), 155–177.
3.
Desai, C. S., Somasundaram, S., and Frantziskonis, G. (1986). “A hierarchical approach for constitutive modelling of geologic materials.” Int. J. Numerical and Analytical Methods in Geomechanics, 10(3), 225–257.
4.
Eberhardsteiner, J., Meschke, G., and Mang, H. (1987). “Triaxiales konstitutives modellieren von beton.” Rep., Institut für Festigkeitslehre, TU Vienna, Austria (in German).
5.
Fried, I. (1984). “Orthogonal trajectory accession to the nonlinear equilibrium curve.” Comp. Methods Appl. Mech. Engrg., 47, 283–297.
6.
Gambarova, G. P., and Karakoc, C. (1985). “A new approach to the analysis of the confinement role in regularly cracked concrete elements.” Int. Conf. on Struct. Mech. in Reactor Tech. Paper H 5/7, Chicago, Ill.
7.
Glemberg, R., Oldenburg, M., Nielsson, L., and Samuelsson, A. (1986). “A general constitutive model for concrete structures.” Computational modelling of reinforced concrete structures, E. Hinton, and R. Owend, eds., Pineridge Press, Swanson, Wales.
8.
Han, D. J., and Chen, W. F. (1987). “Constitutive modelling in analysis of concrete structures.” J. Engrg. Mech., ASCE, 113(4), 577–593.
9.
Kupfer, H. (1973). “Das verhalten des betons unter mehrachsiger kurzzeitbelastung unter besonderer berücksichtigung der zweiachsigen beanspruchung.” Deutscher Ausschuß für Stahlbeton, 229, Berlin, Germany (in German).
10.
Lubliner, J., Oliver, J., Oller, S., and Onate, E. (1989). “A plastic‐damage model for concrete.” Int. J. Solids Struct., 25(3), 299–326.
11.
Meyer, R. (1991). “Mehraxiales werkstoffmodell für beton mit einheitlichem konzept im vor‐ und Nachbruchbereich.” Rep. 91‐64, Institut für Statik TU Braunschweig, Braunschweig, Germany (in German).
12.
Ottosen, N. S. (1977). “A failure criterion for concrete.” J. Engrg. Mech. Div., ASCE, 103(4), 527–535.
13.
Petersson, P. E. (1981). “Crack growth and development of fracture zones in plain concrete and similar materials.” Rep. No. TVBM‐1006, Div. of Build. Mat., Univ. of Lund, Lund, Sweden.
14.
Pietruszczak, S., Jiang, J., and Mirza, F. A. (1988). “An elastoplastic constitutive model for concrete.” Int. J. Solids Struct., 27(7), 705–722.
15.
Podgorski, J. (1985). “General failure criterion for isotropic media.” J. Engrg. Mech., 111(2), 188–201.
16.
Popovics, S. (1973). “A numerical approach to the complete stress‐strain curve of concrete.” Cement and Concrete Res., 3(5), 583–599.
17.
Pramono, E., and Willam, K. (1989). “Fracture energy‐based plasticity formulation of plain concrete.” J. Engrg. Mech., 115(6), 1183–1204.
18.
Riggs, R., and Powell, G. (1986). “Rough crack model for analysis of concrete.” J. Engrg. Mech., 112(5), 448–464.
19.
Rostásy, F. S., and Laube, M. (1990). “Experimental and analytical planning tools to minimize thermal cracking of young concrete. RILEM Int. Workshop: Testing During Concrete Structures, H. W. Reinhardt, ed., Mainz, Germany.
20.
Rots, J. G., Nauta, P., Kusters, G. M., and Blaauwendraad, J. (1985). “Smeared crack approach and fracture localization in concrete.” Heron, Delft University of Technology, Delft, The Netherlands, 30(3).
21.
van Mier, J. G. M. (1986). “Fracture of concrete under complex stress.” Heron, Delft University of Technology, Delft, The Netherlands, 31(3).
22.
Walraven, J. C. (1980). “Aggregate interlock: a theoretical and experimental investigation,” PhD thesis, Delft University of Technology, Delft, The Netherlands.
23.
Willam, K., and Warnke, E. P. (1975). “Constitute model for the triaxial behavior of concrete.” Proc., Int. Assoc. for Bridge and Struct. Engrg., 19, Zürich, Switzerland.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Sep 20, 1993
Published online: Sep 1, 1994
Published in print: Sep 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.